CE3292-60.000 Equivalent & Substitute Parts

Part Overview

The CE3292-60.000 is a 60 MHz XO (Standard) crystal oscillator manufactured by Crystek Corporation. This surface mount oscillator provides HCMOS and TTL output with 5V supply, Enable/Disable function, and operates across the -40°C to 85°C temperature range. The part is Active status and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same frequency, output type, supply voltage, and package configuration.

Substiute Parts

CE3292-60.000

Crystek CorporationIn Stock: 1170CE3292-60.000 Datasheet

Current PartRFQ

CB3-3I-60M000000

CTS-Frequency ControlsIn Stock: 2246CB3-3I-60M000000 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The CB3-3I-60M000000 from CTS-Frequency Controls qualifies as a direct substitute based on the following matching parameters:

• Frequency: 60 MHz (identical)
• Output Type: HCMOS, TTL (identical)
• Supply Voltage: 5V (identical)
• Function: Enable/Disable (identical)
• Frequency Stability: ±50ppm (identical)
• Operating Temperature Range: -40°C ~ 85°C (identical)
• Package Type: 4-SMD, No Lead (identical)
• Mounting Type: Surface Mount (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)

Both parts are Active status products with equivalent regulatory compliance (REACH Unaffected, EAR99 classification).

Parameter Comparison

Engineering Selection Recommendations

Both the CE3292-60.000 and CB3-3I-60M000000 are Active status products with identical regulatory compliance profiles (ROHS3 Compliant, REACH Unaffected, EAR99 classification). The parts share all critical electrical parameters including frequency, output type, supply voltage, function, and frequency stability. Physical dimensions are within acceptable tolerances for 4-SMD, No Lead surface mount packages, with identical seated heights of 0.071" (1.80mm). The CB3-3I-60M000000 demonstrates lower maximum supply current (50mA versus 60mA) and specifies disable mode current (10µA), which may provide advantages in power-constrained applications. Both parts are suitable for direct substitution in circuit designs requiring 60 MHz HCMOS/TTL oscillators with Enable/Disable functionality.

Frequently Asked Questions (FAQ)

Q: Can the CB3-3I-60M000000 be used as a direct replacement for the CE3292-60.000?

A: Yes. Both parts share identical frequency (60 MHz), output type (HCMOS, TTL), supply voltage (5V), function (Enable/Disable), frequency stability (±50ppm), operating temperature range (-40°C ~ 85°C), and package configuration (4-SMD, No Lead). Regulatory compliance and moisture sensitivity levels are equivalent.

Q: Are there physical compatibility concerns between these parts?

A: Physical dimensions differ slightly. The CE3292-60.000 measures 0.283" L x 0.205" W (7.20mm x 5.20mm), while the CB3-3I-60M000000 measures 0.276" L x 0.197" W (7.00mm x 5.00mm). Both have identical seated heights of 0.071" (1.80mm). These dimensional variations are within acceptable tolerances for standard 4-SMD, No Lead footprints and do not prevent substitution.

Q: What is the difference in current consumption between these parts?

A: The CE3292-60.000 specifies a maximum supply current of 60mA. The CB3-3I-60M000000 specifies a maximum supply current of 50mA and includes a disable mode current specification of 10µA. The lower active current of the CB3-3I-60M000000 may be beneficial in power-sensitive applications.

Q: Are both parts RoHS compliant?

A: Yes. Both the CE3292-60.000 and CB3-3I-60M000000 are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited) ratings.

Q: What is the basis for substitution between these parts?

A: Substitution is based on matching electrical specifications (frequency, output type, supply voltage, function, frequency stability, operating temperature range) and mechanical compatibility (package type, mounting type, physical dimensions, and seated height). Both parts maintain identical regulatory compliance and product status.