CLC1015IST6 Equivalent & Substitute Parts

Part Overview

The CLC1015IST6 is a voltage feedback amplifier integrated circuit manufactured by MaxLinear, Inc., designed for single-circuit rail-to-rail applications in a 6-TSOT surface mount package. This device is classified as obsolete, indicating it is no longer in active production. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing system maintenance and new production requirements.

Substiute Parts

CLC1015IST6

MaxLinear, Inc.In Stock: 963CLC1015IST6 Datasheet

Current PartRFQ

LT1815IS6#TRPBF

Analog Devices Inc.In Stock: 2264LT1815IS6#TRPBF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CLC1015IST6 is determined by the following critical parameters:

Package Compatibility: The substitute part must use the TSOT-23-6 (6-TSOT) surface mount package to ensure direct PCB footprint compatibility without layout modifications.

Amplifier Architecture: The substitute must be a voltage feedback amplifier with a single circuit configuration to maintain functional equivalence in signal processing applications.

Supply Voltage Range: The substitute must operate within or encompass the original 2.5 V to 5.5 V supply span. Extended supply voltage capability does not preclude substitution.

Output Configuration: Rail-to-rail output capability is a defining characteristic of the CLC1015IST6. Substitute parts must support this output type.

Temperature Range: The substitute must support the -40°C to 85°C operating temperature range.

Mounting Technology: Surface mount technology must be maintained for manufacturing process compatibility.

The LT1815IS6#TRPBF from Analog Devices Inc. satisfies all substitution criteria based on these parameters.

Parameter Comparison

Engineering Selection Recommendations

The LT1815IS6#TRPBF is the qualified substitute for the CLC1015IST6 based on the following engineering criteria:

Package and Footprint: Both devices use the TSOT-23-6 package, enabling direct replacement without PCB redesign or layout modifications.

Functional Equivalence: Both are single-circuit voltage feedback amplifiers with identical amplifier architecture and circuit count, ensuring functional compatibility in existing designs.

Supply Voltage Compatibility: The LT1815IS6#TRPBF operates across a 2.5 V to 11 V supply range, which encompasses the CLC1015IST6 operating range of 2.5 V to 5.5 V. This extended range provides design flexibility without compromising compatibility.

Product Status: The LT1815IS6#TRPBF is an active product from Analog Devices Inc., ensuring long-term availability, ongoing manufacturing support, and supply chain reliability. The CLC1015IST6 is obsolete and subject to discontinuation.

Compliance and Certifications: The LT1815IS6#TRPBF is RoHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components in industrial and commercial applications.

Performance Characteristics: The substitute part demonstrates enhanced performance in slew rate (1500 V/µs versus 145 V/µs), lower input offset voltage (200 µV versus 1.4 mV), and lower input bias current (2 µA versus 3 µA), providing improved signal fidelity and reduced offset errors in precision applications.

Frequently Asked Questions (FAQ)

Q: Can the LT1815IS6#TRPBF be used as a direct replacement for the CLC1015IST6 without PCB modifications?

A: Yes. Both devices use the TSOT-23-6 package with identical pin configurations and footprints. Direct PCB substitution is possible without layout changes.

Q: What is the primary reason for substituting the CLC1015IST6?

A: The CLC1015IST6 is classified as obsolete and is no longer manufactured by MaxLinear, Inc. The LT1815IS6#TRPBF is an active product with guaranteed long-term availability and manufacturing support.

Q: Are there any supply voltage compatibility concerns?

A: No. The LT1815IS6#TRPBF operates across 2.5 V to 11 V, which fully encompasses the CLC1015IST6 operating range of 2.5 V to 5.5 V. Designs operating within the original 2.5 V to 5.5 V range will function identically.

Q: How do the performance specifications compare?

A: The LT1815IS6#TRPBF provides enhanced performance in multiple parameters: slew rate is 10 times higher, input offset voltage is 7 times lower, and input bias current is slightly lower. These improvements do not create compatibility issues and generally enhance circuit performance.

Q: Is the LT1815IS6#TRPBF available in the same packaging format?

A: Yes. The LT1815IS6#TRPBF is supplied in Tape & Reel (TR) packaging in the TSOT-23-6 format, suitable for automated assembly processes.

Q: What regulatory compliance does the substitute part meet?

A: The LT1815IS6#TRPBF is RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic components.

Q: Are there any circuit design modifications required when switching to the LT1815IS6#TRPBF?

A: No circuit modifications are required. The substitute part is functionally equivalent and pin-compatible. Existing circuit designs will operate without changes.