CLT-113-02-L-D-TR Equivalent & Substitute Parts

Part Overview

The CLT-113-02-L-D-TR is a 26-position receptacle connector manufactured by Samtec Inc., designed for board-to-board surface mount applications with 0.079" (2.00mm) pitch spacing. This connector features gold-plated mating contacts, push-pull fastening, and operates across -55°C to 125°C. The part is currently active in production with 969 units in stock.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when procurement lead times require alternative sourcing, or when design flexibility permits component standardization across product lines.

Substiute Parts

CLT-113-02-L-D-TR

Samtec Inc.In Stock: 1033CLT-113-02-L-D-TR Datasheet

Current PartRFQ

CLT-113-02-L-D

Samtec Inc.In Stock: 790CLT-113-02-L-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CLT-113-02-L-D-TR is determined by strict equivalence across the following parameters:

• Connector type (Receptacle)
• Number of positions (26)
• Pitch spacing (0.079" / 2.00mm)
• Number of rows (2)
• Row spacing (0.079" / 2.00mm)
• Mounting type (Surface Mount)
• Contact finish at mating interface (Gold)
• Current rating per contact (4.1A)
• Operating temperature range (-55°C ~ 125°C)
• Flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3)

Parts meeting all these criteria are classified as direct substitutes. Deviations in any parameter disqualify a part from substitution consideration.

Parameter Comparison

Engineering Selection Recommendations

The CLT-113-02-L-D-TR and CLT-113-02-L-D are electrically and mechanically equivalent across all specified parameters. Both parts are ROHS3 compliant, REACH unaffected, and carry identical electrical ratings and environmental specifications.

The primary distinction is product status: CLT-113-02-L-D-TR is currently active in production, while CLT-113-02-L-D is discontinued at DiGi Electronics. For new designs and ongoing production, CLT-113-02-L-D-TR is the recommended selection due to active availability and established supply chain status.

The CLT-113-02-L-D may be considered only when existing inventory is available and supply chain continuity is confirmed through alternative distribution channels.

Frequently Asked Questions (FAQ)

Q: Are CLT-113-02-L-D-TR and CLT-113-02-L-D electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including 4.1A per contact current rating, gold mating contact finish, and operating temperature range of -55°C to 125°C.

Q: Are these connectors mechanically compatible?

A: Yes. Both connectors have identical mechanical specifications: 26 positions, 0.079" (2.00mm) pitch, 2-row configuration, surface mount termination, and push-pull fastening.

Q: What is the difference between these part numbers?

A: The primary difference is packaging and product status. CLT-113-02-L-D-TR includes Tape & Reel (TR) packaging and is currently active. CLT-113-02-L-D is discontinued at DiGi Electronics with unspecified packaging.

Q: Can I use CLT-113-02-L-D as a substitute for CLT-113-02-L-D-TR?

A: Substitution is possible only if CLT-113-02-L-D inventory is available through alternative suppliers and supply continuity is confirmed. For new designs, CLT-113-02-L-D-TR is the appropriate selection.

Q: Do both parts meet RoHS and REACH requirements?

A: Yes. Both CLT-113-02-L-D-TR and CLT-113-02-L-D are ROHS3 compliant and REACH unaffected.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.