COM-14703 Electroluminescent EL Wire Red 3M Equivalent & Substitute Parts

Part Overview

The COM-14703 is a bendable electroluminescent EL wire manufactured by SparkFun Electronics, featuring a red color output with a 3-meter (9.84 feet) length. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design and procurement activities. The part operates as a standalone electroluminescent light source suitable for applications requiring flexible, low-profile illumination elements.

Substiute Parts

COM-14703

SparkFun ElectronicsIn Stock: 1025COM-14703 Datasheet

Current PartRFQ

69-ELW3.2-RD

NTE Electronics, IncIn Stock: 87569-ELW3.2-RD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the COM-14703 is determined by the following critical parameters:

• Configuration: Must be EL Wire format
• Color: Must be Red
• Length: Must be 9.84' (3m) or equivalent
• Electrical Function: Electroluminescent light emission capability

The substitute part 69-ELW3.2-RD meets all substitution criteria. Both parts share identical functional specifications: red electroluminescent output, 3-meter length, and EL wire configuration. The primary distinction lies in product status and compliance certifications rather than electrical or mechanical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

The 69-ELW3.2-RD represents a direct functional equivalent to the obsolete COM-14703. Selection between these parts should be based on the following factors:

For new designs or restocking: The 69-ELW3.2-RD is the appropriate choice due to its active product status and ROHS3 compliance certification. This part ensures long-term availability and meets current regulatory requirements for RoHS3 compliance.

For legacy system maintenance: The COM-14703 remains functionally identical to the substitute. However, given its obsolete status, procurement of the 69-ELW3.2-RD is recommended to avoid future supply chain constraints.

Compliance considerations: If RoHS3 compliance is a design requirement, the 69-ELW3.2-RD is mandatory. The original COM-14703 does not meet this standard.

Both parts share identical ECCN classification (EAR99), indicating no differential export control implications.

Frequently Asked Questions (FAQ)

Q: Can the 69-ELW3.2-RD directly replace the COM-14703 in existing applications?

A: Yes. Both parts are red electroluminescent EL wires with identical 3-meter length and configuration. Electrical and mechanical compatibility is confirmed.

Q: What is the significance of the "3.2MM DIA" specification in the 69-ELW3.2-RD part number?

A: This indicates the wire diameter is 3.2 millimeters. This dimension is consistent with standard EL wire specifications and does not affect functional substitution.

Q: Why is the COM-14703 listed as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. The 69-ELW3.2-RD provides continued access to equivalent functionality from an active supplier.

Q: Are there any compliance differences between these parts?

A: Yes. The 69-ELW3.2-RD is ROHS3 compliant, while the COM-14703 is RoHS non-compliant. For applications subject to RoHS3 requirements, the 69-ELW3.2-RD is the required choice.

Q: Does packaging differ between these parts?

A: The 69-ELW3.2-RD is supplied in bag packaging. The COM-14703 packaging specification is not defined in available documentation. This does not affect electrical or mechanical performance.

Q: Are both parts subject to the same export controls?

A: Yes. Both parts carry ECCN classification EAR99, indicating identical export control treatment.