LED Engine CL2NC Equivalent & Substitute Parts Reference

Part Overview

The Dialight CL2NC is a LED Engine classified as an obsolete product. It is a white, neutral linear light strip with a 4100K color temperature, designed for plug-and-play integration. With a typical luminous flux of 288lm and a CRI of 75, this component was engineered for general lighting applications requiring standardized LED engine modules.

Due to its obsolete status, sourcing original CL2NC units is limited. This reference page addresses the need to identify functionally equivalent alternatives for ongoing maintenance, repair, and new design applications where this specification remains relevant.

Substiute Parts

CL2NC

DialightIn Stock: 1095CL2NC Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the CL2NC LED Engine is determined by the following critical parameters:

• Color Temperature (CCT): 4100K neutral white
• Configuration: Linear light strip with plug-and-play connector interface
• Luminous Flux: Approximately 288lm typical output
• Color Rendering Index (CRI): Minimum 75
• Physical Dimensions: 911.35mm length x 25.40mm width with flat lens
• Connector Type: Integrated connector for direct integration
• Moisture Sensitivity: MSL 1 rating

Equivalent alternatives must match these parameters within standard engineering tolerances. No substitute parts have been identified in the provided database for this specific configuration.

Parameter Comparison

Engineering Selection Recommendations

The CL2NC is classified as an obsolete product. For applications currently using this LED engine, the following engineering approach is recommended:

1. Direct Replacement: Verify availability through authorized Dialight distributors or component inventory specialists. Original stock may remain available through secondary market channels.

2. Design Revision: For new designs or long-term production requirements, evaluate current-generation LED engine modules from Dialight or equivalent manufacturers that meet the specified parameters: 4100K CCT, linear strip configuration, 288lm output range, CRI ≥75, and connector-based integration.

3. Compliance Verification: Ensure any alternative component maintains MSL 1 rating and meets the same environmental and electrical specifications as the original CL2NC.

4. Mechanical Compatibility: Confirm that substitute components accommodate the 911.35mm x 25.40mm dimensional envelope and flat lens profile required by the host application.

Frequently Asked Questions (FAQ)

Q: Why is the CL2NC classified as obsolete? A: The CL2NC has reached end-of-life status with Dialight. Manufacturer support and new production have been discontinued.

Q: What are the critical parameters for finding a substitute LED engine? A: The substitute must match: 4100K color temperature, linear light strip configuration, plug-and-play connector, approximately 288lm luminous flux, CRI of 75 or higher, and 911.35mm x 25.40mm dimensions.

Q: Can I use a different color temperature LED engine as a substitute? A: No. The 4100K neutral white specification is a functional requirement. Substitutes must maintain this exact CCT to preserve color consistency in the application.

Q: What does MSL 1 rating mean for component selection? A: MSL 1 indicates unlimited moisture sensitivity protection. Any substitute component must maintain this same MSL rating to ensure reliability in the intended environment.

Q: Are there current-generation alternatives available? A: No current-generation equivalents have been identified in the available database. Contact authorized Dialight distributors or component specialists for current product recommendations that meet these specifications.

Q: What should I verify before implementing a substitute component? A: Verify connector compatibility, mechanical fit within the 911.35mm x 25.40mm envelope, electrical performance at 25°C test conditions, and compliance with the host system's environmental requirements.