CLC4011ITP14X Equivalent & Substitute Parts

Part Overview

The CLC4011ITP14X is a voltage feedback amplifier integrated circuit manufactured by MaxLinear, Inc., configured as a 4-circuit operational amplifier in a 14-TSSOP surface mount package. This device is classified as obsolete, with 30,200 units currently in stock. The product operates across a supply voltage range of 2.5 V to 5.5 V and is rated for operating temperatures from -40°C to 85°C.

Due to the obsolete status of the CLC4011ITP14X, identification of equivalent and substitute parts is necessary to ensure design continuity, procurement availability, and long-term product support. Substitute parts must maintain functional compatibility through matching electrical characteristics and identical package specifications.

Substiute Parts

CLC4011ITP14X

MaxLinear, Inc.In Stock: 30216CLC4011ITP14X Datasheet

Current PartRFQ

BA3474FVJ-E2

Rohm SemiconductorIn Stock: 1014BA3474FVJ-E2 Datasheet

MFR RecommendedRFQ

MAX4418EUD+

Analog Devices Inc./Maxim IntegratedIn Stock: 1102MAX4418EUD+ Datasheet

MFR RecommendedRFQ

MCP6004T-E/ST

Microchip TechnologyIn Stock: 35121MCP6004T-E/ST Datasheet

MFR RecommendedRFQ

MCP6004T-I/ST

Microchip TechnologyIn Stock: 18824MCP6004T-I/ST Datasheet

MFR RecommendedRFQ

TLV2774CPWR

Texas InstrumentsIn Stock: 2095TLV2774CPWR Datasheet

MFR RecommendedRFQ

TLV2774IPWR

Texas InstrumentsIn Stock: 3178TLV2774IPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CLC4011ITP14X are selected based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Number of Circuits: 4 (all substitutes must provide 4 independent amplifier circuits)
• Package / Case: 14-TSSOP with 0.173" width and 4.40mm width specification (identical footprint required for PCB compatibility)
• Mounting Type: Surface Mount (consistent with original design)
• Voltage - Supply Span: Minimum 2.5 V to Maximum 5.5 V (operating range must encompass or match the original specification)
• Operating Temperature: -40°C to 85°C minimum (temperature range must support the original operating conditions)
• Moisture Sensitivity Level: MSL 1 (Unlimited) preferred for handling consistency

Secondary Performance Parameters:

• Output Type: Rail-to-Rail (preferred for signal swing capability)
• Slew Rate: Minimum 9 V/µs (performance threshold for signal fidelity)
• Gain Bandwidth Product: Minimum 2.5 MHz (frequency response requirement)

Substitutes are grouped into two categories: Direct Voltage Feedback Replacements (matching amplifier topology) and General Purpose / CMOS Alternatives (functionally compatible with different topologies).

Parameter Comparison

Engineering Selection Recommendations

MAX4418EUD+ (Primary Direct Replacement)

The MAX4418EUD+ is the optimal substitute for the CLC4011ITP14X. Both devices are voltage feedback amplifiers with identical package specifications (14-TSSOP), matching output type (Rail-to-Rail), and overlapping supply voltage range (2.5 V to 5.5 V). The MAX4418EUD+ maintains the same operating temperature minimum of -40°C and is rated to 85°C, meeting the original specification. The device is manufactured by Analog Devices Inc./Maxim Integrated and holds Active product status with ROHS3 compliance. Current inventory of 1,015 units supports immediate procurement. The MAX4418EUD+ exceeds the original slew rate specification (200 V/µs versus 9 V/µs) and provides superior -3dB bandwidth (400 MHz), ensuring enhanced performance in signal conditioning applications.

TLV2774IPWR (Extended Temperature Alternative)

The TLV2774IPWR is a CMOS amplifier manufactured by Texas Instruments, configured as a 4-circuit device in the identical 14-TSSOP package. This substitute maintains Rail-to-Rail output capability and operates within the required supply voltage range (2.5 V to 5.5 V). The TLV2774IPWR extends the operating temperature range to -40°C to 125°C, providing superior thermal performance compared to the original specification. Product status is Active with ROHS3 compliance. Current inventory of 3,133 units is available. The slew rate of 10.5 V/µs and gain bandwidth product of 5.1 MHz exceed the original device specifications.

MCP6004T-I/ST (Low-Power General Purpose Alternative)

The MCP6004T-I/ST is a general purpose amplifier manufactured by Microchip Technology, providing 4 circuits in the 14-TSSOP package with Rail-to-Rail output. This device operates across an extended supply voltage range (1.8 V to 6 V) and maintains the required operating temperature specification (-40°C to 85°C). Product status is Active with ROHS3 compliance. Current inventory of 18,800 units supports high-volume procurement. The MCP6004T-I/ST is characterized by exceptionally low input bias current (1 pA) and minimal supply current consumption (100 µA for 4 channels), making it suitable for low-power applications where the original device's higher supply current (136 µA) is a constraint.

BA3474FVJ-E2 (General Purpose Alternative with Extended Supply Range)

The BA3474FVJ-E2 is a general purpose amplifier manufactured by Rohm Semiconductor, configured as a 4-circuit device in the 14-TSSOP package. This substitute maintains the required operating temperature range (-40°C to 85°C) and provides a significantly extended supply voltage range (3 V to 36 V), enabling use in higher-voltage applications. Product status is Active with ROHS3 compliance. Current inventory of 958 units is available. The slew rate of 10 V/µs and gain bandwidth product of 4 MHz exceed the original specifications.

