CLVC16373AMDLREP Equivalent & Substitute Parts

Part Overview

The CLVC16373AMDLREP is a D-Type Transparent Latch logic IC manufactured by Texas Instruments, featuring 1 channel with 8:8 circuit configuration and tri-state output capability. This component operates across a supply voltage range of 1.65V to 3.6V and is housed in a 48-SSOP package. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent functional performance can be maintained within the specified electrical and mechanical parameters while accommodating different manufacturer sourcing or inventory availability.

Substiute Parts

CLVC16373AMDLREP

Texas InstrumentsIn Stock: 1440CLVC16373AMDLREP Datasheet

Current PartRFQ

74LVC16373APVG

IDT, Integrated Device Technology IncIn Stock: 453674LVC16373APVG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CLVC16373AMDLREP is determined by the following critical parameters:

Functional Equivalence Requirements:

• Base product number must be 74LVC16373
• Logic type must be D-Type Transparent Latch
• Circuit configuration must be 8:8
• Output type must be Tri-State
• Package / Case must be 48-BSSOP (0.295", 7.50mm Width)
• Mounting type must be Surface Mount

Electrical Compatibility Requirements:

• Supply voltage range must overlap or encompass the operating range of the main part
• Propagation delay time must not exceed specifications for the application
• Output current ratings must meet or exceed 24mA for both high and low states
• Operating temperature range must support the intended application environment

Compliance & Quality Requirements:

• Product status must be Active
• RoHS compliance status must be acceptable for the end application
• Moisture sensitivity level must be compatible with assembly and storage processes

The 74LVC16373APVG qualifies as a substitute based on matching base product number, logic type, circuit configuration, output type, package specification, and mounting type. Electrical parameters remain within acceptable ranges for most applications, with documented differences in supply voltage minimum threshold and propagation delay characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the CLVC16373AMDLREP and 74LVC16373APVG maintain active product status with equivalent functional architecture. Selection between these components should be based on the following documented parameter differences:

Supply Voltage Consideration: The main part operates from 1.65V minimum, while the substitute operates from 2.3V minimum. Applications requiring operation below 2.3V supply voltage must use the CLVC16373AMDLREP.

Propagation Delay Consideration: The main part specifies 1.3ns propagation delay versus 2.1ns for the substitute. Applications with critical timing requirements below 2.1ns must use the CLVC16373AMDLREP.

Operating Temperature Range Consideration: The main part supports -55°C to 125°C operation, while the substitute supports -40°C to 85°C. Applications requiring operation outside the -40°C to 85°C range must use the CLVC16373AMDLREP.

Independent Circuits Consideration: The main part features 1 independent circuit, while the substitute features 2 independent circuits. This difference reflects internal architecture variation within the same base product number designation.

Both components are ROHS3 compliant and carry MSL 1 rating, supporting equivalent assembly and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can the 74LVC16373APVG replace the CLVC16373AMDLREP in all applications?

A: No. The substitute part has a higher minimum supply voltage (2.3V vs 1.65V), longer propagation delay (2.1ns vs 1.3ns), and narrower operating temperature range (-40°C to 85°C vs -55°C to 125°C). Substitution is valid only when the application operates within these more restrictive parameters.

Q: Are the package dimensions identical between these parts?

A: Yes. Both components use the 48-BSSOP package with 0.295" width and 7.50mm height. PCB layout and footprint are identical.

Q: What does the difference in Independent Circuits mean?

A: The main part contains 1 independent latch circuit, while the substitute contains 2 independent latch circuits. Both maintain the same 8:8 circuit configuration and tri-state output specification. This architectural difference does not affect pin compatibility or functional substitution within the specified electrical parameters.

Q: Are both parts RoHS compliant?

A: Yes. Both the CLVC16373AMDLREP and 74LVC16373APVG are ROHS3 compliant and carry MSL 1 moisture sensitivity rating.

Q: Which part should be selected for low-voltage applications?

A: The CLVC16373AMDLREP must be used for applications requiring supply voltages below 2.3V, as the 74LVC16373APVG minimum supply voltage is 2.3V.

Q: Which part should be selected for high-speed timing applications?

A: The CLVC16373AMDLREP must be used for applications requiring propagation delays faster than 2.1ns, as the 74LVC16373APVG specifies 2.1ns propagation delay.