CLC1006ISO8X Equivalent & Substitute Parts

Part Overview

The CLC1006ISO8X is a voltage feedback amplifier manufactured by MaxLinear, Inc., featuring a single circuit in an 8-SOIC package. This device is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement. The CLC1006ISO8X delivers a slew rate of 1400V/µs with a -3dB bandwidth of 500 MHz, suitable for high-speed signal conditioning applications. Due to its obsolete status, active alternative components from major manufacturers are available to maintain design continuity.

Substiute Parts

CLC1006ISO8X

MaxLinear, Inc.In Stock: 22805CLC1006ISO8X Datasheet

Current PartRFQ

AD8037ARZ-REEL

Analog Devices Inc.In Stock: 21946AD8037ARZ-REEL Datasheet

MFR RecommendedRFQ

OPA690ID

Texas InstrumentsIn Stock: 1909OPA690ID Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CLC1006ISO8X is determined by the following critical parameters:

Package Compatibility: All substitute parts must use the 8-SOIC (0.154", 3.90mm Width) surface mount package to ensure direct PCB compatibility without layout modifications.

Amplifier Architecture: All candidates must be voltage feedback amplifiers with a single circuit configuration, maintaining functional equivalence in signal conditioning applications.

Electrical Performance Envelope: Substitute parts must operate within the supply voltage range of 4.5V to 12V and maintain the operating temperature range of -40°C to 85°C. The slew rate (1400V/µs minimum), -3dB bandwidth (500 MHz minimum), input bias current (≤3.2 µA), and output current capability (≥190 mA) define the performance floor for acceptable substitutes.

Moisture Sensitivity: MSL rating of 1 or 2 is acceptable, as both indicate standard handling and storage conditions compatible with manufacturing processes.

The two identified substitute parts meet these criteria while offering active product status and improved specifications in certain parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: OPA690ID (Texas Instruments)

The OPA690ID is the preferred substitute for the CLC1006ISO8X. This device maintains electrical performance parity with the original part, matching the -3dB bandwidth of 500 MHz and supply current of 5.5 mA. The OPA690ID exceeds the original slew rate specification at 1800V/µs and delivers superior input offset voltage performance at 1 mV versus 10 mV. Output current capability of 190 mA meets the 200 mA requirement of the original design. The OPA690ID holds active product status with ROHS3 compliance and EAR99 export classification, ensuring long-term availability and regulatory alignment. Supply voltage range of 5V to 12V encompasses the original 4.5V minimum with a 0.5V offset, requiring verification in designs operating below 5V.

Secondary Substitute: AD8037ARZ-REEL (Analog Devices Inc.)

The AD8037ARZ-REEL provides an alternative from Analog Devices with active product status and ROHS3 compliance. This device delivers improved slew rate performance at 1500V/µs and superior input offset voltage at 2 mV. However, the -3dB bandwidth of 270 MHz falls below the original 500 MHz specification, making this substitute suitable only for applications where bandwidth reduction is acceptable. Supply current of 18.5 mA represents a 3.4x increase over the original 5.5 mA specification, requiring thermal and power budget reassessment. Output current capability of 70 mA is significantly reduced from the original 200 mA, limiting this substitute to low-current output applications. Minimum supply voltage of 6V exceeds the original 4.5V floor. The AD8037ARZ-REEL is classified under the CLAMPIN™ series and carries REACH Unaffected status.

Compliance and Availability:

Both substitute parts are ROHS3 compliant and carry EAR99 export classification, meeting current regulatory requirements. The OPA690ID is available in higher inventory (1865 Pcs) compared to the AD8037ARZ-REEL (21836 Pcs), though both maintain active production status. The CLC1006ISO8X remains available in obsolete inventory (22700 Pcs), providing a transition window for design migration.

Frequently Asked Questions (FAQ)

Q: Can the OPA690ID directly replace the CLC1006ISO8X without circuit modifications?

A: The OPA690ID is pin-compatible and functionally equivalent for most applications. However, the minimum supply voltage of 5V versus the original 4.5V requires verification if your design operates at the lower supply threshold. All other electrical parameters either match or exceed the original specification, supporting direct substitution in standard applications.

Q: Why does the AD8037ARZ-REEL have lower -3dB bandwidth than the original part?

A: The AD8037ARZ-REEL is optimized for different performance characteristics, prioritizing slew rate and input offset voltage over bandwidth. The 270 MHz bandwidth is suitable for applications not requiring the full 500 MHz performance envelope of the CLC1006ISO8X. This substitute is appropriate only when bandwidth reduction is acceptable to the system design.

Q: What is the impact of the AD8037ARZ-REEL's higher supply current on my design?

A: The AD8037ARZ-REEL draws 18.5 mA compared to the original 5.5 mA, representing a 3.4x increase. This affects power dissipation, thermal management, and power supply capacity. Designs using this substitute must accommodate increased current draw in the power budget and thermal analysis. The OPA690ID maintains the original 5.5 mA supply current, eliminating this concern.

Q: Are there pinout differences between these parts?

A: All three devices use the 8-SOIC package with identical 0.154" width and 3.90mm dimensions. Pinout compatibility is maintained across the CLC1006ISO8X, AD8037ARZ-REEL, and OPA690ID, enabling direct PCB substitution without layout changes.

Q: What is the significance of the Moisture Sensitivity Level (MSL) difference?

A: The CLC1006ISO8X and AD8037ARZ-REEL carry MSL 1 (Unlimited), while the OPA690ID carries MSL 2 (1 Year). MSL 2 requires storage in controlled humidity conditions and has a one-year shelf life from the date of manufacture. Both levels are standard for surface mount components and do not affect substitution feasibility. Standard manufacturing handling procedures accommodate MSL 2 requirements.

Q: Which substitute should I select for a new design?

A: The OPA690ID is the recommended choice for new designs. It maintains electrical performance parity with the original CLC1006ISO8X, offers active product status with long-term availability, and requires no circuit modifications. The AD8037ARZ-REEL is suitable only when bandwidth reduction and increased supply current are acceptable trade-offs for improved slew rate and input offset voltage performance.

Q: Are these parts available in different packaging options?

A: All three devices are specified in the 8-SOIC surface mount package only. No alternative packaging options are provided in the current product specifications. The OPA690ID is available in Tube packaging, while the CLC1006ISO8X and AD8037ARZ-REEL do not specify packaging format in the provided data.