CM05FD361JO3 Mica Capacitor Equivalent & Substitute Parts

Part Overview

The CM05FD361JO3 is a 360 pF mica capacitor rated for 500 V operation in a radial through-hole package. This component is manufactured by Cornell Dubilier Electronics (CDE) and classified as Active product status. The CM05 series represents a general-purpose mica capacitor design suitable for applications requiring stable capacitance and high voltage performance across extended temperature ranges.

Identification of equivalent and substitute parts becomes necessary when the primary part number reaches end-of-life status, inventory constraints occur, or when design requirements permit selection from alternative product series that maintain identical electrical and mechanical specifications.

Substiute Parts

CM05FD361JO3

Cornell Dubilier Electronics (CDE)In Stock: 912CM05FD361JO3 Datasheet

Current PartRFQ

CD15FD361JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1058CD15FD361JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CM05FD361JO3 is permissible when the replacement part maintains all critical electrical and mechanical parameters. The following parameters define substitution eligibility:

Electrical Parameters (Must Match Exactly):

• Capacitance: 360 pF
• Tolerance: ±5%
• Voltage - Rated: 500 V
• Dielectric Material: Mica

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Through Hole
• Package / Case: Radial
• Lead Spacing: 0.232" (5.90mm)
• Size / Dimension: 0.469" L x 0.209" W (11.90mm x 5.30mm)
• Height - Seated (Max): 0.390" (9.90mm)

Environmental Parameters (Must Match Exactly):

• Operating Temperature Range: -55°C to 125°C

The CD15FD361JO3F qualifies as a parametric equivalent because it satisfies all mandatory electrical, mechanical, and environmental criteria. Both parts are manufactured by Cornell Dubilier Electronics and belong to the same product category.

Parameter Comparison

Engineering Selection Recommendations

The CD15FD361JO3F serves as a direct parametric equivalent to the CM05FD361JO3 for applications where electrical and mechanical compatibility are the primary selection criteria. Both parts are Active status products manufactured by Cornell Dubilier Electronics.

Compliance Considerations:

The CD15FD361JO3F provides enhanced regulatory compliance compared to the CM05FD361JO3. The substitute part is ROHS3 compliant and REACH unaffected, whereas the main part is RoHS non-compliant and REACH affected. For applications subject to regulatory requirements mandating RoHS3 compliance or REACH compliance, the CD15FD361JO3F is the appropriate selection.

For applications without regulatory compliance mandates, either part satisfies the electrical and mechanical requirements identically. Selection between the two parts depends on inventory availability, supply chain considerations, and applicable regulatory frameworks for the end application.

Frequently Asked Questions (FAQ)

Q: Can the CD15FD361JO3F be used as a direct replacement for the CM05FD361JO3 in existing designs?

A: Yes. The CD15FD361JO3F maintains identical electrical specifications (360 pF, ±5%, 500 V), dielectric material (mica), operating temperature range (-55°C to 125°C), and mechanical dimensions (radial package, 0.232" lead spacing, 0.469" L x 0.209" W x 0.390" H maximum). Direct substitution is permissible without circuit redesign.

Q: What is the difference in RoHS and REACH compliance between these parts?

A: The CM05FD361JO3 is RoHS non-compliant and REACH affected. The CD15FD361JO3F is ROHS3 compliant and REACH unaffected. Applications subject to RoHS3 or REACH regulatory requirements must use the CD15FD361JO3F.

Q: Are the physical dimensions identical between both parts?

A: Yes. Both parts share identical dimensions: 0.469" length x 0.209" width, with a maximum seated height of 0.390". Lead spacing is 0.232" (5.90mm) for both parts. PCB layout and mechanical clearance requirements are identical.

Q: Do both parts operate across the same temperature range?

A: Yes. Both the CM05FD361JO3 and CD15FD361JO3F operate across the identical temperature range of -55°C to 125°C.

Q: What is the tolerance specification for both parts?

A: Both parts carry a ±5% capacitance tolerance specification, ensuring equivalent accuracy in circuit applications.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in bulk packaging as radial through-hole components suitable for automated and manual assembly processes.