CL-SB-23C-11 Equivalent & Substitute Parts

Part Overview

The CL-SB-23C-11 is a slide switch manufactured by Nidec Components Corporation, configured as a DP3T (Double Pole Triple Throw) circuit with non-shorting contact timing. This through-hole, right-angle mounted switch is rated for 200mA DC at 12V and is designed for applications requiring three discrete switching positions. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts may be required due to inventory constraints, regional availability, or specific application requirements where alternative electrical ratings are acceptable.

Substiute Parts

CL-SB-23C-11

Nidec Components CorporationIn Stock: 1119CL-SB-23C-11 Datasheet

Current PartRFQ

JS203011AQN

C&KIn Stock: 2825JS203011AQN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CL-SB-23C-11 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Circuit configuration: DP3T
• Switch function: On-On-On
• Mounting type: Through Hole, Right Angle
• Actuator length: 2.00mm
• Switch travel: 2.00mm
• Contact material: Copper or Copper Alloy
• Contact finish: Silver
• Operating temperature range: -40°C to 85°C minimum
• RoHS compliance: ROHS3 Compliant

Allowable Variation Parameters:

• Current rating: May be equal to or greater than 200mA
• Voltage rating: May be equal to or greater than 12V
• Electrical life: May be equal to or greater than 10,000 cycles
• Contact timing: Non-shorting or unspecified
• Packaging: Bulk or alternative packaging formats

The JS203011AQN qualifies as a substitute part because it maintains all mandatory matching parameters while offering higher current capacity (300mA) and alternative contact material specification (Copper Alloy).

Parameter Comparison

Engineering Selection Recommendations

Both the CL-SB-23C-11 and JS203011AQN are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component deployment.

The CL-SB-23C-11 is the primary selection for applications requiring 12V operation with 200mA current capacity and 10,000 cycle electrical life specification.

The JS203011AQN serves as a functional substitute for applications operating at 6V or lower voltage levels where the higher current capacity (300mA) is beneficial. This substitute is suitable when the application voltage does not exceed 6V DC and the reduced electrical life specification (5,000 cycles) is acceptable for the intended duty cycle.

Selection between these parts must be based on actual circuit voltage requirements and expected operational cycle count. No part should be selected based on assumed compatibility.

Frequently Asked Questions (FAQ)

Q: Can the JS203011AQN replace the CL-SB-23C-11 in a 12V circuit?

A: No. The JS203011AQN is rated for 6V maximum. Using it in a 12V circuit exceeds its voltage specification and will result in component failure.

Q: What is the primary difference between these two parts?

A: The voltage rating differs: CL-SB-23C-11 operates at 12V, while JS203011AQN operates at 6V. Both maintain identical circuit configuration (DP3T), mounting type (through-hole right-angle), and physical dimensions (2.00mm actuator length and travel).

Q: Does the higher current rating of the JS203011AQN (300mA vs 200mA) make it superior?

A: Higher current rating does not indicate superiority. Current rating must match or exceed the application requirement. Selection is determined by actual circuit voltage and current demands, not by specification magnitude.

Q: Are there packaging differences between these parts?

A: Yes. The CL-SB-23C-11 is supplied in Bulk packaging, while the JS203011AQN is supplied in Tube packaging. This affects handling, storage, and assembly processes but does not affect electrical or mechanical function.

Q: What is the significance of the electrical life difference (10,000 vs 5,000 cycles)?

A: Electrical life specifies the number of switching cycles the contact is rated to perform. The CL-SB-23C-11 supports twice the cycle count. For applications with high switching frequency or extended operational life requirements, the CL-SB-23C-11 is the appropriate selection.

Q: Can these parts be used interchangeably in low-voltage applications?

A: Only if the application voltage does not exceed 6V DC and the reduced electrical life of the JS203011AQN (5,000 cycles) is acceptable. The circuit configuration, mounting type, and physical dimensions are identical, but voltage and cycle life specifications must be verified against application requirements.