CFM14JT360K Equivalent & Substitute Parts

Part Overview

The CFM14JT360K is a 360 kOhms ±5% 0.25W through-hole resistor manufactured by Stackpole Electronics Inc. This carbon film axial resistor features flame retardant coating and safety characteristics, designed for general-purpose electronic applications requiring reliable resistance values across industrial and commercial temperature ranges. The part is currently active in production with ROHS3 compliance. Substitute parts are identified to address packaging format availability, inventory levels, and specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

CFM14JT360K

Stackpole Electronics IncIn Stock: 867CFM14JT360K Datasheet

Current PartRFQ

CF14JT360K

Stackpole Electronics IncIn Stock: 18543CF14JT360K Datasheet

MFR RecommendedRFQ

PCF14JT360K

Stackpole Electronics IncIn Stock: 4217PCF14JT360K Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CFM14JT360K are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Resistance value: 360 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Carbon Film (exact match required)
• Temperature coefficient: 0 / -850ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)

Mechanical Compatibility Criteria:

• Package type: Axial (primary) or Axial with Radial Bend capability
• Termination count: 2 (exact match required)
• Features: Flame Retardant Coating, Safety (exact match required)

Compliance Criteria:

• RoHS Status: ROHS3 Compliant (exact match required)
• Product Status: Active (exact match required)

Substitutes differ in packaging format (Tape & Reel vs. Cut Tape vs. Panasert) and physical dimensions, which do not affect electrical performance or functional compatibility in standard through-hole applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—CFM14JT360K, CF14JT360K, and PCF14JT360K—are electrically and functionally equivalent for applications requiring a 360 kOhms ±5% 0.25W carbon film resistor. Selection between these parts is determined by packaging and supply requirements rather than electrical performance:

CFM14JT360K (Tape & Reel): Suitable for high-volume automated assembly operations where tape-and-reel packaging is required for pick-and-place equipment. Current inventory: 809 pieces.

CF14JT360K (Cut Tape): Suitable for manual assembly, prototyping, or lower-volume production runs. Cut tape format provides flexibility for component handling. Current inventory: 18,504 pieces.

PCF14JT360K (Cut Tape / Panasert): Supports both axial and radial bend configurations, offering additional mechanical flexibility for applications requiring bent leads. Panasert packaging format accommodates specialized assembly processes. Current inventory: 4,152 pieces.

All parts maintain ROHS3 compliance and active production status, ensuring long-term availability and regulatory conformance.

Frequently Asked Questions (FAQ)

Q: Are CF14JT360K and PCF14JT360K electrically identical to CFM14JT360K?

A: Yes. All three parts share identical electrical specifications: 360 kOhms resistance, ±5% tolerance, 0.25W power rating, carbon film composition, and -55°C to 155°C operating range. Differences are limited to packaging format and physical lead configuration.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated assembly lines. Cut Tape (CT) packaging provides components on cut segments of carrier tape, suitable for manual assembly or lower-volume applications.

Q: Can PCF14JT360K be used in place of CFM14JT360K in standard through-hole applications?

A: Yes. PCF14JT360K supports both axial and radial bend lead configurations. In standard axial orientation, it functions identically to CFM14JT360K. The radial bend capability provides additional flexibility for specific board layout requirements.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes. Compliance status is identical across all substitutes.

Q: Which substitute should I select for new designs?

A: Selection depends on assembly method and supply chain requirements. For automated assembly, use CFM14JT360K (Tape & Reel). For manual assembly or prototyping, use CF14JT360K (Cut Tape). For applications requiring lead bending flexibility, use PCF14JT360K (Panasert).