CJD200 TR13 Equivalent & Substitute Parts

Part Overview

The CJD200 TR13 is a Surface Mount NPN Bipolar Junction Transistor manufactured by Central Semiconductor Corp, rated for 25V collector-emitter breakdown voltage and 5A maximum collector current. This component is classified as Obsolete, necessitating identification of active equivalent alternatives for new designs and production continuity. Substitute parts must maintain identical electrical characteristics and mechanical compatibility to ensure direct replacement capability in existing circuit applications.

Substiute Parts

CJD200 TR13

Central Semiconductor CorpIn Stock: 1295CJD200 TR13 Datasheet

Current PartRFQ

MJD200RLG

onsemiIn Stock: 5769MJD200RLG Datasheet

Parametric EquivalentRFQ

MJD200T4G

onsemiIn Stock: 15577MJD200T4G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CJD200 TR13 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must match exactly:

Electrical Parameters (Must Match):

• Transistor Type: NPN
• Current - Collector (Ic) (Max): 5 A
• Voltage - Collector Emitter Breakdown (Max): 25 V
• Vce Saturation (Max) @ Ib, Ic: 1.8V @ 1A, 5A
• Current - Collector Cutoff (Max): 100nA (ICBO)
• DC Current Gain (hFE) (Min) @ Ic, Vce: 45 @ 2A, 1V
• Power - Max: 1.4 W
• Frequency - Transition: 65MHz
• Operating Temperature: -65°C ~ 150°C (TJ)

Mechanical Parameters (Must Match):

• Mounting Type: Surface Mount
• Package / Case: TO-252-3, DPAK (2 Leads + Tab), SC-63
• Supplier Device Package: DPAK

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

The identified substitute parts MJD200RLG and MJD200T4G satisfy all parametric requirements and are classified as Active products, providing production continuity for the obsolete CJD200 TR13.

Parameter Comparison

Engineering Selection Recommendations

Both MJD200RLG and MJD200T4G are parametric equivalents of the obsolete CJD200 TR13, with all electrical and mechanical specifications matching exactly. The primary distinction between substitute options is product availability and manufacturer status.

MJD200RLG (onsemi): This substitute maintains Active product status with 5731 units in stock inventory. It is supplied in Tape & Reel (TR) packaging format and carries full ROHS3 compliance and REACH Unaffected certification.

MJD200T4G (onsemi): This substitute also maintains Active product status with higher inventory availability at 15483 units in stock. It is supplied in Tape & Reel (TR) packaging format and carries full ROHS3 compliance and REACH Unaffected certification.

Both parts are manufactured by onsemi and provide direct functional replacement for the CJD200 TR13 in applications requiring NPN transistors with 5A collector current, 25V breakdown voltage, and DPAK surface mount packaging. Selection between the two substitutes may be based on procurement lead time, inventory availability, and packaging quantity requirements.

Frequently Asked Questions (FAQ)

Q: Can MJD200RLG or MJD200T4G be used as direct replacements for CJD200 TR13?

A: Yes. Both MJD200RLG and MJD200T4G are parametric equivalents with identical electrical ratings (5A collector current, 25V breakdown voltage, 1.4W power dissipation, 65MHz transition frequency) and mechanical specifications (DPAK surface mount package). All compliance certifications (ROHS3, REACH Unaffected) match the original part.

Q: What is the difference between MJD200RLG and MJD200T4G?

A: Both parts are electrically and mechanically identical. The primary differences are inventory availability (MJD200T4G has 15483 units versus MJD200RLG with 5731 units) and packaging quantity per reel. Both are supplied by onsemi in Tape & Reel format.

Q: Are there any package compatibility issues when substituting these parts?

A: No. All three parts use the identical TO-252-3 DPAK (2 Leads + Tab) package designation SC-63. PCB footprints, lead spacing, and thermal tab dimensions are identical, enabling direct board-level substitution without layout modifications.

Q: Do the substitute parts have the same thermal characteristics?

A: Yes. All three parts are rated for maximum power dissipation of 1.4W and operate across the identical temperature range of -65°C to 150°C junction temperature (TJ).

Q: Are moisture sensitivity considerations the same across all three parts?

A: Yes. All three parts carry Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or reflow processing.

Q: What is the DC current gain specification for these transistors?

A: The DC current gain (hFE) minimum specification is 45, measured at collector current (Ic) of 2A and collector-emitter voltage (Vce) of 1V. This specification is identical across CJD200 TR13, MJD200RLG, and MJD200T4G.

Q: Can these parts be used in high-frequency applications?

A: These transistors are rated for transition frequency (fT) of 65MHz, suitable for applications requiring moderate frequency response. Specific application suitability depends on circuit design requirements and operating frequency.