CLC1010IST5 Equivalent & Substitute Parts

Part Overview

The CLC1010IST5 is a voltage feedback operational amplifier manufactured by MaxLinear, Inc., designed for single-circuit rail-to-rail applications in a compact SOT-23-5 surface mount package. This device is classified as obsolete, necessitating identification of active equivalent components for new designs and production continuity. The CLC1010IST5 delivers a gain bandwidth product of 7.3 MHz with a slew rate of 9 V/µs, suitable for general-purpose analog signal conditioning applications requiring moderate bandwidth and speed performance.

Substiute Parts

CLC1010IST5

MaxLinear, Inc.In Stock: 3833CLC1010IST5 Datasheet

Current PartRFQ

FAN4174IS5X

onsemiIn Stock: 62160FAN4174IS5X Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CLC1010IST5 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Amplifier Type: Voltage Feedback
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Package / Case: SC-74A, SOT-753 (SOT-23-5)
• Mounting Type: Surface Mount
• Operating Temperature Range: -40°C to 85°C minimum

Secondary Compatibility Parameters:

• Slew Rate: Equal to or greater than 9 V/µs
• Gain Bandwidth Product: Equal to or greater than 7.3 MHz
• -3dB Bandwidth: Equal to or greater than 3.4 MHz
• Current - Input Bias: Equal to or less than 90 nA
• Voltage - Input Offset: Equal to or less than 1 mV
• Current - Supply: Equal to or less than 70 µA
• Current - Output / Channel: Equal to or greater than 4 mA
• Voltage - Supply Span: Minimum 2.5 V to Maximum 5.5 V

The FAN4174IS5X manufactured by onsemi meets the primary substitution criteria and maintains functional compatibility within the specified electrical operating envelope.

Parameter Comparison

Engineering Selection Recommendations

The FAN4174IS5X is the primary substitute for the obsolete CLC1010IST5. Both devices share identical package specifications (SC-74A, SOT-753), mounting type (surface mount), and operating temperature range (-40°C to 85°C). The FAN4174IS5X is manufactured by onsemi and maintains active product status with full availability.

Compliance and Certifications:

• FAN4174IS5X is RoHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components
• CLC1010IST5 is classified as obsolete and carries no current compliance certifications

Electrical Performance Considerations: The FAN4174IS5X exhibits lower slew rate (3 V/µs versus 9 V/µs) and reduced gain bandwidth product (3.7 MHz versus 7.3 MHz) compared to the CLC1010IST5. The substitute device demonstrates superior input bias current performance (5 pA versus 90 nA) and higher output current capability (33 mA versus 4 mA). Supply current consumption is elevated (200 µA versus 70 µA). Input offset voltage is higher (8 mV versus 1 mV). The supply voltage range of the FAN4174IS5X (2.3 V to 5.25 V) is compatible with the original specification (2.5 V to 5.5 V) with minor overlap reduction at the lower supply boundary.

Applications requiring the original slew rate and bandwidth performance of the CLC1010IST5 must evaluate whether the reduced dynamic performance of the FAN4174IS5X is acceptable for the specific circuit implementation.

Frequently Asked Questions (FAQ)

Q: Can the FAN4174IS5X be used as a direct replacement for the CLC1010IST5 in existing designs?

A: The FAN4174IS5X is mechanically and functionally compatible in terms of package type (SOT-23-5), pin configuration, and operating temperature range. However, electrical performance differs significantly. The substitute exhibits lower slew rate and gain bandwidth product, which may affect circuit performance in applications sensitive to transient response or high-frequency operation. Circuit validation is required for each specific application.

Q: What are the key differences in electrical performance between these devices?

A: The CLC1010IST5 provides higher slew rate (9 V/µs) and gain bandwidth product (7.3 MHz), making it suitable for faster signal conditioning. The FAN4174IS5X offers superior input bias current (5 pA), higher output current (33 mA), and lower input offset voltage stability. The FAN4174IS5X consumes approximately three times more supply current (200 µA versus 70 µA).

Q: Are there supply voltage compatibility issues between these devices?

A: Both devices operate within overlapping supply voltage ranges. The CLC1010IST5 operates from 2.5 V to 5.5 V, while the FAN4174IS5X operates from 2.3 V to 5.25 V. Applications using supply voltages between 2.5 V and 5.25 V are fully compatible. Applications requiring operation below 2.5 V or above 5.25 V require alternative component selection.

Q: What is the significance of the product status difference?

A: The CLC1010IST5 is classified as obsolete, indicating discontinued manufacturing and limited availability. The FAN4174IS5X maintains active product status with full manufacturing support and availability. New designs must transition to active components; obsolete parts are suitable only for legacy system maintenance with existing inventory.

Q: How do the package specifications compare?

A: Both devices use identical package specifications: SC-74A, SOT-753 (SOT-23-5), surface mount configuration. Pin-to-pin compatibility is maintained, allowing direct physical substitution on printed circuit boards without layout modification.

Q: What compliance certifications apply to the substitute part?

A: The FAN4174IS5X is RoHS3 compliant and REACH unaffected. The obsolete CLC1010IST5 carries no current compliance certifications. New designs and production must utilize the FAN4174IS5X to meet current regulatory requirements.