CMR06F102JPDP Equivalent & Substitute Parts

Part Overview

The CMR06F102JPDP is a 1000 pF mica capacitor rated for 500 V operation, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable capacitance across extended temperature ranges. The part is currently active in production with full inventory availability. Equivalent substitute parts are identified to support procurement flexibility, supply chain continuity, and component sourcing alternatives when the primary part number becomes unavailable or when inventory constraints require alternative sourcing.

Substiute Parts

CMR06F102JPDP

Cornell Dubilier Electronics (CDE)In Stock: 970CMR06F102JPDP Datasheet

Current PartRFQ

CMR06F102JPDR

Cornell Dubilier Electronics (CDE)In Stock: 1026CMR06F102JPDR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CMR06F102JPDP is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must match the following criteria:

Electrical Parameters:

• Capacitance: 1000 pF (exact match)
• Tolerance: ±5% (exact match)
• Voltage Rating: 500 V (exact match)
• Dielectric Material: Mica (exact match)
• Operating Temperature Range: -55°C ~ 150°C (exact match)

Mechanical Parameters:

• Mounting Type: Through Hole (exact match)
• Package / Case: Radial (exact match)
• Lead Spacing: 0.350" (8.90mm) (exact match)
• Physical Dimensions: 0.650" L x 0.220" W (16.50mm x 5.60mm) (exact match)
• Height - Seated (Max): 0.520" (13.20mm) (exact match)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (exact match)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match)

Only parts meeting all specified parameters are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The CMR06F102JPDR is a direct parametric equivalent to the CMR06F102JPDP. Both parts are manufactured by Cornell Dubilier Electronics within the CMR series and share identical electrical specifications, mechanical dimensions, and compliance certifications.

Selection Basis:

Both parts are active products with ROHS3 compliance and MSL Level 1 rating, indicating unlimited moisture sensitivity protection. The identical lead spacing (0.350" / 8.90mm) and radial package configuration ensure direct PCB footprint compatibility. The matching operating temperature range (-55°C ~ 150°C) and voltage rating (500 V) confirm functional equivalence for high-voltage general-purpose applications.

Selection between CMR06F102JPDP and CMR06F102JPDR should be based on inventory availability and procurement lead times, as both parts are functionally and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can CMR06F102JPDR be used as a direct replacement for CMR06F102JPDP?

A: Yes. The CMR06F102JPDR is a parametric equivalent with identical capacitance (1000 pF), voltage rating (500 V), tolerance (±5%), dielectric material (mica), operating temperature range (-55°C ~ 150°C), and physical dimensions. Both parts feature radial through-hole mounting with 0.350" lead spacing and are ROHS3 compliant.

Q: Are there any differences in PCB footprint between these parts?

A: No. Both parts have identical lead spacing (0.350" / 8.90mm), physical dimensions (0.650" L x 0.220" W), and maximum seated height (0.520"). They are mechanically interchangeable on the same PCB layout.

Q: Do both parts meet the same compliance standards?

A: Yes. Both CMR06F102JPDP and CMR06F102JPDR are ROHS3 compliant with MSL Level 1 rating. Both are REACH unaffected and classified under ECCN EAR99.

Q: What is the difference between the part numbers?

A: The part numbers differ only in the final suffix (JPDP versus JPDR). This suffix variation typically indicates different packaging or distribution configurations from Cornell Dubilier Electronics, but the electrical and mechanical specifications remain identical.

Q: Can these parts be used in high-temperature applications?

A: Yes. Both parts are rated for operating temperatures from -55°C to 150°C, supporting extended temperature range applications within this specification.

Q: Are these parts suitable for high-voltage circuits?

A: Yes. Both parts are rated for 500 V operation and are designed for general-purpose high-voltage applications using mica dielectric material.