CMF072M0000GLBF Equivalent & Substitute Parts

Part Overview

The CMF072M0000GLBF is a 2 MOhms ±2% metal film through-hole resistor rated at 0.5W (1/2W) in axial package configuration. Manufactured by Vishay Dale, this component features flame retardant coating and moisture resistance suitable for industrial and commercial applications. The part maintains active product status with 784 units in current inventory. Substitute parts may be required due to design optimization needs, tolerance upgrades, or supply chain considerations while maintaining functional equivalence within specified electrical and mechanical parameters.

Substiute Parts

CMF072M0000GLBF

Vishay DaleIn Stock: 843CMF072M0000GLBF Datasheet

Current PartRFQ

CMF552M0000FKBF

Vishay DaleIn Stock: 877CMF552M0000FKBF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The CMF552M0000FKBF qualifies as a direct substitute for the CMF072M0000GLBF based on the following allowed electrical and mechanical parameters:

Matching Parameters:

• Resistance value: 2 MOhms (identical)
• Power rating: 0.5W (1/2W) (identical)
• Composition: Metal Film (identical)
• Package type: Axial (identical)
• Operating temperature range: -55°C to 175°C (identical)
• Physical dimensions: 0.090" Dia x 0.240" L (2.29mm x 6.10mm) (identical)
• Features: Flame Retardant Coating, Moisture Resistant, Safety (identical)
• Terminations: 2 (identical)

Upgraded Parameter:

• Tolerance: ±1% (CMF552M0000FKBF) versus ±2% (CMF072M0000GLBF) — represents improved tolerance specification

The substitute maintains all critical electrical and mechanical compatibility while offering enhanced tolerance performance.

Parameter Comparison

Engineering Selection Recommendations

Both CMF072M0000GLBF and CMF552M0000FKBF maintain identical product status (Active) and equivalent compliance profiles (RoHS non-compliant, REACH Affected). Selection between these parts depends on tolerance requirements: the CMF072M0000GLBF provides ±2% tolerance specification, while the CMF552M0000FKBF offers improved ±1% tolerance with a lower temperature coefficient (±100ppm/°C versus ±150ppm/°C). Both components are manufactured by Vishay Dale and share identical electrical ratings, physical dimensions, and environmental operating ranges. Circuit designs requiring tighter tolerance control benefit from the CMF552M0000FKBF specification.

Frequently Asked Questions (FAQ)

Q: Can CMF552M0000FKBF replace CMF072M0000GLBF in existing designs?

A: Yes. Both parts share identical resistance (2 MOhms), power rating (0.5W), package type (Axial), physical dimensions (0.090" Dia x 0.240" L), and operating temperature range (-55°C to 175°C). The substitute features improved tolerance (±1% versus ±2%) and lower temperature coefficient, making it functionally compatible for direct substitution.

Q: What is the primary difference between these two resistors?

A: The CMF552M0000FKBF provides tighter tolerance specification (±1%) compared to the CMF072M0000GLBF (±2%), along with a lower temperature coefficient (±100ppm/°C versus ±150ppm/°C). All other electrical and mechanical parameters remain identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.090" diameter by 0.240" length (2.29mm x 6.10mm) in axial configuration, ensuring identical PCB footprint and mounting compatibility.

Q: Do both parts meet the same compliance requirements?

A: Both CMF072M0000GLBF and CMF552M0000FKBF share identical compliance status: RoHS non-compliant and REACH Affected. No compliance advantage exists between the two parts.

Q: Which part should be selected for precision circuit applications?

A: The CMF552M0000FKBF is suitable for applications requiring tighter tolerance control due to its ±1% specification and lower temperature coefficient compared to the ±2% tolerance of the CMF072M0000GLBF.