CL10F474ZP8NNNC Equivalent & Substitute Parts

Part Overview

The CL10F474ZP8NNNC is a 0.47 µF ceramic capacitor manufactured by Samsung Electro-Mechanics, rated at 10V with Y5V temperature coefficient in 0603 (1608 Metric) surface mount package. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is suitable for general-purpose applications requiring stable capacitance across the operating temperature range of -30°C to 85°C. Equivalent and substitute parts are identified based on matching or exceeding electrical specifications while maintaining identical mechanical form factors and compliance certifications.

Substiute Parts

CL10F474ZP8NNNC

Samsung Electro-MechanicsIn Stock: 895CL10F474ZP8NNNC Datasheet

Current PartRFQ

CL10F474ZA8NNNC

Samsung Electro-MechanicsIn Stock: 1956CL10F474ZA8NNNC Datasheet

UpgradeRFQ

KGM15AV51A474ZT

KYOCERA AVXIn Stock: 17966KGM15AV51A474ZT Datasheet

DirectRFQ

C0603C474Z4VAC7867

KEMETIn Stock: 11961C0603C474Z4VAC7867 Datasheet

UpgradeRFQ

KGM15AV51C474ZT

KYOCERA AVXIn Stock: 28441KGM15AV51C474ZT Datasheet

UpgradeRFQ

C0603C474Z8VAC7867

KEMETIn Stock: 2015C0603C474Z8VAC7867 Datasheet

Parametric EquivalentRFQ

CC0603ZRY5V6BB474

YAGEOIn Stock: 5787CC0603ZRY5V6BB474 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CL10F474ZP8NNNC are classified into three categories based on electrical parameter alignment:

Parametric Equivalent (Direct Substitutes): Parts matching all primary electrical specifications (0.47 µF, 10V, -20%/+80% tolerance, Y5V coefficient) with identical 0603 package dimensions. These parts are interchangeable without circuit redesign.

Direct Manufacturer Equivalent: Parts from alternative manufacturers (KYOCERA AVX, KEMET, YAGEO) with identical electrical ratings and mechanical form factor. Substitution requires verification of PCB assembly compatibility and supplier qualification.

Upgrade Substitutes: Parts with higher voltage ratings (16V or 25V) maintaining identical capacitance, tolerance, and package specifications. These provide enhanced voltage margin and are suitable for applications where circuit voltage may increase or where design margin is required.

The substitution logic is based strictly on the following allowed parameters:

• Capacitance value (0.47 µF fixed)
• Voltage rating (10V minimum; higher ratings acceptable)
• Tolerance range (-20%, +80% required)
• Temperature coefficient (Y5V required)
• Package form factor (0603 / 1608 Metric required)
• Mounting type (Surface Mount MLCC required)
• Compliance certifications (ROHS3, MSL 1)

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution (No Circuit Redesign Required):

Select KGM15AV51A474ZT (KYOCERA AVX), C0603C474Z8VAC7867 (KEMET), or CC0603ZRY5V6BB474 (YAGEO) when the CL10F474ZP8NNNC is unavailable. These parts maintain identical electrical specifications (0.47 µF, 10V, Y5V) and mechanical form factor. All three alternatives carry Active product status and ROHS3 compliance. Inventory availability is highest for KGM15AV51A474ZT (17,884 pcs) and KGM15AV51C474ZT (28,379 pcs).

For Enhanced Voltage Margin:

Select C0603C474Z4VAC7867 (KEMET, 16V) or KGM15AV51C474ZT (KYOCERA AVX, 16V) when circuit design permits higher voltage rating. These upgrade substitutes provide 60% additional voltage headroom while maintaining identical capacitance and tolerance specifications. Both are Active status with ROHS3 compliance.

Avoid:

CL10F474ZA8NNNC (Samsung Electro-Mechanics, 25V) is classified as Obsolete product status and should not be selected for new designs despite higher voltage rating.

Compliance Verification:

All recommended substitutes maintain ROHS3 compliance, MSL 1 (Unlimited) rating, and REACH Unaffected status. No additional compliance documentation is required for substitution within this group.

Frequently Asked Questions (FAQ)

Q: Can I use a 16V or 25V rated capacitor in place of the 10V CL10F474ZP8NNNC?

A: Yes. Higher voltage-rated capacitors (16V or 25V) with identical capacitance (0.47 µF), tolerance (-20%, +80%), and temperature coefficient (Y5V) are direct substitutes. The higher voltage rating provides additional design margin and does not affect circuit operation. However, the 25V variant (CL10F474ZA8NNNC) is Obsolete status and should not be used in new designs.

Q: Are there any physical dimension differences between substitute parts?

A: All substitute parts maintain the 0603 (1608 Metric) package form factor. Minor variations exist in thickness: Samsung and KEMET parts measure 0.035" (0.90mm) maximum, while KYOCERA AVX measures 0.035" (0.90mm) and YAGEO measures 0.035" (0.90mm). These variations are within standard PCB assembly tolerances and do not affect interchangeability.

Q: What is the difference between the CL10F474ZP8NNNC and CL10F474ZA8NNNC?

A: The primary difference is voltage rating: CL10F474ZP8NNNC is rated 10V while CL10F474ZA8NNNC is rated 25V. Both share identical capacitance (0.47 µF), tolerance, and temperature coefficient. The CL10F474ZA8NNNC is Obsolete status and should not be selected for new designs.

Q: Which substitute has the highest inventory availability?

A: KGM15AV51C474ZT (KYOCERA AVX, 16V rating) has the highest inventory at 28,379 pcs, followed by KGM15AV51A474ZT (KYOCERA AVX, 10V rating) at 17,884 pcs.

Q: Do all substitutes carry the same compliance certifications?

A: Yes. All recommended substitutes (KGM15AV51A474ZT, C0603C474Z8VAC7867, CC0603ZRY5V6BB474, C0603C474Z4VAC7867, KGM15AV51C474ZT) are ROHS3 Compliant, REACH Unaffected, and carry MSL 1 (Unlimited) rating. No additional compliance verification is required.

Q: Can I mix different manufacturers' parts in the same PCB assembly?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. Mixed-manufacturer assemblies are acceptable provided all parts are sourced from qualified suppliers and meet the same compliance requirements.

Q: What is the operating temperature range for all substitute parts?

A: All parts, including the main part and all substitutes, operate across -30°C to 85°C with Y5V temperature coefficient. This specification is consistent across all manufacturers.