CLC2009ISO8 Equivalent & Substitute Parts

Part Overview

The CLC2009ISO8 is a general purpose operational amplifier featuring dual circuits in an 8-SOIC surface mount package, manufactured by MaxLinear, Inc. This device is designed for applications requiring low-power amplification with moderate bandwidth performance. The product status is obsolete, necessitating identification of functionally compatible alternatives for ongoing design support and component procurement.

Substiute Parts

CLC2009ISO8

MaxLinear, Inc.In Stock: 4820CLC2009ISO8 Datasheet

Current PartRFQ

LM6152BCM/NOPB

Texas InstrumentsIn Stock: 100137LM6152BCM/NOPB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CLC2009ISO8 is based on the following critical parameters that must align between the main part and substitute candidates:

Package Compatibility: Both devices must use the 8-SOIC surface mount package to ensure direct PCB footprint compatibility without layout modifications.

Circuit Configuration: Dual-circuit (2-channel) operational amplifier topology is required to maintain functional equivalence in applications designed for the CLC2009ISO8.

Supply Voltage Range: The substitute must operate within or encompass the 2.5 V to 5.5 V supply range of the original part to ensure compatibility with existing power distribution designs.

Mounting Technology: Surface mount technology is mandatory for compatibility with modern PCB assembly processes.

Electrical Performance Envelope: The substitute must meet or exceed the slew rate (27 V/µs minimum) and gain bandwidth product (20 MHz minimum) to support the intended signal processing requirements.

The LM6152BCM/NOPB from Texas Instruments satisfies all substitution criteria and is classified as the manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

The LM6152BCM/NOPB is the designated manufacturer-recommended substitute for the obsolete CLC2009ISO8. Selection of this alternative is supported by the following engineering factors:

Product Availability: The LM6152BCM/NOPB maintains active production status with substantial inventory availability (100,100 pieces), ensuring reliable long-term procurement compared to the obsolete CLC2009ISO8.

Package Compatibility: Both devices utilize identical 8-SOIC surface mount packaging, enabling direct PCB footprint compatibility without design modifications.

Regulatory Compliance: The LM6152BCM/NOPB is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for component procurement and end-product distribution.

Performance Enhancement: The substitute device exceeds the original specification across multiple parameters including slew rate (30 V/µs vs. 27 V/µs), gain bandwidth product (80 MHz vs. 20 MHz), input offset voltage (300 µV vs. 1.5 mV), and output current capability (16.9 mA vs. 8.5 mA per channel).

Supply Voltage Consideration: The substitute minimum supply voltage is 2.7 V compared to 2.5 V for the original part. Applications operating at supply voltages below 2.7 V require circuit verification. The substitute maximum supply voltage of 24 V provides extended operating range beyond the original 5.5 V specification.

Operating Temperature Range: The substitute operating temperature range (0°C to 70°C) is narrower than the original (-40°C to 85°C). Applications requiring extended temperature operation below 0°C or above 70°C must evaluate alternative solutions.

Frequently Asked Questions (FAQ)

Q: Can the LM6152BCM/NOPB be used as a direct replacement for the CLC2009ISO8 without PCB modifications?

A: Yes. Both devices use the 8-SOIC surface mount package with identical pin spacing and footprint dimensions (0.154" width, 3.90mm). Direct PCB footprint compatibility is confirmed. However, circuit verification is required for applications operating at supply voltages below 2.7 V or outside the 0°C to 70°C temperature range.

Q: What are the key electrical differences between these devices?

A: The LM6152BCM/NOPB provides superior performance across multiple parameters: slew rate is 30 V/µs (vs. 27 V/µs), gain bandwidth product is 80 MHz (vs. 20 MHz), input offset voltage is 300 µV (vs. 1.5 mV), and output current per channel is 16.9 mA (vs. 8.5 mA). Supply current per channel is higher at 0.8 mA compared to 185 µA for the original part.

Q: Are there supply voltage compatibility concerns?

A: The substitute minimum supply voltage is 2.7 V versus 2.5 V for the original. Applications operating at 2.5 V to 2.7 V must be verified with the substitute device. The substitute maximum supply voltage of 24 V exceeds the original 5.5 V specification, providing extended operating range for higher-voltage applications.

Q: Does the LM6152BCM/NOPB meet environmental and regulatory requirements?

A: Yes. The LM6152BCM/NOPB is ROHS3 compliant and REACH unaffected, meeting current environmental regulations for component procurement and end-product distribution in regulated markets.

Q: What is the operating temperature range difference?

A: The CLC2009ISO8 operates from -40°C to 85°C, while the LM6152BCM/NOPB operates from 0°C to 70°C. Applications requiring operation below 0°C or above 70°C must evaluate alternative solutions or implement thermal management strategies.

Q: Is the substitute available in the same packaging format?

A: Yes. The LM6152BCM/NOPB is supplied in Tube packaging in the 8-SOIC configuration, matching the surface mount package type of the original device.