CDV30FH362JO3F Equivalent & Substitute Parts

Part Overview

The CDV30FH362JO3F is a 3600 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE) rated for 1.5 kV operation. This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable dielectric characteristics across extended temperature ranges. The part is currently active in production with ROHS3 compliance certification. Substitute parts are identified when inventory constraints, compliance requirements, or procurement lead times necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

CDV30FH362JO3F

Cornell Dubilier Electronics (CDE)In Stock: 912CDV30FH362JO3F Datasheet

Current PartRFQ

CDV30FH362JO3

Cornell Dubilier Electronics (CDE)In Stock: 1144CDV30FH362JO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV30FH362JO3F is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 3600 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage rating: 1.5 kV (minimum requirement; higher ratings acceptable)
• Dielectric material: Mica (exact match required)

Mechanical Parameters:

• Mounting type: Through Hole (exact match required)
• Package configuration: Radial (exact match required)
• Series family: CDV30 (same manufacturer series)

Environmental Parameters:

• Operating temperature range: -55°C to 125°C (minimum requirement; extended ranges acceptable)

Compliance Parameters:

• ECCN classification: EAR99 (exact match required)
• HTSUS code: 8532.29.0020 (exact match required)

Substitute parts must satisfy all electrical and mechanical parameters. Compliance status variations are noted for procurement and regulatory considerations.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: CDV30FH362JO3F

The CDV30FH362JO3F is the preferred component for new designs and applications requiring regulatory compliance. This part carries ROHS3 certification and REACH Unaffected status, meeting current environmental and hazardous substance directives applicable to electronic components in most jurisdictions.

Alternative Selection: CDV30FH362JO3

The CDV30FH362JO3 provides electrical and mechanical equivalence with identical capacitance, voltage rating, temperature performance, and dielectric characteristics. This substitute is suitable for applications where RoHS3 compliance is not a procurement requirement. The REACH Affected status indicates this part contains substances of concern and requires appropriate regulatory documentation for specific end-use applications.

Both parts are active products from the same manufacturer series, ensuring consistent quality and performance characteristics. Selection between these parts should be based on compliance requirements of the target application and regulatory jurisdiction rather than electrical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can CDV30FH362JO3 be used as a direct replacement for CDV30FH362JO3F?

A: The CDV30FH362JO3 is electrically and mechanically equivalent. Both parts share identical capacitance (3600 pF), voltage rating (1.5 kV), tolerance (±5%), dielectric material (mica), operating temperature range (-55°C to 125°C), and radial through-hole package configuration. The primary difference is compliance status: CDV30FH362JO3F is ROHS3 compliant while CDV30FH362JO3 is not. Substitution is valid when RoHS3 compliance is not mandated.

Q: What are the critical parameters that must match for substitution?

A: Substitution requires exact equivalence in capacitance value (3600 pF), tolerance (±5%), voltage rating (1.5 kV minimum), dielectric material (mica), mounting type (through hole), and package configuration (radial). All these parameters must be identical between the main part and substitute.

Q: Are there any differences in physical dimensions or lead spacing?

A: Lead spacing and detailed dimensional data are not provided in the component specifications. Both parts are radial through-hole packages from the same CDV30 series manufactured by Cornell Dubilier Electronics, indicating consistent mechanical form factors.

Q: What is the significance of the REACH Affected status on the substitute part?

A: REACH Affected status indicates the component contains substances of concern regulated under the REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) directive. This requires appropriate documentation and may restrict use in certain applications or geographic markets. The main part (CDV30FH362JO3F) is REACH Unaffected, providing broader regulatory flexibility.

Q: Can I use a higher voltage-rated capacitor as a substitute?

A: Substitution criteria require the voltage rating to meet or exceed 1.5 kV. Higher voltage ratings are acceptable from an electrical standpoint. However, only the CDV30FH362JO3 and CDV30FH362JO3F are specified as direct equivalents in this reference. Any other part number must be evaluated independently against all critical parameters.

Q: What inventory levels are available for each part?

A: CDV30FH362JO3F has 859 pieces in stock. CDV30FH362JO3 has 1084 pieces in stock. Both parts are available as new original components in bulk packaging.