CM07FD682FO3 Equivalent & Substitute Parts

Part Overview

The CM07FD682FO3 is a 6800 pF mica capacitor rated for 500 V operation in radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active product status and serves general-purpose applications requiring high-voltage, low-loss capacitance. Substitute parts are identified to address inventory availability, compliance requirements, or series preference while maintaining electrical and mechanical compatibility.

Substiute Parts

CM07FD682FO3

Cornell Dubilier Electronics (CDE)In Stock: 886CM07FD682FO3 Datasheet

Current PartRFQ

CD30FD682FO3

Cornell Dubilier Electronics (CDE)In Stock: 1184CD30FD682FO3 Datasheet

Parametric EquivalentRFQ

CD30FD682FO3F

Cornell Dubilier Electronics (CDE)In Stock: 1111CD30FD682FO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CM07FD682FO3 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Capacitance: 6800 pF
• Tolerance: ±1%
• Voltage - Rated: 500 V
• Dielectric Material: Mica
• Operating Temperature Range: -55°C ~ 125°C

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: Radial
• Lead Spacing: 0.437" (11.10mm)
• Physical Dimensions: 0.780" L x 0.299" W (19.80mm x 7.60mm)
• Height - Seated (Max): 0.882" (22.40mm)

Identified Substitutes:

• CD30FD682FO3
• CD30FD682FO3F

Both substitute parts maintain identical electrical and mechanical specifications. Differences exist only in series designation (CD30 vs. CM07), RoHS compliance status, and REACH classification.

Parameter Comparison

Engineering Selection Recommendations

CM07FD682FO3 (Original Part):

• Active product status with 786 units in stock
• RoHS non-compliant; REACH Affected
• Suitable for applications without RoHS or REACH compliance requirements
• Moisture Sensitivity Level: 1 (Unlimited)

CD30FD682FO3 (Substitute):

• Active product status with 1079 units in stock
• RoHS non-compliant; REACH Affected
• Identical electrical and mechanical specifications to CM07FD682FO3
• Series upgrade from CM07 to CD30
• Moisture Sensitivity Level: Not Applicable
• Selection appropriate when CD30 series preference exists without compliance constraints

CD30FD682FO3F (Substitute):

• Active product status with 1075 units in stock
• ROHS3 Compliant; REACH Unaffected
• Identical electrical and mechanical specifications to CM07FD682FO3
• Series upgrade from CM07 to CD30
• Moisture Sensitivity Level: Not Applicable
• Selection appropriate for applications requiring RoHS3 compliance or REACH exemption

All three parts are electrically and mechanically interchangeable. Selection between them depends on compliance certification requirements and series preference.

Frequently Asked Questions (FAQ)

Q: Are the CM07FD682FO3 and CD30FD682FO3 electrically interchangeable?

A: Yes. Both parts share identical capacitance (6800 pF), tolerance (±1%), voltage rating (500 V), dielectric material (Mica), and operating temperature range (-55°C ~ 125°C). The difference is series designation (CM07 vs. CD30) and compliance status.

Q: Can the CD30FD682FO3F replace the CM07FD682FO3 in existing designs?

A: Yes, from an electrical and mechanical standpoint. The CD30FD682FO3F maintains all critical parameters: capacitance, voltage rating, tolerance, lead spacing (0.437"), physical dimensions (0.780" L x 0.299" W), and height (0.882" max). The primary difference is RoHS3 compliance and REACH exemption status.

Q: What is the difference between CD30FD682FO3 and CD30FD682FO3F?

A: Both are CD30 series parts with identical electrical and mechanical specifications. The distinction is compliance: CD30FD682FO3 is RoHS non-compliant and REACH Affected, while CD30FD682FO3F is ROHS3 Compliant and REACH Unaffected.

Q: Will the radial lead spacing remain the same across all three parts?

A: Yes. All three parts maintain 0.437" (11.10mm) lead spacing, ensuring PCB footprint compatibility.

Q: Are there any differences in operating temperature range between these parts?

A: No. All three parts operate across the identical temperature range of -55°C ~ 125°C.

Q: Which part should be selected for new designs?

A: Selection depends on compliance requirements. For RoHS3 and REACH-compliant applications, use CD30FD682FO3F. For applications without these constraints, CM07FD682FO3 or CD30FD682FO3 are suitable based on series preference and inventory availability.