LED Engine CL2WF Equivalent & Substitute Parts Reference

Part Overview

The Dialight CL2WF is a LED Engine module classified as a warm white linear light strip with integrated connector, designed for plug-and-play applications. This component is rated at 3000K color temperature with a typical luminous flux of 242 lumens and a Color Rendering Index (CRI) of 75. The product is currently listed as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations.

Substiute Parts

CL2WF

DialightIn Stock: 812CL2WF Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent and substitute parts for the CL2WF must satisfy the following critical parameters to ensure functional compatibility:

• Color Temperature (CCT): 3000K warm white specification
• Configuration Type: Linear light strip format with integrated connector
• Luminous Flux Range: Approximately 242 lumens (typical)
• Color Rendering Index (CRI): Minimum 75 or higher
• Physical Form Factor: Flat lens, linear geometry compatible with 911.35 mm length and 25.40 mm width envelope
• Connector Interface: Plug-and-play connector compatibility
• Moisture Sensitivity: MSL 1 classification

Substitutes must maintain these electrical and mechanical characteristics to ensure drop-in compatibility within existing system designs. Deviations in any of these parameters may require mechanical or electrical redesign of the host application.

Parameter Comparison

Currently, no substitute parts have been identified in the available database that meet all specified parameters for the CL2WF. Any future substitute candidates must be evaluated against the key parameters table above to confirm functional equivalence.

Engineering Selection Recommendations

The CL2WF is classified as an obsolete product. For applications currently using this component, the following engineering approach is recommended:

• Direct Replacement: Seek functionally equivalent LED engine modules from Dialight or other manufacturers that match the specified parameters in the Key Parameters table.
• Compliance Verification: Confirm that any substitute part maintains MSL 1 classification and is suitable for the intended operating environment.
• Mechanical Fit: Verify that substitute parts conform to the 911.35 mm × 25.40 mm form factor and connector interface to ensure mechanical compatibility.
• Photometric Validation: Confirm that substitute parts deliver equivalent luminous flux (approximately 242 lumens) and maintain CRI ≥ 75 for color accuracy.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the CL2WF?

A: A valid substitute must match the following criteria: 3000K color temperature, linear light strip configuration with plug-and-play connector, approximately 242 lumens luminous flux, CRI of 75 or higher, flat lens type, and physical dimensions compatible with 911.35 mm length and 25.40 mm width.

Q: Why is the CL2WF listed as obsolete?

A: The product status indicates that this component is no longer manufactured by Dialight. Existing inventory may be available through authorized distributors, but long-term availability cannot be guaranteed.

Q: Can I use a different color temperature LED engine as a substitute?

A: No. The 3000K warm white specification is a critical parameter. Substituting with a different CCT (such as 4000K or 5000K) will alter the color appearance and may not meet the original application requirements.

Q: What is MSL 1 and why does it matter?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited moisture tolerance. This classification ensures the component can be stored and handled without special moisture control measures, making it suitable for standard manufacturing environments.

Q: Are there any certifications or compliance standards listed for this part?

A: The ECCN classification is listed as OBSOLETE. Verify current compliance requirements with your application's regulatory framework before finalizing any substitute selection.