CMR06F102JPDM Equivalent & Substitute Parts

Part Overview

The CMR06F102JPDM is a 1000 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE), rated for 500 V operation. This through-hole radial component is designed for general-purpose applications requiring high reliability and stable capacitance across extended temperature ranges. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when inventory constraints, lead time requirements, or procurement preferences necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

CMR06F102JPDM

Cornell Dubilier Electronics (CDE)In Stock: 991CMR06F102JPDM Datasheet

Current PartRFQ

CMR06F102JPDR

Cornell Dubilier Electronics (CDE)In Stock: 1026CMR06F102JPDR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CMR06F102JPDM are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic requires exact matching of the following parameters:

Electrical Parameters: Capacitance value (1000 pF), tolerance (±5%), rated voltage (500 V), and dielectric material (mica) must be identical. These parameters define the component's functional performance in circuit applications.

Mechanical Parameters: Mounting type (through hole), package configuration (radial), and lead spacing (0.350" / 8.90 mm) must match to ensure PCB compatibility and assembly feasibility without design modifications.

Environmental & Compliance Parameters: Operating temperature range (-55°C to 150°C), RoHS3 compliance status, and moisture sensitivity level (MSL 1) must align with the original specification to maintain regulatory compliance and reliability standards.

Only components meeting all these criteria are classified as parametric equivalents and listed as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The CMR06F102JPDR is a direct parametric equivalent to the CMR06F102JPDM. Both components are manufactured by Cornell Dubilier Electronics within the CMR series and share identical electrical, mechanical, and environmental specifications. Selection between these parts should be based on:

Inventory Availability: The CMR06F102JPDR currently maintains 999 pieces in stock compared to 902 pieces for the CMR06F102JPDM, providing enhanced procurement flexibility.

Regulatory Compliance: Both parts maintain identical RoHS3 compliance status and REACH unaffected designation, ensuring equivalent regulatory standing for applications subject to environmental directives.

Product Status: Both components carry Active product status, confirming ongoing manufacturer support and supply chain stability.

Packaging Configuration: Both parts are supplied in bulk packaging with identical lead spacing and radial configuration, requiring no PCB design modifications for substitution.

No technical performance differentiation exists between these components. Selection may proceed based on availability, lead time, or procurement preference without functional impact.

Frequently Asked Questions (FAQ)

Q: Can CMR06F102JPDR be used as a direct replacement for CMR06F102JPDM in existing designs?

A: Yes. The CMR06F102JPDR is a parametric equivalent with identical capacitance (1000 pF), tolerance (±5%), voltage rating (500 V), temperature range (-55°C to 150°C), lead spacing (0.350"), and package configuration (radial through-hole). No circuit modifications or PCB layout changes are required.

Q: Are there any differences in RoHS compliance between these parts?

A: No. Both CMR06F102JPDM and CMR06F102JPDR maintain identical ROHS3 compliance status and REACH unaffected designation. Regulatory requirements are equivalent.

Q: Do these parts have the same physical dimensions?

A: Yes. Both components share identical dimensions: 0.650" L x 0.220" W (16.50 mm x 5.60 mm) with maximum seated height of 0.520" (13.20 mm). PCB footprints are identical.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard handling and storage procedures apply without special environmental controls.

Q: Are both parts currently in active production?

A: Yes. Both CMR06F102JPDM and CMR06F102JPDR maintain Active product status with Cornell Dubilier Electronics, confirming ongoing manufacturer support and supply availability.

Q: Can these mica capacitors be used in high-temperature applications?

A: Yes. Both components are rated for continuous operation across -55°C to 150°C, supporting extended temperature range applications within this specification window.