CE3391-100.000 Equivalent & Substitute Parts

Part Overview

The CE3391-100.000 is a 100 MHz XO (Standard) HCMOS oscillator manufactured by Crystek Corporation. This surface mount crystal oscillator operates at 3.3V with enable/disable functionality, housed in a 4-SMD, No Lead package. The device is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter set.

Substiute Parts

CE3391-100.000

Crystek CorporationIn Stock: 1005CE3391-100.000 Datasheet

Current PartRFQ

HSM613-100.0M

Connor WinfieldIn Stock: 4037HSM613-100.0M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CE3391-100.000 is determined by strict equivalence across the following critical parameters:

• Frequency: 100 MHz (exact match required)
• Output Type: HCMOS (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Function: Enable/Disable (exact match required)
• Frequency Stability: ±25ppm (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Package Type: 4-SMD, No Lead (exact match required)
• Mounting Type: Surface Mount (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The HSM613-100.0M manufactured by Connor Winfield meets all substitution criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the CE3391-100.000 and HSM613-100.0M are Active product status devices with identical compliance certifications (ROHS3, REACH Unaffected, EAR99). Selection between these parts is based on supply chain availability and dimensional constraints. The HSM613-100.0M exhibits lower maximum supply current (40mA versus 45mA) and reduced seated height (1.40mm versus 1.80mm), which may provide advantages in power-constrained or space-limited applications. Both devices maintain equivalent electrical performance and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the HSM613-100.0M be used as a direct replacement for the CE3391-100.000?

A: Yes. Both devices meet identical electrical specifications including frequency, output type, supply voltage, function, frequency stability, and operating temperature range. Both are housed in 4-SMD, No Lead packages and maintain equivalent RoHS and REACH compliance.

Q: Are there dimensional differences between these parts?

A: Yes. The HSM613-100.0M has slightly larger length (7.50mm versus 7.20mm) and reduced width (5.00mm versus 5.20mm). The seated height of the HSM613-100.0M is lower at 1.40mm compared to 1.80mm for the CE3391-100.000. PCB layout and clearance requirements must be verified for your specific application.

Q: What is the difference in current consumption?

A: The CE3391-100.000 has a maximum supply current of 45mA, while the HSM613-100.0M is rated at 40mA maximum. The HSM613-100.0M also specifies a disable mode current of 10µA. Both values are within typical operating parameters for this oscillator class.

Q: Are both parts ROHS3 compliant?

A: Yes. Both the CE3391-100.000 and HSM613-100.0M are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited) and REACH Unaffected status.

Q: What determines substitution eligibility for these oscillators?

A: Substitution is determined by exact equivalence across frequency, output type, supply voltage, enable/disable function, frequency stability, operating temperature range, package type, and compliance certifications. Dimensional variations are acceptable provided PCB layout accommodates the physical differences.