CM06FD152JO3 Equivalent & Substitute Parts

Part Overview

The CM06FD152JO3 is a 1500 pF mica capacitor rated for 500 V operation, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component is designed for general-purpose applications requiring high voltage and stable capacitance performance across the operating temperature range of -55°C to 125°C. The part is currently active in production with 640 units in stock.

Substitute parts are identified to address inventory availability, compliance requirements, or series transitions while maintaining electrical and mechanical compatibility.

Substiute Parts

CM06FD152JO3

Cornell Dubilier Electronics (CDE)In Stock: 668CM06FD152JO3 Datasheet

Current PartRFQ

CD19FD152JO3

Cornell Dubilier Electronics (CDE)In Stock: 1069CD19FD152JO3 Datasheet

Parametric EquivalentRFQ

CD19FD152JO3F

Cornell Dubilier Electronics (CDE)In Stock: 889CD19FD152JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CM06FD152JO3 is based on strict equivalence of the following electrical and mechanical parameters:

• Capacitance Value: 1500 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.343" (8.70mm) (exact match required)
• Physical Dimensions: 0.661" L x 0.228" W, Height 0.520" max (exact match required)

The identified substitute parts CD19FD152JO3 and CD19FD152JO3F are from the CD19 series and meet all electrical and mechanical requirements for direct substitution. Both parts are manufactured by Cornell Dubilier Electronics and maintain identical performance characteristics within the specified parameters.

Parameter Comparison

Engineering Selection Recommendations

CM06FD152JO3 (Original Part)

The CM06FD152JO3 remains the primary specification for applications where the original series designation is required. This part is RoHS non-compliant and REACH Affected, which may restrict use in certain regulated markets or applications with strict environmental compliance requirements.

CD19FD152JO3 (Substitute - Standard Compliance)

The CD19FD152JO3 provides direct electrical and mechanical substitution with identical performance parameters. This part maintains the same RoHS non-compliant and REACH Affected status as the original CM06FD152JO3. Selection of this substitute is appropriate when series transition from CM06 to CD19 is acceptable and higher inventory availability (1013 units) is beneficial.

CD19FD152JO3F (Substitute - Enhanced Compliance)

The CD19FD152JO3F is the compliance-enhanced variant of the CD19 series, offering ROHS3 compliance and REACH Unaffected status. This part is suitable for applications requiring adherence to current environmental regulations and restricted substance directives. All electrical and mechanical parameters remain identical to the original specification. This variant provides the highest compliance posture among the three options.

Frequently Asked Questions (FAQ)

Q: Can CD19FD152JO3 and CD19FD152JO3F be used interchangeably with CM06FD152JO3?

A: Yes. Both CD19 series parts meet all electrical and mechanical requirements for direct substitution. The capacitance, voltage rating, tolerance, operating temperature range, physical dimensions, and lead spacing are identical across all three parts.

Q: What is the difference between CD19FD152JO3 and CD19FD152JO3F?

A: The primary differences are compliance certifications. CD19FD152JO3F is ROHS3 Compliant and REACH Unaffected, while CD19FD152JO3 is RoHS non-compliant and REACH Affected. Electrically and mechanically, both parts are identical.

Q: Which substitute should be selected for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance and REACH compliance, CD19FD152JO3F is the appropriate choice. For applications without such requirements, either CD19 variant provides equivalent performance.

Q: Are the physical dimensions identical for all three parts?

A: Yes. All three parts share identical dimensions: 0.661" L x 0.228" W (16.80mm x 5.80mm), with a maximum seated height of 0.520" (13.20mm), and lead spacing of 0.343" (8.70mm). PCB layout and mechanical fit are identical.

Q: What is the lead spacing for these radial capacitors?

A: The lead spacing is 0.343 inches (8.70 millimeters) for all three parts. This dimension is critical for PCB footprint compatibility.

Q: Are there inventory differences between the substitute parts?

A: Yes. CM06FD152JO3 has 640 units in stock, CD19FD152JO3 has 1013 units, and CD19FD152JO3F has 850 units available. Inventory levels may influence selection when lead time is a consideration.

Q: Do all three parts operate across the same temperature range?

A: Yes. All parts operate from -55°C to 125°C, providing identical thermal performance characteristics.