SMA Connector Receptacle CONSMA005-R58 Equivalent & Substitute Parts

Part Overview

The CONSMA005-R58 is an SMA connector receptacle manufactured by TE Connectivity Linx, designed for 50 Ohm coaxial RF applications. This female socket connector features solder contact termination and panel mount installation with bulkhead front-side nut fastening. The part is RoHS compliant and currently active in production with 1123 units in stock. Equivalent and substitute parts are identified when design requirements permit variation in cable group compatibility, voltage rating, or frequency specifications while maintaining core electrical and mechanical functionality.

Substiute Parts

CONSMA005-R58

TE Connectivity LinxIn Stock: 1139CONSMA005-R58 Datasheet

Current PartRFQ

CONSMA005

TE Connectivity LinxIn Stock: 1087CONSMA005 Datasheet

Parametric EquivalentRFQ

CONSMA014-R178

TE Connectivity LinxIn Stock: 1494CONSMA014-R178 Datasheet

Parametric EquivalentRFQ

0732513802

MolexIn Stock: 12060732513802 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CONSMA005-R58 is determined by the following core parameters that must remain constant:

• Connector Style: SMA
• Connector Type: Receptacle, Female Socket
• Impedance: 50 Ohms
• Contact Termination: Solder
• Shield Termination: Crimp
• Mounting Type: Panel Mount
• Mounting Feature: Bulkhead - Front Side Nut
• Fastening Type: Threaded
• Operating Temperature: -65°C ~ 165°C
• Mating Cycles: 500

Substitution is permitted when the following parameters vary within acceptable design tolerances:

• Cable Group (RG-58, RG-174, RG-178)
• Frequency - Max (12.4 GHz to 18 GHz)
• Voltage Rating (250 V to 500 V)
• Manufacturer (TE Connectivity Linx, Molex)
• Packaging format (Bag, Bulk)

Parameter Comparison

Engineering Selection Recommendations

CONSMA005 (TE Connectivity Linx): Direct parametric equivalent with identical frequency and temperature specifications. Differs only in cable group (RG-174 vs. RG-58) and reduced voltage rating (335 V vs. 500 V). Suitable for applications where RG-174 cable compatibility is acceptable and voltage requirements do not exceed 335 V. RoHS compliant. 1034 units in stock.

CONSMA014-R178 (TE Connectivity Linx): Parametric equivalent with identical frequency and temperature specifications. Differs in cable group (RG-178 vs. RG-58) and reduced voltage rating (250 V vs. 500 V). Includes accessory kit (8 pcs: connector, contact, gasket, heat shrink, lockwasher, nut, spacer, support). Suitable for applications where RG-178 cable compatibility is acceptable and voltage requirements do not exceed 250 V. RoHS compliant. 1398 units in stock.

0732513802 (Molex): Similar part from alternative manufacturer with identical impedance, mounting, and termination specifications. Offers higher frequency capability (18 GHz vs. 12.4 GHz) and equivalent voltage rating (500 V). Cable group compatibility is RG-58, matching the main part. Includes accessory kit (5 pcs: connector, contact, ferrule, lockwasher, nut). RoHS status not specified by vendor. 1111 units in stock.

Frequently Asked Questions (FAQ)

Q: Can CONSMA005 be used as a direct replacement for CONSMA005-R58?

A: CONSMA005 is a parametric equivalent with the same electrical specifications (50 Ohms, 12.4 GHz, -65°C to 165°C). The primary difference is cable group compatibility (RG-174 vs. RG-58) and voltage rating (335 V vs. 500 V). Substitution is valid only if the application cable group is RG-174 and voltage requirements do not exceed 335 V.

Q: What is the difference between CONSMA014-R178 and CONSMA005-R58?

A: Both are SMA receptacle connectors with identical frequency response and temperature range. CONSMA014-R178 is specified for RG-178 cable and has a lower voltage rating (250 V vs. 500 V). It includes an accessory kit with eight components. Use CONSMA014-R178 only when RG-178 cable compatibility is required and voltage does not exceed 250 V.

Q: Is the Molex 0732513802 compatible with CONSMA005-R58?

A: The Molex 0732513802 is mechanically and electrically compatible for 50 Ohm SMA panel mount applications. It matches the RG-58 cable group and 500 V voltage rating of the main part. The Molex part offers higher frequency capability (18 GHz vs. 12.4 GHz). Substitution is valid for applications requiring the extended frequency range. Note that RoHS compliance status is not specified by the vendor.

Q: What does "Bulkhead - Front Side Nut" mounting feature mean?

A: This mounting feature indicates the connector is installed through a panel opening with the nut positioned on the front side of the panel. All listed parts share this mounting configuration, ensuring mechanical compatibility in panel mount applications.

Q: Are all substitute parts RoHS compliant?

A: CONSMA005-R58, CONSMA005, and CONSMA014-R178 are confirmed RoHS compliant. The Molex 0732513802 RoHS status is not specified by the vendor and must be verified with the manufacturer if RoHS compliance is a design requirement.

Q: What is the significance of the accessory kits included with CONSMA014-R178 and 0732513802?

A: CONSMA014-R178 includes eight components (connector, contact, gasket, heat shrink, lockwasher, nut, spacer, support). The Molex 0732513802 includes five components (connector, contact, ferrule, lockwasher, nut). These kits provide installation hardware and may reduce procurement complexity. Verify that included components meet your assembly requirements before substitution.