CDV30FF501JO3 Equivalent & Substitute Parts

Part Overview

The CDV30FF501JO3 is a 500 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial component is designed for general-purpose applications requiring stable capacitance and high voltage performance across an operating temperature range of -55°C to 125°C. The part is currently active in production with 1156 units in stock. Identifying equivalent substitute parts is necessary to ensure supply chain continuity, accommodate compliance requirements, and maintain design flexibility across manufacturing batches.

Substiute Parts

CDV30FF501JO3

Cornell Dubilier Electronics (CDE)In Stock: 1171CDV30FF501JO3 Datasheet

Current PartRFQ

CDV30FF501JO3F

Cornell Dubilier Electronics (CDE)In Stock: 826CDV30FF501JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV30FF501JO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 500 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 1 kV (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Series Family: CDV30 (exact match required)

The substitute part CDV30FF501JO3F meets all electrical and mechanical parameters specified above. Differences in RoHS compliance status and REACH classification do not affect functional equivalence but may impact procurement and regulatory requirements depending on end-use application and regional standards.

Parameter Comparison

Engineering Selection Recommendations

CDV30FF501JO3 is the primary part specification for applications where RoHS non-compliance is acceptable and REACH-affected material sourcing is permissible. This variant maintains full electrical and mechanical compatibility with the CDV30 series standard.

CDV30FF501JO3F is the substitute part for applications requiring ROHS3 compliance and REACH-unaffected material sourcing. This variant is functionally equivalent across all electrical parameters and mechanical specifications. Selection of this variant is appropriate when regulatory compliance with RoHS3 standards is mandatory or when procurement policies restrict REACH-affected components.

Both parts are active products from Cornell Dubilier Electronics with confirmed inventory availability. The choice between variants depends solely on compliance requirements and material sourcing policies applicable to the end application.

Frequently Asked Questions (FAQ)

Q: Are CDV30FF501JO3 and CDV30FF501JO3F electrically identical?

A: Yes. Both parts have identical capacitance (500 pF), tolerance (±5%), voltage rating (1 kV), dielectric material (mica), operating temperature range (-55°C ~ 125°C), and all other electrical specifications. They are functionally interchangeable in circuit applications.

Q: What is the difference between these two part numbers?

A: The primary differences are compliance certifications. CDV30FF501JO3F is ROHS3 compliant and REACH unaffected, while CDV30FF501JO3 is RoHS non-compliant and REACH affected. Both share identical electrical and mechanical parameters.

Q: Can I use CDV30FF501JO3F as a direct replacement for CDV30FF501JO3?

A: Yes, CDV30FF501JO3F is a direct substitute. All electrical specifications, mechanical dimensions, mounting configuration, and performance characteristics are identical. The substitution is valid from a functional and compatibility standpoint.

Q: Which part should I specify for new designs?

A: Specify CDV30FF501JO3F for new designs if your application or regional market requires ROHS3 compliance or mandates REACH-unaffected components. Specify CDV30FF501JO3 if compliance requirements do not restrict REACH-affected materials.

Q: Are both parts available in the same packaging?

A: Yes. Both CDV30FF501JO3 and CDV30FF501JO3F are supplied in bulk packaging as through-hole radial components with identical physical configuration.

Q: What is the lead spacing for these capacitors?

A: Lead spacing information is not specified in the available technical parameters for either part.

Q: Do these parts have moisture sensitivity concerns?

A: No. Moisture Sensitivity Level (MSL) is not applicable to both CDV30FF501JO3 and CDV30FF501JO3F, indicating these mica capacitors do not require moisture-controlled storage or handling.