CLC2005ISO8MTR Equivalent & Substitute Parts Reference

Part Overview

The CLC2005ISO8MTR is a voltage feedback amplifier IC manufactured by MaxLinear, Inc., featuring dual circuits in an 8-SOIC surface mount package. This device is designed for rail-to-rail output applications with a gain bandwidth product of 90 MHz and slew rate of 145 V/µs. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and production continuity. Substitute parts must maintain compatibility across electrical performance parameters, package form factor, and thermal operating ranges to ensure direct replacement capability.

Substiute Parts

CLC2005ISO8MTR

MaxLinear, Inc.In Stock: 1736CLC2005ISO8MTR Datasheet

Current PartRFQ

ISL28291FBZ-T7

Renesas Electronics CorporationIn Stock: 1239ISL28291FBZ-T7 Datasheet

MFR RecommendedRFQ

MAX4416ESA+

Analog Devices Inc./Maxim IntegratedIn Stock: 995MAX4416ESA+ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CLC2005ISO8MTR is determined by strict adherence to the following critical parameters:

Mandatory Compatibility Criteria:

• Amplifier topology: Voltage Feedback (required)
• Circuit count: 2 circuits (required)
• Output configuration: Rail-to-Rail (required)
• Package form factor: 8-SOIC with 0.154" (3.90mm) width (required)
• Mounting technology: Surface Mount (required)
• Moisture Sensitivity Level: MSL 1 or equivalent (required)

Electrical Performance Parameters for Substitution Assessment:

• Slew Rate: Minimum 145 V/µs (substitute must meet or exceed)
• Gain Bandwidth Product: Minimum 90 MHz (substitute must meet or exceed)
• -3dB Bandwidth: Minimum 260 MHz (substitute must meet or exceed)
• Input Bias Current: Maximum 3 µA (substitute must not exceed)
• Input Offset Voltage: Maximum 1.6 mV (substitute must not exceed)
• Supply Current (x2 Channels): Maximum 4.2 mA (substitute must not exceed)
• Output Current per Channel: Minimum 55 mA (substitute must meet or exceed)
• Supply Voltage Range: Minimum 2.5 V to 5.5 V (substitute range must encompass or exceed)
• Operating Temperature: -40°C to 85°C minimum (substitute must support or exceed)

The two substitute parts identified below satisfy these mandatory criteria and are therefore qualified as direct replacements for the obsolete CLC2005ISO8MTR.

Parameter Comparison

Engineering Selection Recommendations

ISL28291FBZ-T7 (Renesas Electronics Corporation)

The ISL28291FBZ-T7 is an active product with ROHS3 compliance and REACH unaffected status. This part maintains identical package geometry and circuit configuration to the CLC2005ISO8MTR. The ISL28291FBZ-T7 demonstrates superior input offset voltage (0.27 mV vs. 1.6 mV) and reduced supply current consumption (2.6 mA vs. 4.2 mA). Output current capability is increased to 130 mA per channel. Operating temperature range extends to 125°C, providing enhanced thermal margin. The -3dB bandwidth of 61 MHz is below the original specification of 260 MHz; however, slew rate of 17 V/µs falls below the 145 V/µs requirement. Selection of this part requires verification that application bandwidth and slew rate demands do not exceed the specified performance envelope.

MAX4416ESA+ (Analog Devices Inc./Maxim Integrated)

The MAX4416ESA+ is an active product with ROHS3 compliance and REACH unaffected status. This part provides the highest performance profile among available substitutes, with slew rate of 200 V/µs (exceeding the original 145 V/µs) and -3dB bandwidth of 400 MHz (exceeding the original 260 MHz). Input bias current is reduced to 1.3 µA, and input offset voltage is 0.5 mV. Supply current consumption is minimized at 1.6 mA, while output current per channel reaches 75 mA. Operating temperature range matches the original specification at -40°C to 85°C. The MAX4416ESA+ is packaged in Tube format. This part is suitable for applications requiring performance enhancement over the original CLC2005ISO8MTR specification.

Both substitute parts are available in active production status, ensuring long-term supply continuity and technical support availability.

Frequently Asked Questions (FAQ)

Q: Can the ISL28291FBZ-T7 be used as a direct replacement for the CLC2005ISO8MTR in all applications?

A: The ISL28291FBZ-T7 maintains identical package geometry and dual-circuit rail-to-rail configuration. However, the -3dB bandwidth of 61 MHz and slew rate of 17 V/µs are below the original CLC2005ISO8MTR specifications of 260 MHz and 145 V/µs respectively. Direct substitution is valid only for applications where bandwidth and slew rate requirements do not exceed the ISL28291FBZ-T7 performance envelope.

Q: What are the key differences between the ISL28291FBZ-T7 and MAX4416ESA+ substitutes?

A: The MAX4416ESA+ provides superior high-frequency performance with 400 MHz bandwidth and 200 V/µs slew rate, compared to the ISL28291FBZ-T7 at 61 MHz and 17 V/µs. The MAX4416ESA+ also offers lower supply current (1.6 mA vs. 2.6 mA) and lower input offset voltage (0.5 mV vs. 0.27 mV). The ISL28291FBZ-T7 provides extended operating temperature to 125°C. Selection depends on specific application bandwidth, slew rate, and thermal requirements.

Q: Are both substitute parts available in the same packaging format as the original CLC2005ISO8MTR?

A: Both substitute parts use the 8-SOIC package with identical 0.154" (3.90mm) width, ensuring PCB layout compatibility. The ISL28291FBZ-T7 is supplied in Tape & Reel format, while the MAX4416ESA+ is supplied in Tube format. Both are surface mount devices with MSL 1 moisture sensitivity rating.

Q: What compliance certifications apply to the substitute parts?

A: Both ISL28291FBZ-T7 and MAX4416ESA+ are ROHS3 compliant and REACH unaffected. Both carry MSL 1 (Unlimited) moisture sensitivity classification. The ISL28291FBZ-T7 is classified under ECCN EAR99, and the MAX4416ESA+ is also classified under ECCN EAR99.

Q: Can the CLC2005ISO8MTR be replaced with either substitute in existing production designs?

A: Both substitute parts are pin-compatible and functionally equivalent within their specified performance parameters. Design validation should confirm that application requirements fall within the electrical performance envelope of the selected substitute. The MAX4416ESA+ is recommended for applications requiring performance matching or exceeding the original CLC2005ISO8MTR. The ISL28291FBZ-T7 is suitable for lower-bandwidth applications with extended temperature requirements.

Q: What is the supply voltage compatibility between the original and substitute parts?

A: The CLC2005ISO8MTR operates from 2.5 V to 5.5 V. The ISL28291FBZ-T7 requires minimum 3.0 V, and the MAX4416ESA+ operates from 2.7 V minimum. For applications using supply voltages between 2.5 V and 3.0 V, only the CLC2005ISO8MTR or MAX4416ESA+ are compatible. The ISL28291FBZ-T7 is not suitable for such low-voltage applications.