CM06FD132FO3 Equivalent & Substitute Parts

Part Overview

The CM06FD132FO3 is a 1300 pF mica capacitor rated for 500 V operation in a radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as a general-purpose mica capacitor with ±1% tolerance and operates across the temperature range of -55°C to 125°C. The part maintains Active product status and is available in bulk packaging with 652 units in current inventory.

Mica capacitors in this specification are essential for applications requiring high stability, low loss, and reliable performance in demanding electrical environments. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

CM06FD132FO3

Cornell Dubilier Electronics (CDE)In Stock: 723CM06FD132FO3 Datasheet

Current PartRFQ

CD19FD132FO3

Cornell Dubilier Electronics (CDE)In Stock: 876CD19FD132FO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CM06FD132FO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 1300 pF (exact match required)
• Tolerance: ±1% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.343" (8.70mm) (exact match required)
• Physical Dimensions: 0.661" L x 0.220" W, Height 0.520" max (exact match required)

The substitute part CD19FD132FO3 meets all critical electrical and mechanical parameters, differing only in series designation (CD19 versus CM06) and manufacturer compliance documentation. Both parts are manufactured by Cornell Dubilier Electronics and maintain identical functional specifications.

Parameter Comparison

Engineering Selection Recommendations

Both CM06FD132FO3 and CD19FD132FO3 are Active products manufactured by Cornell Dubilier Electronics with identical electrical and mechanical specifications. Selection between these parts should be based on the following factors:

Inventory Availability: CD19FD132FO3 maintains higher stock levels (852 units) compared to CM06FD132FO3 (652 units), supporting extended procurement windows and reduced lead times.

Compliance Alignment: Both parts share identical RoHS non-compliance and REACH Affected status. Organizations with specific compliance requirements should evaluate these designations against project specifications prior to selection.

Series Designation: The CM06 and CD19 series designations reflect different product lines within the Cornell Dubilier mica capacitor portfolio. Series selection may be driven by existing design documentation, supplier agreements, or internal standardization practices.

Regulatory Classification: Both parts carry identical ECCN (EAR99) and HTSUS (8532.29.0020) classifications, ensuring consistent export control and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can CM06FD132FO3 and CD19FD132FO3 be used interchangeably in circuit designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters: 1300 pF capacitance, ±1% tolerance, 500 V rating, mica dielectric, -55°C to 125°C operating range, radial through-hole mounting, and identical physical dimensions. Direct substitution is supported without circuit modification.

Q: What are the physical mounting differences between these parts?

A: No physical mounting differences exist. Both parts feature identical radial through-hole configuration with 0.343" (8.70mm) lead spacing, 0.661" L x 0.220" W body dimensions, and 0.520" maximum seated height. PCB footprints and mounting procedures are identical.

Q: Are there compliance or certification differences between CM06FD132FO3 and CD19FD132FO3?

A: No compliance differences exist. Both parts carry identical RoHS non-compliant and REACH Affected designations. ECCN and HTSUS classifications are identical (EAR99 and 8532.29.0020 respectively). Regulatory treatment is equivalent.

Q: Which part should be selected for new designs?

A: Selection should be based on inventory availability, existing supplier relationships, and internal standardization practices. Both parts are Active products with identical specifications. CD19FD132FO3 offers higher current inventory (852 units versus 652 units).

Q: Are there temperature performance differences between these parts?

A: No. Both parts operate across the identical temperature range of -55°C to 125°C with equivalent performance characteristics across this range.

Q: What is the tolerance specification for both parts?

A: Both CM06FD132FO3 and CD19FD132FO3 maintain ±1% capacitance tolerance, ensuring precise value matching for applications requiring tight tolerance specifications.