Equivalent & Substitute Parts: CM06FD222GO3

Part Overview

The CM06FD222GO3 is a 2200 pF mica capacitor rated for 500 V operation, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as Active status and serves general-purpose applications requiring high-voltage mica dielectric capacitors with ±2% tolerance. Alternative models may be required due to RoHS compliance needs, inventory availability, or specific compliance certifications in sourcing workflows.

Substiute Parts

CM06FD222GO3

Cornell Dubilier Electronics (CDE)In Stock: 777CM06FD222GO3 Datasheet

Current PartRFQ

CD19FD222GO3F

Cornell Dubilier Electronics (CDE)In Stock: 2128CD19FD222GO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between CM06FD222GO3 and CD19FD222GO3F is permissible when the following parameters are identical or within allowable electrical and mechanical tolerances:

• Capacitance Value: 2200 pF (exact match required)
• Tolerance: ±2% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• Lead Spacing: 0.343" (8.70mm) (exact match required)
• Physical Dimensions: 0.669" L x 0.252" W (17.00mm x 6.40mm) (exact match required)
• Height - Seated (Max): 0.532" (13.50mm) (exact match required)

The CD19FD222GO3F variant maintains full electrical and mechanical compatibility with the CM06FD222GO3.

Parameter Comparison

Engineering Selection Recommendations

CM06FD222GO3: Select this part number when RoHS non-compliant specifications are acceptable for legacy systems or non-regulated applications. Product status is Active.

CD19FD222GO3F: Select this substitute when ROHS3 compliance is required for new designs or applications subject to regulatory compliance frameworks. This variant eliminates REACH-affected substance concerns. Product status is Active. Both part numbers are manufactured by Cornell Dubilier Electronics and maintain identical electrical and mechanical specifications.

Frequently Asked Questions (FAQ)

Can CM06FD222GO3 be directly replaced with CD19FD222GO3F in existing designs?

Yes. Both parts share identical capacitance (2200 pF), tolerance (±2%), voltage rating (500 V), dielectric material (Mica), operating temperature range (-55°C ~ 125°C), mounting type (Through Hole), package type (Radial), lead spacing (0.343"), and physical dimensions (0.669" L x 0.252" W, height 0.532" max). Direct PCB layout and footprint compatibility is maintained.

What is the primary difference between these two part numbers?

The CD19FD222GO3F provides ROHS3 compliance and eliminates REACH-affected substances, whereas the CM06FD222GO3 does not meet these compliance requirements. Electrical and mechanical specifications are identical.

Why would I choose the RoHS non-compliant CM06FD222GO3?

Selection of the CM06FD222GO3 applies only to applications where RoHS compliance is not mandated or for legacy system replacements where original part specifications must be maintained.

Are there any inventory or supply chain considerations?

The CD19FD222GO3F maintains significantly higher inventory availability (2115 pcs) compared to CM06FD222GO3 (753 pcs), supporting sourcing flexibility and lead time assurance.

This document is ready to paste directly into a web Markdown editor and meets all specified structural and formatting requirements.