CM06FD102GO3 Mica Capacitor Equivalent & Substitute Parts

Part Overview

The CM06FD102GO3 is a 1000 pF mica capacitor rated for 500 V operation in radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as Active product status with 738 units in current inventory. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain performance specifications across equivalent product lines within the same manufacturer's portfolio.

Substiute Parts

CM06FD102GO3

Cornell Dubilier Electronics (CDE)In Stock: 759CM06FD102GO3 Datasheet

Current PartRFQ

CD19FD102GO3F

Cornell Dubilier Electronics (CDE)In Stock: 737CD19FD102GO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The CD19FD102GO3F qualifies as a parametric equivalent to the CM06FD102GO3 based on matching critical electrical and mechanical parameters. Both parts maintain identical capacitance (1000 pF), voltage rating (500 V), tolerance (±2%), dielectric material (Mica), mounting configuration (Through Hole Radial), lead spacing (0.343" / 8.70mm), operating temperature range (-55°C ~ 125°C), physical dimensions (0.650" L x 0.220" W), and maximum seated height (0.520"). The substitution logic is based on these eight core parameters: capacitance value, voltage rating, tolerance specification, dielectric composition, mounting type, case package, lead spacing, and thermal operating range. Both parts fall within the General Purpose feature classification and share the same ECCN (EAR99) and HTSUS (8532.29.0020) coding.

Parameter Comparison

Engineering Selection Recommendations

Both the CM06FD102GO3 and CD19FD102GO3F are Active product status components from Cornell Dubilier Electronics, ensuring continued manufacturing support and availability. A key distinction exists in regulatory compliance: the CM06FD102GO3 is RoHS non-compliant, while the CD19FD102GO3F is ROHS3 compliant. For applications requiring ROHS3 compliance, the CD19FD102GO3F is the appropriate selection. For applications with no RoHS requirement or existing systems using non-compliant components, either part remains functionally equivalent. The CM06FD102GO3 carries REACH Affected status, whereas the CD19FD102GO3F is REACH Unaffected, representing an additional regulatory advantage for the CD19 series component in restricted substance management contexts. Both parts are classified under ECCN EAR99 and HTSUS 8532.29.0020.

Frequently Asked Questions (FAQ)

Q: Can the CD19FD102GO3F be used as a direct replacement for the CM06FD102GO3 in circuit board assembly?

A: Yes. Both parts share identical electrical parameters (1000 pF, 500 V, ±2%), dielectric material (Mica), mounting type (Through Hole Radial), lead spacing (0.343"), and physical dimensions. Direct board-level substitution is supported without circuit redesign.

Q: What is the primary advantage of selecting CD19FD102GO3F over CM06FD102GO3?

A: The CD19FD102GO3F is ROHS3 compliant and REACH Unaffected, compared to the CM06FD102GO3 which is RoHS non-compliant and REACH Affected. Applications requiring environmental compliance certification should specify the CD19FD102GO3F.

Q: Are there differences in operating temperature range between these parts?

A: No. Both parts operate across the identical temperature range of -55°C to 125°C, supporting equivalent thermal performance in the target application.

Q: Do these parts fit the same PCB footprint?

A: Yes. Identical lead spacing (0.343" / 8.70mm), body dimensions (0.650" L x 0.220" W), and maximum seated height (0.520") ensure compatibility with the same through-hole PCB layout.

Q: Is there any difference in tolerance specification between CM06FD102GO3 and CD19FD102GO3F?

A: No. Both parts maintain ±2% tolerance on the 1000 pF capacitance value, providing equivalent circuit precision.

Q: Can either part be used in high-voltage applications?

A: Both parts are rated for 500 V operation. Application suitability depends on circuit voltage requirements not exceeding 500 V. Neither part supports voltages above the 500 V rating.