CKRB6010-10 Equivalent & Substitute Parts

Part Overview

The CKRB6010-10 is a Solid State Relay (SSR) manufactured by Sensata-Crydom, configured as SPST-NO (1 Form A) with integrated heat sink. This component operates at 10A load current across a 48-660V range with 90-280VAC/DC input voltage capability. The part is currently in active production status with 980 units available in new original inventory. Substitute parts are identified to address application requirements where higher current capacity, alternative voltage specifications, or different packaging configurations are necessary.

Key Parameters

Parameter	CKRB6010-10 Specification
Manufacturer	Sensata-Crydom
Series	CKR60
Circuit Configuration	SPST-NO (1 Form A)
Output Type	AC
Load Current	10 A
Load Voltage Range	48 V ~ 660 V
Input Voltage	90 ~ 280 VAC/DC
Termination Style	Screw Terminal
Package Type	SSR with Integrated Heat Sink
Mounting Type	DIN Rail
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

The DR2260A20UR qualifies as a substitute for the CKRB6010-10 based on the following alignment of critical electrical and mechanical parameters:

Matching Parameters:

Manufacturer: Sensata-Crydom (same manufacturer ensures design compatibility)
Circuit Configuration: SPST-NO (1 Form A) (identical switching topology)
Output Type: AC (same output classification)
Termination Style: Screw Terminal (compatible connection method)
Package Type: SSR with Integrated Heat Sink (same thermal management approach)
Mounting Type: DIN Rail (identical mounting standard)
RoHS Status: RoHS Compliant (equivalent regulatory compliance)

Allowable Differences:

Load Current: 20 A (higher capacity; acceptable for applications requiring increased current handling)
Load Voltage Range: 48 V ~ 600 V (slightly reduced upper limit; acceptable where maximum voltage requirement does not exceed 600 V)
Input Voltage: 90 ~ 280 VAC/DC (identical specification)
Series: DR22 (different series designation reflects design evolution within the same product family)

Parameter Comparison

Parameter	CKRB6010-10	DR2260A20UR	Compatibility Notes
Manufacturer	Sensata-Crydom	Sensata-Crydom	Same manufacturer
Circuit Configuration	SPST-NO (1 Form A)	SPST-NO (1 Form A)	Identical topology
Output Type	AC	AC	Identical output type
Load Current	10 A	20 A	DR2260A20UR provides higher capacity
Load Voltage Range	48 V ~ 660 V	48 V ~ 600 V	DR2260A20UR suitable for applications ≤ 600 V
Input Voltage	90 ~ 280 VAC/DC	90 ~ 280 VAC/DC	Identical specification
Termination Style	Screw Terminal	Screw Terminal	Compatible connection method
Package Type	SSR with Integrated Heat Sink	SSR with Integrated Heat Sink	Identical thermal design
Mounting Type	DIN Rail	DIN Rail	Identical mounting standard
RoHS Status	RoHS Compliant	RoHS Compliant	Equivalent compliance
Product Status	Active	Active	Both in active production

Engineering Selection Recommendations

Primary Substitute: DR2260A20UR

The DR2260A20UR is the manufacturer-recommended substitute for the CKRB6010-10. Both components are manufactured by Sensata-Crydom and maintain active product status. Selection between these parts depends on application load current requirements:

Use CKRB6010-10 where load current does not exceed 10 A and maximum load voltage reaches 660 V.
Use DR2260A20UR where load current requirements range up to 20 A and maximum load voltage does not exceed 600 V.

Both parts carry RoHS Compliant certification, ensuring equivalent environmental and regulatory compliance. The identical input voltage specification (90-280 VAC/DC), circuit configuration (SPST-NO), termination style (Screw Terminal), and mounting type (DIN Rail) confirm direct functional interchangeability within the specified electrical operating ranges.

Frequently Asked Questions (FAQ)

Q: Can DR2260A20UR replace CKRB6010-10 in all applications?

A: DR2260A20UR is suitable as a substitute where the application load current requirement does not exceed 20 A and the maximum load voltage does not exceed 600 V. If your application requires load voltages above 600 V, the CKRB6010-10 must be retained.

Q: What is the primary difference between these two SSR relays?

A: The CKRB6010-10 is rated for 10 A at 48-660 V, while the DR2260A20UR is rated for 20 A at 48-600 V. The DR2260A20UR provides higher current capacity but with a reduced maximum voltage specification.

Q: Are the input voltage specifications identical?

A: Yes. Both the CKRB6010-10 and DR2260A20UR accept 90-280 VAC/DC input voltage. Input voltage compatibility is not a limiting factor in substitution.

Q: Do both parts use the same mounting and termination methods?

A: Yes. Both components feature DIN Rail mounting and Screw Terminal termination, ensuring mechanical and electrical connection compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both the CKRB6010-10 and DR2260A20UR are RoHS Compliant, meeting equivalent environmental and regulatory standards.

Q: What should I verify before substituting DR2260A20UR for CKRB6010-10?

A: Verify that your application load current does not exceed 20 A and that the maximum load voltage requirement does not exceed 600 V. Confirm that the 90-280 VAC/DC input voltage specification matches your control circuit voltage.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message