CDV30FK302JO3F Equivalent & Substitute Parts

Part Overview

The CDV30FK302JO3F is a 3000 pF mica capacitor rated for 2.5 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable dielectric characteristics across the operating temperature range of -55°C to 125°C. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Substitute parts may be required due to inventory availability, compliance requirements, or specific application constraints.

Substiute Parts

CDV30FK302JO3F

Cornell Dubilier Electronics (CDE)In Stock: 711CDV30FK302JO3F Datasheet

Current PartRFQ

CDV30FK302JO3

Cornell Dubilier Electronics (CDE)In Stock: 1253CDV30FK302JO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV30FK302JO3F is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 3000 pF (exact match required)
• Voltage Rating: 2.5 kV (exact match required)
• Tolerance: ±5% (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)

The substitute part CDV30FK302JO3 meets all parametric equivalence criteria. Differences in compliance status (RoHS and REACH) and inventory levels do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

CDV30FK302JO3F is the primary selection for applications requiring ROHS3 compliance and REACH unaffected status. This part is suitable for regulated environments and end-use applications subject to environmental directives.

CDV30FK302JO3 serves as a parametric equivalent for applications where RoHS3 compliance is not a requirement. This substitute maintains identical electrical and mechanical specifications, including capacitance, voltage rating, tolerance, dielectric material, temperature range, and mounting configuration. Selection between these parts depends solely on compliance requirements applicable to the end application.

Both parts are active products from the same manufacturer and series, ensuring consistent performance and availability.

Frequently Asked Questions (FAQ)

Q: Can CDV30FK302JO3 be used in place of CDV30FK302JO3F?

A: Yes, CDV30FK302JO3 is a parametric equivalent. All electrical and mechanical specifications are identical. The selection depends on compliance requirements: use CDV30FK302JO3F for ROHS3-compliant applications, and CDV30FK302JO3 for applications without RoHS3 requirements.

Q: Are there any differences in physical dimensions or lead spacing?

A: No. Both parts are radial through-hole components in the CDV30 series with identical mounting characteristics.

Q: What is the tolerance specification for both parts?

A: Both parts have a tolerance of ±5%, ensuring equivalent capacitance accuracy.

Q: Do both parts operate across the same temperature range?

A: Yes. Both parts operate from -55°C to 125°C.

Q: Which part should be selected for new designs?

A: For new designs subject to environmental regulations, CDV30FK302JO3F (ROHS3 compliant) is the appropriate selection. For legacy or non-regulated applications, either part is suitable based on availability.

Q: Are both parts manufactured by the same company?

A: Yes. Both parts are manufactured by Cornell Dubilier Electronics (CDE) and belong to the CDV30 series.