CDV30FH622FO3 Equivalent & Substitute Parts

Part Overview

The CDV30FH622FO3 is a 6200 pF mica capacitor rated for 1.5 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable capacitance across extended temperature ranges. The part is currently active in production with 1119 units in stock. Identification of equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and address specific compliance requirements for end-use applications.

Substiute Parts

CDV30FH622FO3

Cornell Dubilier Electronics (CDE)In Stock: 1139CDV30FH622FO3 Datasheet

Current PartRFQ

CDV30FH622FO3F

Cornell Dubilier Electronics (CDE)In Stock: 716CDV30FH622FO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDV30FH622FO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 6200 pF (exact match required)
• Tolerance: ±1% (ensures circuit performance specifications)
• Voltage Rating: 1.5 kV (maintains electrical safety and reliability)
• Dielectric Material: Mica (preserves temperature stability and frequency characteristics)
• Operating Temperature Range: -55°C ~ 125°C (ensures functionality across specified conditions)
• Mounting Type: Through Hole (maintains PCB assembly compatibility)
• Package Configuration: Radial (ensures mechanical fit and lead spacing compatibility)

The identified substitute part maintains identical electrical and mechanical specifications while differing in regulatory compliance status. Substitution is valid only when all parameters listed above are matched.

Parameter Comparison

Engineering Selection Recommendations

CDV30FH622FO3 is appropriate for applications where RoHS non-compliance is acceptable and REACH-affected material sourcing is permissible. This part maintains full electrical and mechanical compatibility with designs specified for the CDV30 series 6200 pF, 1.5 kV mica capacitor.

CDV30FH622FO3F is the compliant alternative, offering ROHS3 compliance and REACH-unaffected status while maintaining identical electrical performance and mechanical form factor. Selection of this variant is required for applications subject to RoHS3 or REACH regulatory frameworks.

Both parts are active products from the same manufacturer and series, ensuring consistent quality and performance characteristics. The choice between them is determined solely by regulatory and compliance requirements of the end application, not by electrical or mechanical performance differences.

Frequently Asked Questions (FAQ)

Q: Can CDV30FH622FO3F be used as a direct replacement for CDV30FH622FO3?

A: Yes. Both parts are electrically and mechanically identical. The CDV30FH622FO3F differs only in regulatory compliance status (ROHS3 compliant and REACH unaffected). Direct substitution is valid for all circuit applications where the original part was specified.

Q: What is the primary difference between these two part numbers?

A: The primary difference is regulatory compliance. CDV30FH622FO3 is RoHS non-compliant and REACH affected. CDV30FH622FO3F is ROHS3 compliant and REACH unaffected. All electrical parameters, capacitance values, voltage ratings, temperature ranges, and physical packaging are identical.

Q: Are there any performance differences between the two parts?

A: No. Both parts deliver identical electrical performance. Capacitance, tolerance, voltage rating, temperature stability, and dielectric characteristics are equivalent across both part numbers.

Q: Which part should be selected for new designs?

A: Selection depends on the regulatory requirements of the target market and application. For applications requiring RoHS3 or REACH compliance, specify CDV30FH622FO3F. For applications without these compliance requirements, either part is acceptable.

Q: Is the radial through-hole package the same for both parts?

A: Yes. Both parts use identical radial through-hole packaging and mounting configuration, ensuring mechanical compatibility with existing PCB designs.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 125°C, providing stable capacitance performance across this extended temperature range.

Q: Are both parts currently in production?

A: Yes. Both CDV30FH622FO3 and CDV30FH622FO3F are active products in the Cornell Dubilier Electronics CDV30 series with current inventory availability.