CM00624200 LED Mounting Spacer Equivalent & Substitute Parts

Part Overview

The CM00624200 is a T1/T1 3/4 LED standoff spacer manufactured by Visual Communications Company (VCC). This component provides a 0.200" (5.08mm) mounting height for LED applications using natural nylon material. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical or compatible electrical and mechanical specifications for continued system support and procurement.

Substiute Parts

CM00624200

Visual Communications Company - VCCIn Stock: 881CM00624200 Datasheet

Current PartRFQ

460-200

Bivar Inc.In Stock: 2991460-200 Datasheet

SimilarRFQ

460-190

Bivar Inc.In Stock: 1001460-190 Datasheet

Parametric EquivalentRFQ

460-210

Bivar Inc.In Stock: 1116460-210 Datasheet

Parametric EquivalentRFQ

465-200

Bivar Inc.In Stock: 746465-200 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CM00624200 are classified based on strict parameter matching across three critical dimensions: LED type compatibility, mounting height specification, and material composition. All substitute candidates maintain T1/T1 3/4 LED compatibility and natural nylon construction. Substitution grouping is determined by mounting height tolerance:

Direct Height Match (0.200" / 5.08mm): Parts 460-200 and 465-200 provide exact dimensional equivalence to the original CM00624200 specification.

Parametric Height Variants (0.190" / 4.83mm and 0.210" / 5.33mm): Parts 460-190 and 460-210 represent alternative mounting heights within the T1/T1 3/4 LED standoff category. These parts maintain identical material, color, and compliance specifications but differ in vertical spacing by ±0.010".

All substitute parts are manufactured by Bivar Inc., carry active product status, and maintain ROHS3 compliance and MSL 1 rating identical to the original component.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Exact Dimensional Match):

Parts 460-200 and 465-200 are direct functional equivalents to CM00624200, providing identical 0.200" (5.08mm) mounting height. Both parts carry active product status, ensuring long-term availability and supply chain continuity. Selection between these two options depends on procurement requirements and inventory availability. Part 460-200 offers higher inventory levels (2900 units) compared to 465-200 (685 units).

Secondary Substitutes (Height Variants):

Parts 460-190 and 460-210 provide alternative mounting heights of 0.190" (4.83mm) and 0.210" (5.33mm) respectively. These parts maintain all material, compliance, and LED compatibility specifications. Selection of height variants is appropriate only when circuit board design or LED positioning requirements accommodate the ±0.010" dimensional variance from the original 0.200" specification.

All substitute parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage environments without additional moisture control requirements.

Frequently Asked Questions (FAQ)

Q: Can 460-200 directly replace CM00624200 in existing designs?

A: Yes. Part 460-200 provides identical mounting height (0.200" / 5.08mm), LED type compatibility (T1/T1 3/4), material (nylon), and compliance specifications (ROHS3, MSL 1). The part is manufactured by Bivar Inc. and carries active product status.

Q: What is the difference between 460-200 and 465-200?

A: Both parts provide identical 0.200" (5.08mm) mounting height and LED compatibility. The primary difference is manufacturer series designation (460 versus 465) and inventory availability. Part 460-200 has 2900 units in stock; 465-200 has 685 units. Both are functionally equivalent for the CM00624200 application.

Q: Can I use 460-190 or 460-210 as substitutes?

A: Parts 460-190 and 460-210 are parametric equivalents with alternative mounting heights (0.190" and 0.210" respectively). These parts maintain identical LED compatibility, material, and compliance specifications. Use these alternatives only if circuit board design or LED positioning requirements accommodate the ±0.010" height variance from the original 0.200" specification.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts (460-200, 460-190, 460-210, 465-200) carry ROHS3 compliance certification identical to the original CM00624200.

Q: What is the packaging format for substitute parts?

A: All Bivar Inc. substitute parts are supplied in bag packaging format.

Q: Does the MSL rating affect storage or handling?

A: All parts, including the original CM00624200 and all substitutes, carry MSL 1 (Unlimited) rating. This classification indicates no moisture sensitivity restrictions for storage, handling, or manufacturing processes.