CDV30FH221JO3 Equivalent & Substitute Parts

Part Overview

The CDV30FH221JO3 is a 220 pF mica capacitor rated for 1.5 kV with ±5% tolerance, manufactured by Cornell Dubilier Electronics (CDE). This component is designed for general-purpose through-hole applications requiring high-voltage performance in radial configuration. The part is currently active in production. Finding substitute components becomes necessary when managing inventory levels, addressing supply chain constraints, or when upgraded compliance certifications are required for new designs.

Substiute Parts

CDV30FH221JO3

Cornell Dubilier Electronics (CDE)In Stock: 988CDV30FH221JO3 Datasheet

Current PartRFQ

CDV30FH221JO3F

Cornell Dubilier Electronics (CDE)In Stock: 945CDV30FH221JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDV30FH221JO3 is based on electrical and mechanical parameter matching across the following criteria:

• Capacitance Value: 220 pF (exact match required)
• Tolerance: ±5% (matching tolerance specification)
• Voltage Rating: 1.5 kV (minimum voltage requirement)
• Dielectric Material: Mica (material-specific performance characteristics)
• Operating Temperature Range: -55°C to 125°C (thermal compatibility)
• Mounting Type & Package: Through Hole, Radial configuration (PCB layout compatibility)
• Lead Spacing: 0.437" (11.10 mm) (mechanical fit requirement)
• Physical Dimensions: 0.772" L × 0.252" W (19.60 mm × 6.40 mm) (board space requirements)

The CDV30FH221JO3F meets all of these parameters identically and is therefore classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

The CDV30FH221JO3F serves as a direct parametric equivalent to the CDV30FH221JO3, with identical electrical and mechanical specifications. The primary distinction between these two parts lies in regulatory compliance status. The CDV30FH221JO3F achieves ROHS3 compliance and REACH Unaffected status, whereas the original CDV30FH221JO3 is RoHS non-compliant and REACH Affected. For designs requiring environmental compliance certification or for manufacturers implementing restricted substance protocols, the CDV30FH221JO3F is the appropriate selection. Both parts are currently in active production status and both carry the same ECCN and HTSUS classifications.

Frequently Asked Questions (FAQ)

Q: Can the CDV30FH221JO3F be used as a direct replacement for the CDV30FH221JO3?

A: Yes. The CDV30FH221JO3F is a parametric equivalent with identical capacitance (220 pF), tolerance (±5%), voltage rating (1.5 kV), dielectric material (mica), operating temperature range (-55°C to 125°C), mounting type (through hole), and physical dimensions. Both parts fit the same PCB layout without modification.

Q: What is the difference between these two parts?

A: The parts are electrically and mechanically identical. The CDV30FH221JO3F offers improved regulatory compliance, being ROHS3 compliant and REACH Unaffected, compared to the non-compliant status of the original part.

Q: Are the lead spacing and physical dimensions identical?

A: Yes. Both parts feature identical lead spacing of 0.437" (11.10 mm) and the same physical dimensions of 0.772" L × 0.252" W (19.60 mm × 6.40 mm) with a maximum seated height of 0.850" (21.60 mm).

Q: Which part should be selected for new product designs?

A: Selection depends on design requirements. For designs requiring RoHS3 compliance or REACH compliance, the CDV30FH221JO3F is the specified choice. For legacy designs or applications without compliance restrictions, either part meets the electrical and mechanical requirements.

Q: Are both parts currently available?

A: Yes. The CDV30FH221JO3 has 899 pieces in stock, and the CDV30FH221JO3F has 859 pieces in stock, both as new original inventory.