CMF7010M000FKBF Equivalent & Substitute Parts

Part Overview

The CMF7010M000FKBF is a 10 MOhms ±1% metal film through-hole resistor rated at 1.75W with axial leads. Manufactured by Vishay Dale, this component features flame retardant coating and moisture resistance, designed for applications requiring high resistance values with tight tolerance specifications. The part maintains active product status with 1020 units in current inventory. Substitute parts may be required due to application-specific power dissipation requirements, availability constraints, or design modifications that permit operation at reduced power ratings.

Substiute Parts

CMF7010M000FKBF

Vishay DaleIn Stock: 1120CMF7010M000FKBF Datasheet

Current PartRFQ

CMF6010M000FKBF112

Vishay DaleIn Stock: 1206CMF6010M000FKBF112 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CMF7010M000FKBF is determined by the following critical parameters:

• Resistance Value: Must be 10 MOhms
• Tolerance: Must be ±1%
• Composition: Must be Metal Film
• Temperature Coefficient: Must be ±100ppm/°C
• Operating Temperature Range: Must be -55°C ~ 175°C
• Package Type: Must be Axial
• Features: Must include Flame Retardant Coating, Moisture Resistant, Safety

The CMF6010M000FKBF112 qualifies as a substitute part. While the power rating is reduced from 1.75W to 1W, all electrical characteristics and material properties remain identical. This substitution is valid only when circuit design permits operation at the lower power dissipation level.

Parameter Comparison

Engineering Selection Recommendations

Both the CMF7010M000FKBF and CMF6010M000FKBF112 maintain active product status with current manufacturer support. Selection between these parts depends solely on circuit power dissipation requirements. The CMF7010M000FKBF provides 1.75W capacity, while the CMF6010M000FKBF112 operates at 1W. Both parts share identical compliance classifications: RoHS non-compliant and REACH Affected status. Component selection should be based on calculated power dissipation in the application circuit to ensure the chosen part rating does not create thermal stress or reliability concerns.

Frequently Asked Questions (FAQ)

Q: Can the CMF6010M000FKBF112 replace the CMF7010M000FKBF in all applications?

A: The CMF6010M000FKBF112 can replace the CMF7010M000FKBF only when circuit design permits operation at 1W power dissipation. If the application requires power dissipation exceeding 1W, the substitute part is not suitable.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Both parts share identical resistance value (10 MOhms), tolerance (±1%), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 175°C). The only difference is power rating.

Q: Do these parts have different physical dimensions?

A: Yes. The CMF7010M000FKBF measures 0.180" Dia x 0.562" L (4.57mm x 14.27mm), while the CMF6010M000FKBF112 measures 0.145" Dia x 0.344" L (3.68mm x 8.74mm). Physical space constraints may affect substitution feasibility.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS non-compliant and REACH Affected. Compliance requirements for your application must be verified independently.

Q: Are both parts currently available?

A: Yes. The CMF7010M000FKBF has 1020 units in inventory, and the CMF6010M000FKBF112 has 1100 units in inventory.