CMR06F102FODM Equivalent & Substitute Parts

Part Overview

The CMR06F102FODM is a 1000 pF mica capacitor rated for 500 V operation in a radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as Active product status and is suitable for general-purpose applications requiring high-reliability capacitive filtering and coupling in electronic circuits. Mica capacitors are selected for applications demanding stable capacitance over temperature, low loss, and excellent frequency response characteristics. Substitute parts are identified to provide equivalent electrical and mechanical performance when the primary part number is unavailable or when inventory constraints require alternative sourcing.

Substiute Parts

CMR06F102FODM

Cornell Dubilier Electronics (CDE)In Stock: 955CMR06F102FODM Datasheet

Current PartRFQ

CMR06F102FODR

Cornell Dubilier Electronics (CDE)In Stock: 848CMR06F102FODR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CMR06F102FODM is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters must remain identical for a part to qualify as a direct substitute:

• Capacitance Value: 1000 pF (exact match required)
• Tolerance: ±1% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.350" / 8.90 mm (exact match required)
• Physical Dimensions: 0.650" L × 0.220" W / 16.50 mm × 5.60 mm (exact match required)
• Height - Seated (Max): 0.520" / 13.20 mm (exact match required)

The CMR06F102FODR meets all substitution criteria and is classified as a parametric equivalent within the CMR series from Cornell Dubilier Electronics.

Parameter Comparison

Engineering Selection Recommendations

Both the CMR06F102FODM and CMR06F102FODR are Active product status components manufactured by Cornell Dubilier Electronics within the CMR series. Both parts carry ROHS3 compliance certification and REACH Unaffected status, confirming regulatory alignment for applications subject to environmental and hazardous substance restrictions.

The CMR06F102FODR is a direct parametric equivalent suitable for applications where the CMR06F102FODM is specified. Selection between these two part numbers may be determined by inventory availability, lead time requirements, or procurement source preferences. Both components deliver identical electrical performance, mechanical fit, and environmental compliance characteristics.

Current inventory status shows 871 pieces of CMR06F102FODM and 767 pieces of CMR06F102FODR available as new original stock, supporting flexible sourcing strategies.

Frequently Asked Questions (FAQ)

Q: Can the CMR06F102FODR be used as a direct replacement for the CMR06F102FODM in existing circuit designs?

A: Yes. The CMR06F102FODR is a parametric equivalent with identical capacitance, voltage rating, tolerance, dielectric material, operating temperature range, mounting type, package configuration, lead spacing, and physical dimensions. Direct substitution is supported without circuit modification.

Q: Are there differences in the radial lead configuration between these two part numbers?

A: No. Both parts feature identical radial through-hole mounting with 0.350" (8.90 mm) lead spacing and matching physical dimensions of 0.650" L × 0.220" W (16.50 mm × 5.60 mm). PCB footprint compatibility is maintained.

Q: Do both parts meet the same environmental and regulatory compliance standards?

A: Yes. Both the CMR06F102FODM and CMR06F102FODR carry ROHS3 compliance certification, REACH Unaffected status, and Moisture Sensitivity Level 1 (Unlimited). Regulatory requirements are identical.

Q: What is the tolerance specification for these mica capacitors?

A: Both parts are specified with ±1% tolerance on the 1000 pF capacitance value, ensuring tight capacitive accuracy for precision filtering and coupling applications.

Q: Are these components suitable for high-temperature applications?

A: Yes. Both parts are rated for continuous operation across the -55°C to 125°C temperature range, supporting applications in elevated ambient conditions and thermal cycling environments.

Q: What is the moisture sensitivity classification for these mica capacitors?

A: Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture-related storage or handling restrictions. Standard component storage practices apply.