CONB14NF-S Equivalent & Substitute Parts

Part Overview

The CONB14NF-S is a 4-position circular connector plug with female sockets and wire leads, manufactured by Carlo Gavazzi Inc. This M12-4 connector features gold-plated mating contacts, threaded fastening, and IP67 ingress protection suitable for industrial applications requiring dust-tight and waterproof connections. The product is currently obsolete, making identification of active equivalent parts essential for ongoing system maintenance and new design implementations.

Substiute Parts

CONB14NF-S

Carlo Gavazzi Inc.In Stock: 1154CONB14NF-S Datasheet

Current PartRFQ

CONE14NF-S

Carlo Gavazzi Inc.In Stock: 1073CONE14NF-S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The CONE14NF-S qualifies as a direct substitute for the CONB14NF-S based on the following critical parameters:

Matching Parameters:

• Connector type: Plug, Female Sockets
• Number of positions: 4
• Shell size: M12-4
• Termination method: Wire Leads
• Fastening type: Threaded
• Orientation: Keyed
• Contact finish: Gold
• Ingress protection: IP67
• Current rating: 4A
• Voltage rating: 250VAC/DC
• Features: Backshell, Coupling Nut
• Shielding: Unshielded

Substitution Basis: The CONE14NF-S maintains electrical and mechanical compatibility through identical connector architecture, contact configuration, and environmental protection ratings. Both parts satisfy the same functional requirements for M12-4 circular connector applications with wire lead termination and gold-plated contacts.

Parameter Comparison

Engineering Selection Recommendations

The CONE14NF-S is the active equivalent for the obsolete CONB14NF-S. Selection of the CONE14NF-S is appropriate for new designs and replacement applications due to its active product status and compliance certifications. The substitute maintains all critical electrical and mechanical parameters required for M12-4 circular connector applications.

The CONE14NF-S provides an extended operating temperature range (-40°C ~ 105°C versus -25°C ~ 90°C), offering broader environmental capability. The substitute carries ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement.

Both parts are available in stock quantities sufficient for production and maintenance applications.

Frequently Asked Questions (FAQ)

Q: Can CONE14NF-S directly replace CONB14NF-S in existing installations?

A: Yes. Both connectors share identical M12-4 shell size, 4-position configuration, wire lead termination, threaded fastening, and IP67 protection. Mechanical and electrical compatibility is maintained across all critical parameters.

Q: What is the primary reason for substitution?

A: The CONB14NF-S is obsolete. The CONE14NF-S is the active Carlo Gavazzi equivalent maintaining the same connector architecture and performance specifications.

Q: Are there differences in mounting configuration?

A: The CONE14NF-S offers both free hanging in-line and right angle mounting options, while the CONB14NF-S is specified for free hanging in-line only. For applications requiring in-line orientation, both parts are functionally equivalent.

Q: What is the cable opening specification for each part?

A: CONB14NF-S specifies 0.142" ~ 0.197" (3.60mm ~ 5.00mm). CONE14NF-S specifies 0.205" (5.20mm). Verify cable diameter compatibility with your application requirements.

Q: Are there compliance differences between the parts?

A: The CONE14NF-S carries ROHS3 compliance and REACH unaffected certification. The CONB14NF-S compliance status is not specified. For applications requiring regulatory compliance documentation, the CONE14NF-S provides current certifications.

Q: What is the temperature operating range difference?

A: CONB14NF-S operates -25°C ~ 90°C. CONE14NF-S operates -40°C ~ 105°C. The substitute provides extended low and high temperature capability suitable for broader environmental applications.