CLC2007ISO8MTR Equivalent & Substitute Parts

Part Overview

The CLC2007ISO8MTR is a voltage feedback amplifier integrated circuit manufactured by MaxLinear, Inc., featuring dual circuits in an 8-SOIC surface mount package. This device is classified as obsolete, indicating discontinued production and limited availability. The part delivers rail-to-rail output capability with a slew rate of 225V/µs and gain bandwidth product of 260 MHz, suitable for general-purpose analog signal conditioning applications.

Due to obsolete product status, substitute components are necessary to maintain design continuity and ensure long-term supply chain reliability. Equivalent parts must maintain functional compatibility across critical electrical parameters including package type, circuit count, output configuration, and operating voltage range.

Key Parameters

Parameter	CLC2007ISO8MTR	Unit
Amplifier Type	Voltage Feedback	—
Number of Circuits	2	Circuits
Output Type	Rail-to-Rail	—
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Slew Rate	225	V/µs
Gain Bandwidth Product	260	MHz
-3dB Bandwidth	90	MHz
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	12.6	V
Operating Temperature	-40 to 85	°C
Mounting Type	Surface Mount	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitution eligibility for the CLC2007ISO8MTR is determined by strict adherence to the following mandatory parameters:

Primary Compatibility Criteria:

Package type: 8-SOIC (0.154", 3.90mm Width) surface mount
Circuit count: 2 independent amplifier circuits
Output configuration: Rail-to-rail output
Amplifier topology: Voltage feedback architecture

Secondary Compatibility Parameters:

Supply voltage range overlap with original specification (2.7V minimum, 12.6V maximum)
Operating temperature range: minimum -40°C, maximum ≥85°C
Pin-compatible 8-SOIC footprint

All identified substitute parts meet these primary and secondary criteria. Variations in slew rate, gain bandwidth product, input bias current, and output current capacity are acceptable provided the substitute part operates within the specified supply voltage and temperature ranges and maintains identical package and circuit configuration.

Parameter Comparison

Parameter	CLC2007ISO8MTR	ADA4891-2ARZ	LMH6619MAE/NOPB	LMH6619QMAKE/NOPB	LMH6643MAX/NOPB	MAX4016ESA+T	MAX4451ESA+T	OPA2832ID	Unit
Amplifier Type	Voltage Feedback	CMOS	Voltage Feedback	Voltage Feedback	Voltage Feedback	Voltage Feedback	Voltage Feedback	Voltage Feedback	—
Number of Circuits	2	2	2	2	2	2	2	2	Circuits
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	—
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	—
Slew Rate	225	210	57	57	135	600	485	300	V/µs
Gain Bandwidth Product	260	105	58	140	—	—	175	—	MHz
-3dB Bandwidth	90	90	140	140	130	150	210	250	MHz
Voltage - Supply Span (Min)	2.7	2.7	2.7	2.7	2.7	3.15	4.5	2.8	V
Voltage - Supply Span (Max)	12.6	5.5	11	11	12.8	11	11	11	V
Operating Temperature (Min)	-40	-40	-40	-40	-40	-40	-40	—	°C
Operating Temperature (Max)	85	125	125	125	85	85	85	—	°C
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	—
RoHS Status	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	—

Engineering Selection Recommendations

Primary Recommendation: LMH6643MAX/NOPB

The LMH6643MAX/NOPB from Texas Instruments is the preferred substitute for the obsolete CLC2007ISO8MTR. This part maintains identical package configuration (8-SOIC), dual-circuit architecture, and rail-to-rail output topology. The supply voltage range (2.7V to 12.8V) encompasses the original specification, and the operating temperature range (-40°C to 85°C) matches the CLC2007ISO8MTR exactly. The device is active in production with ROHS3 compliance and unlimited moisture sensitivity rating, ensuring long-term availability and regulatory compliance. Inventory availability of 30,300 units provides supply security.

