CM07FD562JO3 Mica Capacitor Equivalent & Substitute Parts

Part Overview

The CM07FD562JO3 is a 5600 pF mica capacitor rated for 500 V operation in a radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active and suitable for general-purpose applications requiring stable capacitance and high voltage performance. Mica dielectric capacitors are selected for applications demanding low loss, excellent frequency stability, and reliable operation across extended temperature ranges from -55°C to 125°C.

Substitute parts become necessary when the original series experiences supply constraints, when design requirements mandate enhanced compliance certifications, or when inventory availability requires alternative sourcing from the same manufacturer's product portfolio.

Substiute Parts

CM07FD562JO3

Cornell Dubilier Electronics (CDE)In Stock: 1066CM07FD562JO3 Datasheet

Current PartRFQ

CD30FD562JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1065CD30FD562JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for mica capacitors is determined by strict equivalence across electrical and mechanical parameters. The CM07FD562JO3 and its identified substitute CD30FD562JO3F share identical electrical specifications: 5600 pF capacitance, ±5% tolerance, 500 V rated voltage, and mica dielectric construction. Both components operate across the full -55°C to 125°C temperature range and employ radial through-hole mounting with 0.437" (11.10 mm) lead spacing.

The substitution relationship is valid because both parts satisfy the following critical parameters:

• Capacitance value: 5600 pF (exact match)
• Tolerance: ±5% (exact match)
• Voltage rating: 500 V (exact match)
• Dielectric: Mica (exact match)
• Temperature range: -55°C to 125°C (exact match)
• Mounting: Through Hole Radial (exact match)
• Lead spacing: 0.437" / 11.10 mm (exact match)
• Physical dimensions: Compatible within tolerance (19.80–19.81 mm length)

The primary distinction between these parts lies in product series designation (CM07 versus CD30) and compliance certifications. The CD30FD562JO3F represents an updated series offering enhanced RoHS3 compliance and REACH unaffected status, whereas the CM07FD562JO3 is RoHS non-compliant and REACH affected.

Parameter Comparison

Engineering Selection Recommendations

CM07FD562JO3 is appropriate for applications where RoHS compliance is not mandated and REACH substance restrictions do not apply. This part remains active in the product portfolio and is suitable for legacy designs or non-regulated environments.

CD30FD562JO3F is the preferred selection for new designs, particularly those subject to RoHS3 regulatory requirements or REACH compliance obligations. The CD30 series represents the current generation of Cornell Dubilier mica capacitors with enhanced environmental compliance. This part is recommended for applications in regulated industries, consumer electronics destined for European markets, or any design requiring documented compliance with modern environmental standards.

Both parts deliver identical electrical performance and mechanical compatibility. The selection between them depends solely on compliance certification requirements and regulatory environment of the end application.

Frequently Asked Questions (FAQ)

Q: Can CM07FD562JO3 and CD30FD562JO3F be used interchangeably on the same PCB?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical capacitance (5600 pF), tolerance (±5%), voltage rating (500 V), lead spacing (0.437"), and physical dimensions. Direct substitution is possible without circuit redesign or PCB layout modification.

Q: What is the difference between these two part numbers?

A: The primary differences are product series designation and compliance certifications. CM07FD562JO3 belongs to the CM07 series and is RoHS non-compliant with REACH affected status. CD30FD562JO3F belongs to the CD30 series and is RoHS3 compliant with REACH unaffected status. Electrical and mechanical specifications are identical.

Q: Which part should I specify for a new design?

A: Specify CD30FD562JO3F for new designs. The CD30 series represents the current generation with RoHS3 compliance and REACH unaffected status, ensuring compatibility with modern regulatory requirements and long-term supply chain stability.

Q: Are there any temperature or voltage derating considerations between these parts?

A: No. Both parts operate identically across the -55°C to 125°C temperature range and are rated for 500 V operation. No derating differences exist between the two parts.

Q: What is the lead spacing, and does it fit standard 0.4" pitch PCB layouts?

A: Lead spacing is 0.437" (11.10 mm). This spacing accommodates standard through-hole PCB designs with 0.4" or 0.5" pitch grid patterns. Verify specific PCB footprint requirements during layout design.

Q: Is moisture sensitivity a concern for either part?

A: CM07FD562JO3 carries MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. CD30FD562JO3F lists MSL as Not Applicable, also indicating no moisture-related handling constraints. Both parts can be stored and handled under standard industrial conditions without special moisture control measures.

Q: Can I substitute CM07FD562JO3 with CD30FD562JO3F in an existing assembly?

A: Yes. The parts are mechanically and electrically equivalent. Substitution requires no circuit modifications, PCB rework, or functional testing beyond standard quality assurance procedures.