COM-14863 Addressable LED Discrete Serial RGB Equivalent & Substitute Parts

Part Overview

The COM-14863 is an addressable lighting component featuring 3 discrete LEDs with Red, Green, Blue (RGB) color configuration. This Surface Mount device utilizes the APA102C LED controller and operates via Serial (Shift Register) interface. The component measures 5.00mm L x 5.00mm W and is ROHS3 compliant with MSL 1 rating. Currently in active production status with 875 units in stock, substitute parts may be required due to inventory constraints, packaging format preferences, or supply chain optimization.

Substiute Parts

COM-14863

SparkFun ElectronicsIn Stock: 911COM-14863 Datasheet

Current PartRFQ

BL-HBGR32L-3-TRB-8

American Bright Optoelectronics CorporationIn Stock: 16643BL-HBGR32L-3-TRB-8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the COM-14863 is determined by the following critical parameters:

• LED Count & Color: The substitute must support RGB color configuration with addressable discrete LEDs
• Controller Compatibility: APA102C utilization ensures protocol compatibility with existing designs
• Interface Standard: Serial (Shift Register) interface maintains signal compatibility
• Physical Form Factor: 5.00mm L x 5.00mm W dimensions ensure mechanical fit in PCB layouts
• Mounting Technology: Surface Mount configuration required for assembly compatibility
• Compliance Standards: ROHS3 compliance and EAR99 ECCN classification maintained across substitutes

The identified substitute BL-HBGR32L-3-TRB-8 shares the core electrical interface, LED controller type, color configuration, physical dimensions, and compliance certifications. Packaging format differs (Tape & Reel versus Bulk), and LED count configuration varies (1 LED versus 3 LEDs), which affects application suitability based on specific design requirements.

Parameter Comparison

Engineering Selection Recommendations

Both COM-14863 and BL-HBGR32L-3-TRB-8 maintain Active product status with ROHS3 compliance and identical ECCN/HTSUS classifications, confirming regulatory equivalence. The primary differentiation factors are LED count (3 versus 1) and packaging format (Bulk versus Tape & Reel).

Selection between these components should be based on:

• LED Count Requirements: COM-14863 provides 3 discrete LEDs per package; BL-HBGR32L-3-TRB-8 provides 1 LED per package. Design specifications must define the required LED quantity per addressable unit.
• Packaging Compatibility: COM-14863 Bulk packaging suits manual assembly and prototyping workflows. BL-HBGR32L-3-TRB-8 Tape & Reel format supports automated pick-and-place assembly and high-volume production.
• Moisture Handling: COM-14863 MSL 1 rating permits unlimited shelf life. BL-HBGR32L-3-TRB-8 MSL 5A rating requires 24-hour floor life management post-packaging.

Both components utilize identical APA102C controllers and Serial interface protocols, ensuring firmware and signal compatibility within the same design architecture.

Frequently Asked Questions (FAQ)

Q: Can BL-HBGR32L-3-TRB-8 directly replace COM-14863 in existing designs?

A: Direct replacement depends on LED count requirements. COM-14863 contains 3 LEDs per package while BL-HBGR32L-3-TRB-8 contains 1 LED per package. Both use identical APA102C controllers and Serial interface protocols. If your design requires 3 addressable LEDs per component, BL-HBGR32L-3-TRB-8 would require three separate packages to achieve equivalent functionality.

Q: What is the significance of the packaging format difference?

A: COM-14863 is supplied in Bulk packaging, suitable for manual handling and small-quantity applications. BL-HBGR32L-3-TRB-8 is supplied in Tape & Reel (TR) format, optimized for automated assembly equipment and production environments. Packaging format does not affect electrical performance but impacts assembly methodology and supply chain logistics.

Q: Are there compliance or regulatory differences between these parts?

A: Both components share identical RoHS3 compliance status, EAR99 ECCN classification, and 8541.41.0000 HTSUS code. No regulatory differentiation exists between the two parts.

Q: What does the MSL rating difference mean for component handling?

A: COM-14863 carries MSL 1 (Unlimited) rating, permitting indefinite shelf storage without moisture absorption concerns. BL-HBGR32L-3-TRB-8 carries MSL 5A (24 Hours) rating, requiring that the component be used within 24 hours of package opening. This affects storage protocols and production scheduling for high-volume assembly operations.

Q: Do both components use the same LED controller?

A: Yes. Both COM-14863 and BL-HBGR32L-3-TRB-8 utilize the APA102C LED controller, ensuring identical protocol compatibility and firmware integration within addressable lighting systems.