Secondary Recommendation: LMH6619QMAKE/NOPB

The LMH6619QMAKE/NOPB from Texas Instruments offers automotive-grade qualification (AEC-Q100) with active product status. This part is suitable for applications requiring automotive reliability standards. The supply voltage range (2.7V to 11V) is compatible with the original specification, and the extended operating temperature range (-40°C to 125°C) exceeds the original requirement. ROHS3 compliance and unlimited moisture sensitivity rating are provided.

Alternative Recommendation: MAX4451ESA+T

The MAX4451ESA+T from Analog Devices Inc./Maxim Integrated provides the highest slew rate (485V/µs) and bandwidth performance (-3dB bandwidth 210 MHz) among available substitutes. This part is suitable for high-speed signal conditioning applications. The supply voltage range (4.5V to 11V) requires verification against the original design's minimum voltage requirement of 2.7V. Active product status and ROHS3 compliance are confirmed.

Compatibility Note: ADA4891-2ARZ

The ADA4891-2ARZ from Analog Devices Inc. features CMOS amplifier topology with exceptionally low input bias current (2 pA). However, the maximum supply voltage (5.5V) is significantly lower than the original specification (12.6V maximum). This part is suitable only for applications operating within the 2.7V to 5.5V supply range.

Frequently Asked Questions (FAQ)

Q1: Can the ADA4891-2ARZ substitute for the CLC2007ISO8MTR in all applications?

The ADA4891-2ARZ is pin-compatible and maintains the same package and circuit configuration. However, the maximum supply voltage is limited to 5.5V compared to the original 12.6V maximum. Substitution is valid only for designs operating within the 2.7V to 5.5V supply range. Applications requiring higher supply voltages must use alternative substitutes.

Q2: What is the primary difference between the LMH6619MAE/NOPB and LMH6619QMAKE/NOPB?

Both parts share identical electrical specifications and package configuration. The LMH6619QMAKE/NOPB includes automotive-grade qualification (AEC-Q100) and is supplied in Tape & Reel packaging, while the LMH6619MAE/NOPB is supplied in Cut Tape & Digi-Reel format. Selection depends on packaging requirements and automotive qualification necessity.

Q3: Is the OPA2832ID suitable as a substitute?

The OPA2832ID maintains the 8-SOIC package and dual-circuit configuration with rail-to-rail output. The -3dB bandwidth (250 MHz) and slew rate (300V/µs) exceed the original specification. However, the supply voltage specification is listed as 2.8V to 11V (single supply) or ±1.4V to ±5.5V (dual supply). Verification of single-supply operation at the original design's maximum voltage (12.6V) is required before selection.

Q4: Why is supply voltage range compatibility critical for substitution?

The CLC2007ISO8MTR operates across a 2.7V to 12.6V supply range. Substitute parts with lower maximum supply voltages (such as ADA4891-2ARZ at 5.5V maximum) cannot be used in designs requiring the full original voltage range. Exceeding a part's maximum supply voltage causes device damage and circuit failure.

Q5: Are all substitute parts RoHS3 compliant?

All identified substitute parts carry ROHS3 compliance certification. The original CLC2007ISO8MTR RoHS status is not specified in the provided data. Designs requiring RoHS compliance should confirm the original design's regulatory requirements before substitution.

Q6: What is the significance of moisture sensitivity level (MSL) ratings?

The CLC2007ISO8MTR carries MSL 2 (1 Year), indicating moisture sensitivity with a one-year floor life after packaging opening. All substitute parts carry MSL 1 (Unlimited), indicating superior moisture resistance and indefinite shelf life after opening. This represents an improvement in handling and storage requirements.

Q7: Can the MAX4451ESA+T be used in designs with 2.7V minimum supply voltage?

The MAX4451ESA+T specifies a minimum supply voltage of 4.5V, which exceeds the original 2.7V minimum. This part is not suitable for designs requiring operation at the original minimum supply voltage of 2.7V. Designs operating at 4.5V or higher may use this substitute.

Q8: What packaging formats are available for substitute parts?

Substitute parts are available in multiple packaging formats: Cut Tape (CT) & Digi-Reel, Tape & Reel (TR), and Tube. Selection depends on manufacturing assembly requirements and volume. All formats maintain identical 8-SOIC footprint compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message