CMR06F222JPDP Equivalent & Substitute Parts

Part Overview

The CMR06F222JPDP is a 2200 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE), rated for 500 V operation in radial through-hole configuration. This component is classified as Active product status and is suitable for general-purpose applications requiring stable capacitance and high voltage performance. Mica dielectric capacitors are selected for applications demanding low loss, excellent frequency stability, and reliable performance across extended temperature ranges. Substitute parts are identified when inventory constraints, lead time requirements, or procurement preferences necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

CMR06F222JPDP

Cornell Dubilier Electronics (CDE)In Stock: 822CMR06F222JPDP Datasheet

Current PartRFQ

CMR06F222JPDR

Cornell Dubilier Electronics (CDE)In Stock: 1086CMR06F222JPDR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CMR06F222JPDP are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

Electrical Parameters (Non-Negotiable):

• Capacitance value: 2200 pF
• Tolerance class: ±5%
• Voltage rating: 500 V
• Dielectric material: Mica

Thermal Parameters (Non-Negotiable):

• Operating temperature range: -55°C to 150°C

Mechanical Parameters (Non-Negotiable):

• Mounting type: Through Hole
• Package configuration: Radial
• Lead spacing: 0.350" (8.90 mm)
• Physical dimensions: 0.669" L × 0.252" W (17.00 mm × 6.40 mm)
• Seated height: 0.532" (13.50 mm)

Compliance Parameters (Non-Negotiable):

• RoHS3 Compliance
• MSL 1 classification

Only parts matching all parameters listed above are classified as direct substitutes. Parts are grouped within the CMR series from Cornell Dubilier Electronics, ensuring consistent manufacturing standards and performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

The CMR06F222JPDP and CMR06F222JPDR are parametrically equivalent components with identical electrical, mechanical, and compliance specifications. Both parts are manufactured by Cornell Dubilier Electronics within the CMR series and maintain Active product status, indicating ongoing manufacturing support and availability.

Compliance and Certification Basis:

Both parts satisfy ROHS3 compliance requirements and REACH unaffected status, making them suitable for applications subject to environmental and regulatory restrictions. MSL 1 classification indicates unlimited shelf life under standard storage conditions, eliminating moisture-related handling constraints.

Selection Logic:

Component selection between CMR06F222JPDP and CMR06F222JPDR should be based on:

• Inventory availability and lead time requirements
• Procurement source preferences
• Cost considerations within equivalent specifications
• Supply chain continuity planning

No technical differentiation exists between these parts. Both are suitable for direct substitution in applications requiring 2200 pF, 500 V mica capacitors with radial through-hole configuration and -55°C to 150°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can CMR06F222JPDR be used as a direct replacement for CMR06F222JPDP?

A: Yes. Both parts are parametrically equivalent across all electrical, mechanical, and compliance specifications. No circuit redesign or PCB layout modification is required for substitution.

Q: Are there any differences in the physical footprint between these parts?

A: No. Both parts share identical lead spacing (0.350" / 8.90 mm), dimensions (0.669" L × 0.252" W / 17.00 mm × 6.40 mm), and seated height (0.532" / 13.50 mm). PCB hole patterns and clearance requirements are identical.

Q: Do both parts meet the same environmental and regulatory standards?

A: Yes. Both CMR06F222JPDP and CMR06F222JPDR are ROHS3 compliant, REACH unaffected, and classified as MSL 1 with unlimited shelf life.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 150°C. This range applies to all electrical and mechanical specifications.

Q: Are there any voltage or capacitance differences between these parts?

A: No. Both parts are rated for 500 V and have a capacitance value of 2200 pF with ±5% tolerance. Dielectric material is mica for both.

Q: Which part should be selected if both are available?

A: Selection should be based on inventory availability, lead time, procurement source, and cost. No technical advantage exists for either part. Both are suitable for identical applications.

Q: Is the CMR series suitable for high-frequency applications?

A: Mica dielectric capacitors in the CMR series are characterized by low loss and excellent frequency stability. Specific frequency response data is not provided in the parametric specifications.

Q: What is the significance of MSL 1 classification?

A: MSL 1 indicates unlimited shelf life under standard storage conditions. No special moisture control or baking procedures are required prior to assembly.