CDV30FF622JO3 Equivalent & Substitute Parts

Part Overview

The CDV30FF622JO3 is a 6200 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE). This component is actively produced and suitable for general-purpose applications requiring high voltage and temperature stability. Alternative models become necessary when sourcing constraints occur or when compliance requirements differ between manufacturing batches.

Substiute Parts

CDV30FF622JO3

Cornell Dubilier Electronics (CDE)In Stock: 962CDV30FF622JO3 Datasheet

Current PartRFQ

CDV30FF622JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1062CDV30FF622JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDV30FF622JO3 is determined by strict equivalence across the following electrical and mechanical parameters:

• Capacitance Value: Must equal 6200 pF
• Tolerance Range: Must be ±5%
• Voltage Rating: Must be 1 kV or higher
• Dielectric Material: Must be Mica
• Operating Temperature Range: Must span -55°C ~ 125°C
• Mounting Type: Must be Through Hole
• Package Configuration: Must be Radial

The CDV30FF622JO3F meets all these criteria and belongs to the same CDV30 series, ensuring direct substitution capability.

Parameter Comparison

Engineering Selection Recommendations

Both the CDV30FF622JO3 and CDV30FF622JO3F are interchangeable for applications requiring equivalent electrical and mechanical specifications. The primary distinction is regulatory compliance:

• CDV30FF622JO3: RoHS non-compliant; REACH Affected status requires environmental assessment for end-use applications.
• CDV30FF622JO3F: RoHS3 Compliant; REACH Unaffected status. This variant is recommended for applications subject to EU regulatory requirements or where RoHS compliance is mandated.

Component selection should be based on the regulatory environment of the target application. Both parts carry Active product status and maintain equivalent availability (931 and 1031 units respectively in stock).

Frequently Asked Questions (FAQ)

Q: Can CDV30FF622JO3F replace CDV30FF622JO3 in an existing design? A: Yes. The parts are electrically and mechanically identical across all specified parameters including capacitance, voltage rating, tolerance, temperature range, and package configuration.

Q: What is the difference between these two part numbers? A: The electrical and mechanical specifications are identical. The difference lies in regulatory compliance: CDV30FF622JO3F is RoHS3 Compliant and REACH Unaffected, while CDV30FF622JO3 is RoHS non-compliant and REACH Affected.

Q: Are there any lead spacing or dimensional differences? A: No. Both parts are radial package through-hole components with identical mechanical configurations.

Q: Which part should I specify for new designs? A: CDV30FF622JO3F is recommended for new designs, as it carries RoHS3 compliance and REACH Unaffected status, ensuring compatibility with current regulatory frameworks.

Q: Is the temperature operating range the same? A: Yes. Both parts operate across -55°C ~ 125°C and are suitable for identical thermal environments.