Request Quote
(Ships tomorrow)
CLB-153-11ANN-W-D Equivalent & Substitute Parts
Part Overview
The CLB-153-11ANN-W-D is a thermal circuit breaker manufactured by Carling Technologies, rated for 15A at 250V AC and 32V DC with push-to-reset actuation and panel mount configuration. This component is classified as Active product status and carries multiple regulatory approvals including CE, cUL, TUV, UL1077, and UL1500 certifications. The device is ROHS3 compliant and REACH unaffected. Substitute parts are identified based on matching electrical specifications, mechanical mounting requirements, and regulatory compliance standards to ensure direct functional equivalence in circuit protection applications.
Substiute Parts
Key Parameters
| Parameter | Specification |
|---|---|
| Breaker Type | Thermal |
| Current Rating | 15A |
| Voltage Rating - AC | 250V |
| Voltage Rating - DC | 32V |
| Actuator Type | Push to Reset |
| Mounting Type | Panel Mount |
| Number of Poles | 1 |
| Illumination | None |
| RoHS Status | ROHS3 Compliant |
Substitute Part Grouping Explanation
Substitute parts for the CLB-153-11ANN-W-D are qualified based on the following critical parameters that determine functional equivalence:
Electrical Specifications: Current rating of 15A, AC voltage rating of 250V, and DC voltage rating of 32V or higher form the primary substitution criteria. All identified substitute parts maintain the 15A current rating and 250V AC specification. DC voltage ratings in substitute parts are rated at 50V, which exceeds the 32V requirement of the main part.
Mechanical Configuration: Panel mount configuration and single-pole design are mandatory for substitution. All substitute parts maintain these mechanical characteristics.
Actuation and Control: Push-to-reset actuator type without illumination is required for direct substitution. All substitute parts conform to this specification.
Regulatory Compliance: Substitute parts must carry active product status and maintain ROHS3 compliance. All identified substitutes meet these requirements with certifications including cURus, IP 40, SAE J1171, UL 1077, and UL 1500.
Parameter Comparison
| Part Number | Manufacturer | Current Rating (A) | Voltage AC (V) | Voltage DC (V) | Mounting Type | Actuator Type | Poles | RoHS Status | Product Status |
|---|---|---|---|---|---|---|---|---|---|
| CLB-153-11ANN-W-D | Carling Technologies | 15 | 250 | 32 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-EJ-15A | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-EL4-15A | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-ES-15A | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-ES-15A-5X | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-GS-15A-WB | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-HB-15A-P | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-HS-15A-5X | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-PB-15A | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-PB-15A-5X | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
| CBW57-PB-15A-WX | OptiFuse | 15 | 250 | 50 | Panel Mount | Push to Reset | 1 | ROHS3 Compliant | Active |
Engineering Selection Recommendations
All identified substitute parts from the OptiFuse CBW57 series meet the functional and regulatory requirements for direct substitution with the CLB-153-11ANN-W-D. The following factors support selection:
Electrical Compatibility: All substitute parts maintain the 15A current rating and 250V AC voltage specification. The 50V DC rating in substitute parts provides enhanced voltage margin above the 32V DC requirement of the main part, ensuring operation within specified limits across the full range of intended applications.
Regulatory Compliance: All substitute parts carry Active product status and ROHS3 compliance. Substitute parts include certifications for cURus, IP 40, SAE J1171, UL 1077, and UL 1500, which align with or exceed the approval agencies listed for the main part (CE, cUL, TUV, UL1077, UL1500).
Mechanical and Functional Equivalence: Panel mount configuration, single-pole design, and push-to-reset actuation are consistent across all parts. No illumination is present in any part, maintaining functional parity.
Inventory Availability: OptiFuse CBW57 series parts demonstrate varying inventory levels, with CBW57-HB-15A-P offering the highest stock position at 8,822 pieces, followed by CBW57-ES-15A at 3,521 pieces.
Frequently Asked Questions (FAQ)
Q: What are the primary criteria for substituting the CLB-153-11ANN-W-D?
A: Substitution is based on matching the 15A current rating, 250V AC voltage specification, 32V DC minimum voltage rating, panel mount configuration, single-pole design, and push-to-reset actuation. All substitute parts meet or exceed these parameters.
Q: Why do substitute parts have a 50V DC rating when the main part is rated for 32V DC?
A: The 50V DC rating in substitute parts represents a higher voltage capability. This exceeds the 32V DC requirement and does not create incompatibility; the substitute part operates safely at the lower voltage of the main part specification.
Q: Are all substitute parts ROHS3 compliant?
A: Yes, all identified substitute parts from the OptiFuse CBW57 series are ROHS3 compliant, matching the environmental compliance status of the main part.
Q: Do substitute parts carry the same regulatory certifications as the CLB-153-11ANN-W-D?
A: Substitute parts carry certifications including cURus, IP 40, SAE J1171, UL 1077, and UL 1500. These certifications align with the approval agencies of the main part, which include CE, cUL, TUV, UL1077, and UL1500.
Q: What is the difference between the various CBW57 part number variants?
A: The CBW57 series variants (EJ, EL4, ES, GS, HB, HS, PB, etc.) represent different connector or terminal configurations and packaging options within the same electrical and mechanical specification class. All maintain the 15A, 250V AC, 50V DC ratings and panel mount push-to-reset design.
Q: Can I use a substitute part with higher DC voltage rating in a 32V DC application?
A: Yes. A component rated for 50V DC operates safely in applications requiring 32V DC. The higher rating provides additional safety margin and does not affect performance in lower voltage applications.
Q: Are substitute parts available in bulk packaging?
A: Yes, all identified substitute parts are available in bulk packaging, consistent with the packaging specification of the main part.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts