CLC1001IST6MTR Equivalent & Substitute Parts

Part Overview

The CLC1001IST6MTR is a voltage feedback amplifier manufactured by MaxLinear, Inc., housed in a SOT-23-6 surface mount package. This single-circuit operational amplifier is designed for applications requiring high-speed voltage feedback amplification with a gain bandwidth product of 2.1 GHz and a slew rate of 410 V/µs. The device operates across a supply voltage range of 4 V to 12 V and is rated for temperatures from -40°C to 125°C.

The CLC1001IST6MTR is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for legacy systems utilizing this component.

Substiute Parts

CLC1001IST6MTR

MaxLinear, Inc.In Stock: 1156CLC1001IST6MTR Datasheet

Current PartRFQ

EL5106IWZ-T7A

Renesas Electronics CorporationIn Stock: 4187EL5106IWZ-T7A Datasheet

MFR RecommendedRFQ

LT6200IS6-10#TRPBF

Analog Devices Inc.In Stock: 2660LT6200IS6-10#TRPBF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CLC1001IST6MTR is determined by compatibility across the following critical parameters:

Package and Mounting Compatibility: All substitute parts must use the SOT-23-6 surface mount package to ensure mechanical and electrical compatibility with existing printed circuit board layouts.

Electrical Performance Envelope: Substitute parts must operate within the supply voltage range of 4 V to 12 V minimum and maximum specifications. The slew rate, gain bandwidth product, and bandwidth characteristics define the frequency response and signal fidelity of the amplifier. Substitutes must meet or exceed the performance requirements of the original design.

Thermal Operating Range: The original part operates from -40°C to 125°C. Substitute parts must support at least the minimum operating temperature range required by the application.

Single-Circuit Configuration: All substitutes must be single-circuit amplifiers to maintain pin compatibility and functional equivalence.

Input and Output Characteristics: Current and voltage specifications for input bias, input offset, supply current, and output current define the amplifier's signal integrity and power consumption. Substitutes must be compatible with these parameters within the design's tolerance margins.

The two substitute parts identified—EL5106IWZ-T7A and LT6200IS6-10#TRPBF—satisfy these core substitution criteria while offering different amplifier topologies (general purpose and buffer, respectively) suited to specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

LT6200IS6-10#TRPBF (Recommended for New Designs and Ongoing Production)

The LT6200IS6-10#TRPBF is the preferred substitute for the CLC1001IST6MTR. This buffer amplifier from Analog Devices Inc. is classified as active product status, ensuring long-term availability and continued manufacturing support. The device is RoHS3 compliant and REACH unaffected, meeting current regulatory requirements. The LT6200IS6-10#TRPBF operates across an extended supply voltage range (2.5 V to 12.6 V), providing greater design flexibility than the original part. The MSL rating of 1 (Unlimited) matches the original specification, reducing moisture-related handling risks. The rail-to-rail output configuration provides enhanced signal swing capability. While the gain bandwidth product (1.6 GHz) is lower than the original part, the slew rate (450 V/µs) remains comparable, and the -3dB bandwidth performance is suitable for most applications requiring the CLC1001IST6MTR.

EL5106IWZ-T7A (Alternative for Specific Applications)

The EL5106IWZ-T7A is a general-purpose amplifier from Renesas Electronics Corporation. This device exhibits superior slew rate performance (4500 V/µs) and higher -3dB bandwidth (380 MHz) compared to the original part, making it suitable for applications requiring enhanced transient response and frequency performance. The EL5106IWZ-T7A features lower input bias current (1.5 µA) and reduced supply current (1.5 mA), offering improved power efficiency. However, this substitute is classified as obsolete, limiting long-term availability. The operating temperature range (-40°C to 85°C) is narrower than the original specification, which may restrict use in extended temperature applications. The MSL rating of 2 (1 Year) requires more stringent moisture control during storage and handling compared to the original part.

Supply Voltage Compatibility Consideration

The EL5106IWZ-T7A requires a minimum supply voltage of 5 V, whereas the CLC1001IST6MTR operates from 4 V. Applications utilizing 4 V supply rails must use the LT6200IS6-10#TRPBF, which supports operation at 2.5 V minimum.

Frequently Asked Questions (FAQ)

Q: Can the LT6200IS6-10#TRPBF directly replace the CLC1001IST6MTR in existing designs?

A: The LT6200IS6-10#TRPBF is mechanically and electrically compatible with the CLC1001IST6MTR in SOT-23-6 surface mount applications. Both devices share identical pin configurations and package dimensions. However, the LT6200IS6-10#TRPBF is a buffer amplifier topology, whereas the CLC1001IST6MTR is a voltage feedback amplifier. Circuit performance differences may occur depending on the specific application requirements. Verification of frequency response, gain characteristics, and output impedance is necessary for applications with stringent performance specifications.

Q: What is the primary difference between the EL5106IWZ-T7A and LT6200IS6-10#TRPBF substitutes?

A: The EL5106IWZ-T7A is a general-purpose amplifier with higher slew rate (4500 V/µs) and bandwidth (380 MHz), suitable for high-speed signal conditioning applications. The LT6200IS6-10#TRPBF is a buffer amplifier with rail-to-rail output capability and active product status, providing superior long-term availability and regulatory compliance. The choice between these substitutes depends on application-specific performance requirements and supply chain considerations.

Q: Is the EL5106IWZ-T7A suitable for applications requiring operation below 5 V supply voltage?

A: No. The EL5106IWZ-T7A specifies a minimum supply voltage of 5 V. Applications requiring operation at 4 V supply voltage must use the LT6200IS6-10#TRPBF, which supports supply voltages as low as 2.5 V.

Q: What are the implications of the narrower operating temperature range in the EL5106IWZ-T7A?

A: The EL5106IWZ-T7A operates from -40°C to 85°C, whereas the CLC1001IST6MTR operates to 125°C. Applications requiring operation above 85°C cannot use the EL5106IWZ-T7A. The LT6200IS6-10#TRPBF also operates to 85°C maximum. For extended temperature applications, alternative substitutes outside the provided list may be required.

Q: How do the input offset voltage specifications affect substitution decisions?

A: The CLC1001IST6MTR specifies 350 µV input offset voltage. The EL5106IWZ-T7A specifies 1000 µV, and the LT6200IS6-10#TRPBF specifies 2500 µV. Applications with precision DC signal requirements or low-level signal amplification may require input offset voltage trimming or calibration when substituting to higher offset voltage devices. High-frequency AC applications are generally unaffected by input offset voltage differences.

Q: What is the significance of the MSL (Moisture Sensitivity Level) rating differences?

A: The CLC1001IST6MTR and LT6200IS6-10#TRPBF both carry MSL 1 (Unlimited) ratings, indicating no moisture-related storage restrictions. The EL5106IWZ-T7A carries MSL 2 (1 Year), requiring that the device be used within one year of the moisture barrier bag opening date. For high-volume production environments with extended component storage periods, the MSL 1 rated devices are preferred to reduce risk of moisture-induced failures.

Q: Are the substitute parts RoHS compliant?

A: The LT6200IS6-10#TRPBF is RoHS3 compliant and REACH unaffected. The EL5106IWZ-T7A is RoHS3 compliant and REACH unaffected. Both substitutes meet current regulatory requirements for electronic component manufacturing and distribution in regulated markets.

Q: What packaging format is available for the substitute parts?

A: The EL5106IWZ-T7A is supplied in Tape & Reel (TR) packaging. The LT6200IS6-10#TRPBF is supplied in Tape & Reel (TR) packaging. Both formats are suitable for automated assembly processes. The original CLC1001IST6MTR packaging format is not specified in the provided data.