CE3292-16.384 Equivalent & Substitute Parts

Part Overview

The CE3292-16.384 is a 16.384 MHz XO (Standard) crystal oscillator manufactured by Crystek Corporation. This surface mount oscillator provides HCMOS and TTL output with 5V supply, Enable/Disable functionality, and operates across the -40°C to 85°C temperature range. The part is Active status and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and compliance certifications align with the original component requirements.

Substiute Parts

CE3292-16.384

Crystek CorporationIn Stock: 865CE3292-16.384 Datasheet

Current PartRFQ

CB3-3I-16M384000

CTS-Frequency ControlsIn Stock: 1794CB3-3I-16M384000 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CE3292-16.384 is determined by strict alignment of the following parameters:

• Frequency: 16.384 MHz (exact match required)
• Output: HCMOS, TTL (exact match required)
• Supply Voltage: 5V (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature: -40°C ~ 85°C (exact match required)
• Function: Enable/Disable (exact match required)
• Package: 4-SMD, No Lead (exact match required)
• Mounting: Surface Mount (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• MSL Rating: 1 (Unlimited) (exact match required)

The CB3-3I-16M384000 from CTS-Frequency Controls meets all substitution criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the CE3292-16.384 and CB3-3I-16M384000 are Active status components with identical ROHS3 compliance and REACH unaffected certifications. The CB3-3I-16M384000 demonstrates lower maximum supply current (25mA versus 60mA), which may provide operational advantages in power-constrained applications. Both parts carry EAR99 classification and MSL 1 rating, indicating equivalent handling and storage requirements. Selection between these parts should be based on supply chain availability, lead time, and application-specific power budget considerations.

Frequently Asked Questions (FAQ)

Q: Can the CB3-3I-16M384000 be used as a direct replacement for the CE3292-16.384?

A: Yes. Both parts share identical frequency (16.384 MHz), output type (HCMOS, TTL), supply voltage (5V), frequency stability (±50ppm), operating temperature range (-40°C ~ 85°C), function (Enable/Disable), and package configuration (4-SMD, No Lead). Compliance certifications and moisture sensitivity ratings are equivalent.

Q: What are the physical differences between these parts?

A: The CE3292-16.384 measures 0.283" L x 0.205" W (7.20mm x 5.20mm), while the CB3-3I-16M384000 measures 0.276" L x 0.197" W (7.00mm x 5.00mm). Both share identical seated height of 0.071" (1.80mm). The dimensional variance is within typical PCB layout tolerances for 4-SMD, No Lead packages.

Q: Are there power consumption differences?

A: The CE3292-16.384 specifies maximum supply current of 60mA, while the CB3-3I-16M384000 specifies 25mA. The CTS part also provides a disable current specification of 10µA. These differences do not affect functional compatibility but may influence power budget calculations in the application circuit.

Q: Do both parts require identical handling and storage procedures?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Storage and handling procedures are equivalent.

Q: Are there any compliance or regulatory differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. Compliance profiles are identical.