CDV30FF361JO3 Mica Capacitor 360 pF 1 kV Radial Equivalent & Substitute Parts

Part Overview

The CDV30FF361JO3 is a 360 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial component is classified as a general-purpose mica capacitor with an operating temperature range of -55°C to 125°C and a capacitance tolerance of ±5%. The part is currently active in production with 812 pieces available in stock. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate different compliance requirements across manufacturing environments.

Substiute Parts

CDV30FF361JO3

Cornell Dubilier Electronics (CDE)In Stock: 874CDV30FF361JO3 Datasheet

Current PartRFQ

CDV30FF361JO3F

Cornell Dubilier Electronics (CDE)In Stock: 775CDV30FF361JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CDV30FF361JO3 are identified based on strict electrical and mechanical parameter matching. The substitution criteria are:

• Capacitance Value: 360 pF (exact match required)
• Capacitance Tolerance: ±5% (exact match required)
• Voltage Rating: 1 kV (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Manufacturer Series: CDV30 (exact match required)

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Variations in compliance certifications (RoHS status, REACH status) do not affect electrical or mechanical compatibility and are noted separately for procurement and regulatory purposes.

Parameter Comparison

Engineering Selection Recommendations

The CDV30FF361JO3 and CDV30FF361JO3F are parametric equivalents with identical electrical and mechanical specifications. Selection between these parts should be based on compliance requirements and regulatory status:

CDV30FF361JO3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected material sourcing is permissible. This part maintains full availability with 812 units in stock.

CDV30FF361JO3F is the appropriate selection for designs requiring ROHS3 compliance and REACH-unaffected material sourcing. This variant is available with 704 units in stock and provides regulatory alignment for markets with strict environmental compliance mandates.

Both parts share identical electrical performance, temperature stability, voltage rating, and physical form factor. The choice between them is determined by end-product regulatory requirements and supply chain compliance policies, not by functional performance.

Frequently Asked Questions (FAQ)

Q: Are CDV30FF361JO3 and CDV30FF361JO3F electrically interchangeable?

A: Yes. Both parts have identical capacitance (360 pF), tolerance (±5%), voltage rating (1 kV), dielectric material (mica), operating temperature range (-55°C ~ 125°C), and mounting configuration (through-hole radial). They perform identically in circuit applications.

Q: What is the difference between these two part numbers?

A: The primary differences are compliance certifications. CDV30FF361JO3F is ROHS3 compliant and REACH unaffected, while CDV30FF361JO3 is RoHS non-compliant and REACH affected. Electrical and mechanical specifications are identical.

Q: Which part should I specify for a new design?

A: Specify CDV30FF361JO3F if your design or end-market requires ROHS3 compliance or REACH-unaffected material sourcing. Specify CDV30FF361JO3 if compliance requirements permit and cost or availability is a primary consideration.

Q: Can I use these parts interchangeably in existing designs?

A: Yes, provided your application and regulatory environment permit the compliance status of the selected part. No circuit redesign or board layout modification is required.

Q: Are there any physical dimension differences between these parts?

A: No. Both parts are radial through-hole components in the CDV30 series with identical package configuration and lead spacing.

Q: What is the lead spacing for these capacitors?

A: Lead spacing information is not specified in the available technical parameters for this product category.

Q: Are these parts suitable for high-temperature applications?

A: Both parts operate across the temperature range -55°C to 125°C. Applications requiring operation outside this range require alternative component selection.

Q: What is the moisture sensitivity level for these capacitors?

A: Moisture sensitivity level is not applicable for mica dielectric capacitors in this series.