CMF60100R00FLR6 Equivalent & Substitute Parts

Part Overview

The CMF60100R00FLR6 is a 100 Ohms ±1% 1W through hole resistor manufactured by Vishay Dale in the CMF series. This metal film axial resistor features flame retardant coating and moisture resistant properties, designed for applications requiring precision resistance in a compact axial package. The part is currently active in production with 1046 units in stock. Substitute parts are necessary to accommodate different packaging requirements, tolerance specifications, or inventory availability across supply chain channels.

Substiute Parts

CMF60100R00FLR6

Vishay DaleIn Stock: 1090CMF60100R00FLR6 Datasheet

Current PartRFQ

CMF60100R00BEBF

Vishay DaleIn Stock: 687CMF60100R00BEBF Datasheet

UpgradeRFQ

CMF60100R00FKR6

Vishay DaleIn Stock: 5153CMF60100R00FKR6 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CMF60100R00FLR6 is determined by the following critical parameters:

• Resistance Value: Must be 100 Ohms
• Power Rating: Must be 1W
• Composition: Must be Metal Film
• Package Type: Must be Axial
• Physical Dimensions: Must match 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Operating Temperature Range: Must support -55°C ~ 175°C
• Features: Must include Flame Retardant Coating and Moisture Resistant properties

Variations in tolerance, temperature coefficient, and packaging format (Tape & Reel, Cut Tape, or Bulk) do not prevent substitution when all core electrical and mechanical parameters are met. The two identified substitute parts maintain identical resistance, power rating, composition, package type, and physical dimensions while differing in packaging configuration and tolerance specifications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and identical compliance classifications (RoHS non-compliant, REACH Affected). Selection between CMF60100R00FLR6, CMF60100R00FKR6, and CMF60100R00BEBF should be based on packaging requirements and tolerance specifications:

CMF60100R00FLR6 (Tape & Reel packaging) is suitable for high-volume automated assembly operations requiring continuous reel feeding.

CMF60100R00FKR6 (Cut Tape packaging) accommodates moderate-volume applications or mixed component assembly where individual tape segments are preferred over continuous reels.

CMF60100R00BEBF (Bulk packaging) provides the tightest tolerance specification at ±0.1% and the lowest temperature coefficient at ±25ppm/°C, making it appropriate for precision applications requiring enhanced stability. This part is available in bulk format.

All three parts are electrically and mechanically interchangeable within circuits designed for the CMF60 100 Ohm 1W metal film resistor specification.

Frequently Asked Questions (FAQ)

Q: Can CMF60100R00FKR6 replace CMF60100R00FLR6 in production assembly?

A: Yes. Both parts are identical in electrical specifications (100 Ohms ±1%, 1W) and physical dimensions (0.145" Dia x 0.344" L). The difference is packaging format: CMF60100R00FLR6 uses Tape & Reel while CMF60100R00FKR6 uses Cut Tape. Assembly equipment compatibility with Cut Tape format must be verified.

Q: What is the advantage of CMF60100R00BEBF over the other substitutes?

A: CMF60100R00BEBF offers ±0.1% tolerance compared to ±1% in the other parts, and a temperature coefficient of ±25ppm/°C versus ±150ppm/°C or ±100ppm/°C. These specifications provide superior precision and thermal stability for applications requiring tighter resistance accuracy across temperature variations.

Q: Are all three parts suitable for the same operating temperature range?

A: Yes. All three parts operate across -55°C ~ 175°C, ensuring thermal compatibility in equivalent applications.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel, Cut Tape, and Bulk packaging formats do not alter the electrical characteristics of the resistor. Packaging selection is determined by assembly process requirements and inventory management practices.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the circuit design accommodates the axial package type and the specified resistance, power rating, and tolerance values. All three parts meet these core requirements.