CLC2010ISO8 Equivalent & Substitute Parts

Part Overview

The CLC2010ISO8 is a voltage feedback amplifier integrated circuit manufactured by MaxLinear, Inc., configured as a dual-channel (2 circuit) rail-to-rail operational amplifier in an 8-SOIC surface mount package. This device is classified as obsolete, indicating it is no longer in active production. Due to its obsolete status, equivalent substitute parts from active product lines are necessary for new designs, production continuity, and long-term component availability. The substitute parts listed maintain functional compatibility through equivalent packaging, pin configuration, and core amplifier topology while offering enhanced electrical performance characteristics.

Substiute Parts

CLC2010ISO8

MaxLinear, Inc.In Stock: 22672CLC2010ISO8 Datasheet

Current PartRFQ

MAX4416ESA+T

Analog Devices Inc./Maxim IntegratedIn Stock: 672MAX4416ESA+T Datasheet

MFR RecommendedRFQ

MAX4417ESA+

Analog Devices Inc./Maxim IntegratedIn Stock: 1407MAX4417ESA+ Datasheet

MFR RecommendedRFQ

MAX4417ESA+T

Analog Devices Inc./Maxim IntegratedIn Stock: 805MAX4417ESA+T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CLC2010ISO8 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Compatibility Criteria:

• Amplifier topology: Voltage feedback configuration
• Circuit count: Dual-channel (2 circuits)
• Output configuration: Rail-to-rail operation
• Package type: 8-SOIC surface mount
• Package dimensions: 0.154" width (3.90mm)
• Supply voltage range: Minimum 2.5V, maximum 5.5V
• Operating temperature range: -40°C to 85°C
• Moisture sensitivity: MSL 1 (Unlimited)

All substitute parts (MAX4416ESA+T, MAX4417ESA+, MAX4417ESA+T) meet these criteria. The substitute parts are manufactured by Analog Devices Inc./Maxim Integrated and maintain active product status, ensuring long-term availability and support. Electrical performance enhancements in the substitute parts (higher slew rate, increased bandwidth, improved input bias current, and higher output current capability) are compatible with applications designed for the CLC2010ISO8, as these represent improvements that do not compromise backward compatibility.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The CLC2010ISO8 is classified as obsolete. All three substitute parts (MAX4416ESA+T, MAX4417ESA+, MAX4417ESA+T) maintain active product status from Analog Devices Inc./Maxim Integrated, ensuring continued availability, technical support, and manufacturing continuity.

Compliance and Certification: All substitute parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements. The CLC2010ISO8 does not specify these compliance statuses, making the substitute parts preferable for applications subject to modern regulatory frameworks.

Packaging and Availability:

• MAX4416ESA+T: Supplied in Tape & Reel (TR) format, suitable for automated assembly processes
• MAX4417ESA+: Supplied in Tube format, suitable for manual assembly or lower-volume applications
• MAX4417ESA+T: Packaging not specified; available in active inventory

Selection between substitute parts should be based on procurement requirements and assembly methodology rather than electrical performance, as all three parts satisfy the core compatibility criteria.

Frequently Asked Questions (FAQ)

Q: Can the MAX4416ESA+T, MAX4417ESA+, or MAX4417ESA+T be used as direct replacements for the CLC2010ISO8?

A: Yes. All three substitute parts are pin-compatible and functionally equivalent within the specified electrical and mechanical parameters. They share identical package geometry (8-SOIC, 0.154" width), dual-channel rail-to-rail configuration, and compatible supply voltage ranges (-40°C to 85°C operating temperature). No circuit modifications are required for substitution.

Q: What are the key differences between the substitute parts?

A: The primary differences are packaging format and electrical performance characteristics. MAX4416ESA+T offers the highest slew rate (200V/µs) and bandwidth (400 MHz). MAX4417ESA+ and MAX4417ESA+T offer identical electrical specifications (470V/µs slew rate, 150 MHz bandwidth) but differ in packaging: MAX4417ESA+ is supplied in Tube format, while MAX4417ESA+T packaging is not specified. All three maintain compatibility with the CLC2010ISO8 application requirements.

Q: Are there any supply voltage compatibility issues?

A: The CLC2010ISO8 specifies a minimum supply voltage of 2.5V, while all substitute parts specify 2.7V minimum. This represents a marginal difference. Applications operating at exactly 2.5V to 2.6V may require verification, though the substitute parts are designed to operate reliably at 2.7V and above within the 5.5V maximum specification shared by all parts.

Q: What is the significance of the MSL 1 (Unlimited) rating?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and does not require special moisture control during storage or handling. All parts, including the CLC2010ISO8 and its substitutes, share this rating, eliminating moisture sensitivity as a selection criterion.

Q: Which substitute part should be selected for new production designs?

A: Selection should be based on assembly methodology and procurement logistics. For automated surface mount assembly, MAX4416ESA+T (Tape & Reel format) is standard. For manual assembly or lower-volume production, MAX4417ESA+ (Tube format) is appropriate. Both maintain active product status and full regulatory compliance. Electrical performance differences (slew rate and bandwidth) should be evaluated against specific application requirements.

Q: Is the CLC2010ISO8 still available for purchase?

A: The CLC2010ISO8 is classified as obsolete and is no longer in active production. While legacy inventory may exist (22,562 pieces noted as in stock), long-term availability is not guaranteed. Transition to active substitute parts is recommended for design continuity and supply chain reliability.