TLV2774CPWR (Commercial Temperature Range Alternative)

The TLV2774CPWR is a CMOS amplifier manufactured by Texas Instruments, identical to the TLV2774IPWR except for a restricted operating temperature range (0°C to 70°C). This device is suitable only for applications where the full -40°C to 85°C temperature range is not required. Product status is Active with ROHS3 compliance. Current inventory of 2,050 units is available.

MCP6004T-E/ST (Extended Temperature General Purpose Alternative)

The MCP6004T-E/ST is a general purpose amplifier manufactured by Microchip Technology, functionally identical to the MCP6004T-I/ST but rated for an extended operating temperature range (-40°C to 125°C). This device provides 4 circuits in the 14-TSSOP package with Rail-to-Rail output and operates across a supply voltage range of 1.8 V to 6 V. Product status is Active with ROHS3 compliance. Current inventory of 35,100 units is the highest among all substitutes, supporting large-scale procurement requirements.

Frequently Asked Questions (FAQ)

Q1: Can the MAX4418EUD+ be used as a direct pin-for-pin replacement for the CLC4011ITP14X?

A: Yes. Both devices are configured as 4-circuit operational amplifiers in the identical 14-TSSOP package with 0.173" width and 4.40mm width specification. Pin assignments are compatible for direct PCB substitution. Both devices feature Rail-to-Rail output and operate within the same supply voltage range (2.5 V to 5.5 V). Electrical characteristics are compatible for standard signal conditioning applications.

Q2: What is the primary difference between the voltage feedback amplifiers (CLC4011ITP14X, MAX4418EUD+) and the general purpose alternatives (BA3474FVJ-E2, MCP6004T-E/ST, MCP6004T-I/ST)?

A: Voltage feedback amplifiers are optimized for high-speed, high-bandwidth applications with superior slew rate performance. General purpose amplifiers provide broader functionality across a wider range of applications with lower power consumption. The CLC4011ITP14X and MAX4418EUD+ are both voltage feedback topologies. The general purpose alternatives (BA3474FVJ-E2, MCP6004 series) offer lower input bias current and reduced supply current, making them suitable for low-power designs where the original voltage feedback topology is not a critical requirement.

Q3: Are all substitute parts available in the same packaging format?

A: Yes. All substitute parts listed are configured in the 14-TSSOP surface mount package with identical physical dimensions (0.173" width, 4.40mm width). This ensures direct PCB footprint compatibility without layout modifications. All devices feature MSL 1 (Unlimited) moisture sensitivity rating, matching the original specification.

Q4: Which substitute part offers the lowest power consumption?

A: The MCP6004T-E/ST and MCP6004T-I/ST both provide the lowest supply current consumption at 100 µA for 4 channels, compared to the original CLC4011ITP14X specification of 136 µA. These devices are suitable for battery-powered and low-power applications where reduced supply current is a design requirement.

Q5: What is the operating temperature range limitation for the TLV2774CPWR?

A: The TLV2774CPWR is rated for 0°C to 70°C operating temperature, which does not encompass the full -40°C to 85°C range of the original CLC4011ITP14X. This device is suitable only for applications operating within the commercial temperature range (0°C to 70°C). For applications requiring the full -40°C to 85°C range, use the TLV2774IPWR instead.

Q6: Can the BA3474FVJ-E2 be used in applications requiring supply voltages above 5.5 V?

A: Yes. The BA3474FVJ-E2 supports supply voltages up to 36 V, compared to the original CLC4011ITP14X maximum of 5.5 V. This extended supply range enables use in higher-voltage applications. However, the minimum supply voltage is 3 V, which is higher than the original 2.5 V specification. Verify that your application's minimum supply voltage meets or exceeds 3 V before selecting this substitute.

Q7: Which substitute part provides the highest output current per channel?

A: The MAX4418EUD+ provides the highest output current per channel at 75 mA, compared to the original CLC4011ITP14X specification of 35 mA. This enhanced output drive capability is suitable for applications requiring higher load currents or lower output impedance.

Q8: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (BA3474FVJ-E2, MAX4418EUD+, MCP6004T-E/ST, MCP6004T-I/ST, TLV2774CPWR, TLV2774IPWR) are certified as ROHS3 compliant. The original CLC4011ITP14X does not specify RoHS compliance status. All substitutes meet current environmental and regulatory requirements for electronic component manufacturing and use.

Q9: What is the inventory status for each substitute part?

A: Current inventory levels are as follows: MCP6004T-E/ST (35,100 units), CLC4011ITP14X original (30,200 units), MCP6004T-I/ST (18,800 units), TLV2774IPWR (3,133 units), TLV2774CPWR (2,050 units), BA3474FVJ-E2 (958 units), MAX4418EUD+ (1,015 units). The MCP6004T-E/ST offers the highest availability for large-volume procurement.

Q10: Can the MCP6004 series be used in high-frequency applications?

A: The MCP6004T-E/ST and MCP6004T-I/ST are general purpose amplifiers with a gain bandwidth product of 1 MHz and slew rate of 0.6 V/µs. These specifications are lower than the original CLC4011ITP14X (2.5 MHz gain bandwidth product, 9 V/µs slew rate). The MCP6004 series is suitable for low-frequency and audio applications but is not recommended for high-frequency signal conditioning applications where the original voltage feedback topology provides superior performance.