CL2ZC LED Engine Equivalent & Substitute Parts

Part Overview

The CL2ZC is a Dialight LED Engine classified as an obsolete product. It is a warm white linear light strip module featuring a plug-and-play configuration with integrated connector. The unit delivers 204 lumens (typical) at 3000K color temperature with a 75 CRI rating, designed for applications requiring compact, linear LED lighting solutions.

Due to its obsolete status, sourcing direct replacements from current manufacturer inventories may be limited. Identifying equivalent substitute parts requires matching the core functional and mechanical parameters that define this product category.

Substiute Parts

CL2ZC

DialightIn Stock: 1030CL2ZC Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CL2ZC must satisfy the following critical parameters to ensure functional and mechanical compatibility:

Primary Matching Criteria:

• Product Type: LED Engine or equivalent LED lighting module
• Configuration: Linear light strip format with plug-and-play connector interface
• Color Temperature: 3000K warm white
• Luminous Flux: Approximately 204 lm (tolerance range acceptable per application requirements)
• CRI: Minimum 75 or higher
• Lens Type: Flat optical surface
• Physical Form Factor: Linear strip geometry compatible with 911.35 mm length and 25.40 mm width envelope
• Connector Type: Standardized plug-and-play interface matching CL2 series specifications

Substitute parts must originate from manufacturers with current production status and established supply chain availability. The obsolete status of the CL2ZC necessitates identification of modern equivalent LED engine modules that maintain the specified optical, thermal, and mechanical characteristics.

Parameter Comparison

No substitute parts were provided in the input data. A complete parameter comparison table cannot be generated without specific alternative part numbers and their corresponding technical specifications.

To establish a valid comparison, substitute part candidates must include the following documented parameters:

• Manufacturer and part number
• Luminous flux output
• Color temperature (CCT)
• CRI value
• Physical dimensions
• Connector type and compatibility
• Product status and availability

Engineering Selection Recommendations

Obsolete Product Consideration: The CL2ZC carries an obsolete product status, indicating discontinued manufacturing and limited inventory availability. Component selection strategy should prioritize:

1. Verification of remaining stock from authorized Dialight distributors
2. Identification of current-generation LED engine modules from Dialight or equivalent manufacturers that maintain the CL2 series form factor and connector standard
3. Confirmation that substitute modules meet or exceed the specified 204 lm output, 3000K color temperature, and 75 CRI minimum requirements
4. Validation of connector compatibility with existing system integration points

Compliance and Certification: Substitute parts must maintain equivalent MSL ratings and environmental compliance classifications. The CL2ZC MSL 1 (Unlimited) rating indicates low moisture sensitivity; substitute modules should maintain equivalent or superior moisture protection characteristics.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the CL2ZC? A: A valid substitute must match the core functional parameters: linear light strip configuration, 3000K color temperature, minimum 75 CRI, approximately 204 lm output, flat lens type, and compatible plug-and-play connector interface. Physical dimensions should align with the 911.35 mm × 25.40 mm envelope.

Q: Why is the CL2ZC listed as obsolete? A: Obsolete status indicates the manufacturer has discontinued production. This affects long-term availability and may require transition to current-generation equivalent products for new designs or large-volume requirements.

Q: Can I use a substitute part with different connector types? A: Connector compatibility is critical for system integration. Substitute parts must feature plug-and-play connectors matching the CL2 series standard. Adapter solutions may introduce reliability risks and are not recommended for direct substitution.

Q: What is the significance of the 75 CRI rating? A: CRI (Color Rendering Index) measures how accurately a light source reproduces colors compared to natural daylight. A CRI of 75 indicates acceptable color rendering for general lighting applications. Substitute parts should maintain this minimum CRI or higher to preserve color accuracy in the application.

Q: How do I verify luminous flux compatibility? A: The CL2ZC delivers 204 lm (typical) at 25°C. Substitute modules should deliver equivalent or greater luminous flux under identical test conditions. Verify test temperature and current specifications when comparing lumen output across different manufacturers.

Q: What does MSL 1 (Unlimited) mean for component handling? A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. Substitute parts with equivalent or lower MSL ratings maintain this advantage.