CDV30FF362JO3 Equivalent and Substitute Parts

Part Overview

The CDV30FF362JO3 is a 3600 pF mica capacitor rated at 1 kV for through-hole radial mounting. This component serves general-purpose applications requiring high-voltage, low-loss energy storage with excellent temperature stability across the -55°C to 125°C operating range. As an active product with 1131 units in inventory, substitute identification becomes necessary when stock depletion occurs or when compliance requirements necessitate alternative variants within the same electrical and mechanical class.

Substiute Parts

CDV30FF362JO3

Cornell Dubilier Electronics (CDE)In Stock: 1230CDV30FF362JO3 Datasheet

Current PartRFQ

CDV30FF362JO3F

Cornell Dubilier Electronics (CDE)In Stock: 843CDV30FF362JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV30FF362JO3 is determined by electrical and mechanical parameter equivalence within the Cornell Dubilier Electronics CDV30 series. The following parameters establish substitution criteria:

• Capacitance value: 3600 pF (exact match required)
• Voltage rating: 1 kV (minimum threshold; equal or higher ratings acceptable)
• Tolerance: ±5% (same or tighter tolerance acceptable)
• Dielectric material: Mica (required for performance characteristics)
• Mounting configuration: Through-hole radial (mechanical compatibility)
• Operating temperature range: -55°C ~ 125°C (minimum range requirement)
• Series classification: CDV30 (ensures package and footprint compatibility)

The identified substitute meets all electrical and mechanical criteria for direct circuit-board replacement without modification to PCB design or assembly procedures.

Parameter Comparison

Engineering Selection Recommendations

The CDV30FF362JO3F offers identical electrical and mechanical performance to the CDV30FF362JO3 with enhanced compliance certification. Selection between these two variants should be determined by regulatory requirements of the target application:

• CDV30FF362JO3: Applicable to applications where RoHS non-compliance and REACH-affected material status are acceptable within system constraints.
• CDV30FF362JO3F: Required for designs mandating ROHS3 compliance and REACH-unaffected material composition.

Both variants maintain equivalent circuit performance and mechanical interchangeability within the CDV30 series footprint.

Frequently Asked Questions (FAQ)

Q: Can CDV30FF362JO3F replace CDV30FF362JO3 in an existing circuit? A: Yes. The CDV30FF362JO3F is electrically and mechanically equivalent. No circuit modifications are necessary. Substitution is a direct board-level replacement.

Q: What are the key differences between these two parts? A: The primary differences are regulatory compliance certifications. The CDV30FF362JO3F is ROHS3 compliant and REACH unaffected, while the CDV30FF362JO3 does not carry these certifications. All electrical specifications remain identical.

Q: Are there inventory considerations when selecting between these parts? A: The CDV30FF362JO3 has 1131 units in stock compared to 807 units for the CDV30FF362JO3F. Availability may influence selection if project timelines are critical.

Q: Does mounting orientation differ between these variants? A: No. Both parts use identical through-hole radial mounting. PCB footprints, lead spacing, and assembly procedures are equivalent.

Q: What applications require the ROHS3-compliant variant? A: Designs intended for sale in regions with RoHS regulations, European markets, or systems with explicit compliance documentation requirements should specify the CDV30FF362JO3F.